Engineering Structures Impact Factor Jobs in Buckley, WA

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Job Description

The Boeing Commercial Airplanes Liaison Engineering Organization is seeking Consultant (Level 5) Liaison Engineers to support operations in Everett, Seattle, Auburn, and or Renton Washington. We are looking for a proactive individual who can make prompt engineering decisions and who want to go beyond their desk and into the factory for hands on engineering.

This position requires excellent communication and collaboration skills as the candidate will be partnering closely with production personnel.  The candidate will be the engineering representative on the factory floor transforming design into reality.

Position Responsibilities: 

• Analyzes, conducts root cause analysis and develops dispositions for production non-conformances.
• Applies knowledge of Boeing design principles to assess and resolve product/process issues through the product lifecycle.
• Applies engineering principles to research technical, operational and quality issues in support of executing final engineering solutions.
• Identifies documents, analyzes reported problems and communicates deviations that could impact design intent and safety; recommends and manages resolution.
• Develops and implements product/process improvements.
• Supports Integrated Product Teams (IPT) and participates in design reviews.
• Represents the engineering community from initial build through the production and post-production environment.
• Ensures supplier and build partner compliance with Boeing standards.
• Develops customer correspondence for continued safe operation and maintenance of equipment.
• Participates in on-site disabled product repair teams, accident investigation and support teams.
• Analyzes damage repair or structural modification to determine appropriate jacking and shoring, prevent collateral damage and assure a safe work environment.
• Designs interim structural repairs and conducts static strength analysis.
• Develops non-destructive test procedures, tools and standards.

This position is fully onsite. The selected candidate will be required to work onsite at one of the listed locations. This position involves daily exposure to factory environment which includes stairs, trip hazards, high noise areas, chemical hazards (breathing and handling), and entering airplanes during their many stages of build.

This position participates in the approximately 9-month Boeing Company Training Rotation Program, which may involve assignments to the first, second, or third shift, as well as weekend or daily overtime. The specific requirements for shift assignments and overtime vary between sites and are typically covered on a rotation basis. Additionally, there may be travel involved between Boeing Puget Sound sites during the training rotation.

Basic Qualifications (Required Skills/Experience): 

• Bachelor's or Masters of Science Degree from an ABET OR ABET equivalent accredited course of study in Engineering
• 14+ years of experience in structures, systems, design, or production engineering

Preferred Qualifications (Desired Skills/Experience): 

• Hands-on experience with materials and manufacturing processes.
• Prior BCA Engineering Material Review Board (MRB) Certification

Conflict of Interest:

 Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment 
process

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.  

Shift:

This position is for multiple shifts and may require off shift, weekend, and travel assignments.

The candidate may periodically be assigned to first, second, or third shift as well as weekend or daily overtime. This requirement varies from site to site and is typically covered on a rotation basis.

Union:

This is a union represented position.

In locations where SPEEA representation applies, this job family will be covered by the terms of the collective bargaining agreement. Applicable and appropriate educational/certification credentials from an accredited institution and/or equivalent experience is required.
 

Pay and Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

• Summary pay range for Expert (level 5): $165,750 - $224,250

Applications for this position will be accepted until Mar. 20, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing is seeking an experienced and dedicated Software Certification Engineer to lead our engineering team in the critical mission of developing and certifying safe, reliable, and innovative aircraft. This role is paramount in ensuring that our aircraft not only meet but exceed the rigorous safety standards set forth by the Federal Aviation Administration (FAA). The Software Certification Engineer will play a vital role in fostering a culture of safety and excellence, making significant contributions to the certification process that underpins the trust of our customers and the flying public.

Why This Role is Important:

The Software Certification Engineer is a cornerstone of Boeing's unwavering commitment to safety and excellence in aviation. This role is crucial in ensuring that our aircraft not only meet the regulatory standards set by the FAA but also embody the highest levels of safety and reliability. By partnering closely with the FAA, the Software Certification Engineer will help shape the future of aviation, driving innovation while safeguarding the trust of our customers and the flying public.

Join us in our mission to connect, protect, explore, and inspire the world through aerospace innovation. Apply today to be part of a team that is dedicated to setting the standard for safety and excellence in the aerospace industry!

Position Responsibilities:

• Lead and manage a team of engineers focused on the design, analysis, and testing of aircraft systems and components, with an unwavering commitment to safety.
• Cultivate a safety-first mindset within the engineering unit, ensuring that all engineering practices prioritize the well-being of passengers and crew.
• Collaborate closely with the FAA to navigate the complex certification process, ensuring that all aircraft designs comply with stringent regulatory requirements and safety standards.
• Develop and implement engineering strategies that emphasize safety and reliability, aligning with Boeing’s commitment to delivering the highest quality aircraft.
• Serve as the primary liaison for FAA representatives, facilitating transparent communication and collaboration throughout the certification journey.
• Oversee the preparation and submission of comprehensive technical documentation required for FAA certification, ensuring that all materials reflect the highest standards of accuracy and thoroughness.
• Mentor and develop engineering staff, instilling a deep understanding of safety protocols and certification processes to enhance their professional growth and technical expertise.
• Analyze and resolve complex engineering challenges with a focus on safety, leveraging data-driven decision-making and industry best practices.
• Monitor project progress and performance, ensuring that engineering solutions are delivered on time and meet all safety and certification milestones.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet export control compliance requirements. To meet export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.15 is required.  “U.S. Person” includes U.S. Citizen, lawful permanent resident, refugee, or asylee. 

Basic Qualifications (Required Skills/Experience):

• Bachelor's Degree
• 5+ years of experience as a Designated Engineering Representative (DER) or Technical Standard Order (TSO) Certification Specialist.
• 9+ years of experience in RTCA DO-178(B/C) Software Considerations in Airborne Systems and Equipment Certification
• 5+ years’ experience in software engineering

Preferred Qualifications (Desired Skills/Experience):

• Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science
• 12+ years related work experience or an equivalent combination of education and experience
• Current Designated Engineering Representative (DER) or Technical Standard Order (TSO) Certification Specialist
• Experience with concurrent software and distributed systems
• 12+ years’ experience in software development life cycles, configuration management and best agile software engineering practices
• 9+ years’ experience developing, documenting and maintaining architectures, requirements, algorithms, interfaces and designs for software systems
• 9+ years’ experience leading software development projects
• Leads activities to develop, document and maintain architectures, requirements, algorithms, interfaces and designs for software systems
• Leads development, selection, tailoring and deployment of processes, tools and metrics
• Experience using common software version control tools such as Git
• Experience with Agile planning tool such as JIRA, TSF

Drug Free Workplace: Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union: This is a union-represented position

Pay & Benefits: 
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Summary Pay Range – Level 4 (Senior) - $136,850 - $185,150
Summary Pay Range – Level 5 (Lead) - $167,450 - $226,550

Applications for this position will be accepted until Mar. 25, 2026

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Tooling and Machined Parts to join our Quality team in Puget Sound in Washington.

As an Inspector for Tooling and Machined Parts, you will be essential in ensuring the highest standards of quality and safety in our manufacturing processes. Your keen attention to detail will enable you to conduct thorough inspections of tooling and machined parts, verifying compliance with stringent specifications and quality standards. To excel in this role, it is important to note that employees must pass visual acuity and color perception eye examination tests to ensure accuracy in evaluations. You will collaborate closely with engineering and quality assurance teams to identify and resolve any discrepancies, ensuring that all components meet operational requirements. Your expertise will also be critical in performing audits and surveillance of manufacturing processes, contributing to continuous improvement initiatives.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Obtain daily work assignments from the team leader or supervisor and review work orders and blueprints to determine required tasks.

• Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells.

• Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required.

• Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives.

• Initiate and document any nonconforming materials or assemblies according to specifications and procedures.

• Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance.

• Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements.

• Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies.

• Inspect mockups of engineering design changes to ensure adherence to specifications.

• Perform line checks to investigate whether rejectable conditions exist on other assemblies or airplanes.

• Indicate Quality Assurance acceptance by stamping the appropriate paperwork and processing completed records.

• Review previously accepted systems, customer requirements, or FAA conformities to determine if re-inspection is required.

• Work with engineering and the FAA on red label equipment to ensure proper segregation from production parts.

• Document discrepancies and report them to the appropriate personnel for resolution.

• Assist in the training and instruction of lower-grade inspectors, providing guidance as needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work on-site at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 3+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).

• 3+ years of experience in setting and using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators.

• 1+ years of experience calibrating and/or using coordinate measurement machines, laser trackers, and/or optical measurement devices.

• Experience as a Quality Inspector.

• Experience working with Microsoft Office (Excel, Word, PowerPoint).

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Ability to complete Fall Protection Training.

Preferred Qualifications:

• Experience inspecting welds / welds certification

• Equivalent education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.)

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $31.32/hour, with potential to earn up to $59.47/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 27, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Electronic Technician to join our Electronics team in Auburn & Puyallup , Washington.

In this role, you will be empowered to apply your technical expertise and creativity to solve complex challenges in cutting-edge aerospace technology. You’ll work with a diverse team to develop, test, and maintain advanced electronic systems that are critical to the success of our aircraft. This position offers a dynamic environment where innovation, precision, and continuous learning are valued, giving you the chance to grow your skills while making a tangible impact on aviation excellence.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Perform electronic and software testing, diagnosis, troubleshooting, adjustment, repair, calibration, checkout, and maintenance of electronic systems and associated equipment, often developing and improvising service procedures as needed.

• Fabricate, assemble, and test developmental and prototype mechanical, electrical, electromechanical, and electronic assemblies, including those utilizing software/firmware applications.

• Lead, instruct, and review the work of employees in lower classifications assigned to fabricate, assemble, test, calibrate, repair, modify, maintain, and service electronic equipment and systems.

• Operate and utilize test equipment, instruments, tools, and machines required to complete work assignments.

• Interpret and work from block diagrams, schematic diagrams, prints, specifications, technical information, manufacturing records, sketches, and verbal instructions.

• Perform design and fabrication work related to packaging developmental assemblies, including mechanical and assembly fabrication, with engineering assistance.

• Maintain certifications, licenses, and permits necessary for work assignments.

• Prepare reports, maintain records, and ensure accountability of contract tools and test equipment.

• Devise and build temporary tools and work-around methods to facilitate troubleshooting and repair.

• Handle and protect components and assemblies in accordance with shop practices, procedures, and drawing requirements.

• Prioritize work assignments as directed by leads or supervisors and obtain necessary engineering drawings and test documents when not provided.

• Set up and perform bench or automatic tests per work orders, test documents, equipment manuals, and engineering instructions.

• Troubleshoot faults in electronic circuits and hardware, adjusting, repairing, or replacing components as required.

• Select and use appropriate hand, power, and bench tools to perform required operations.

• Maintain test equipment through periodic maintenance and monitor certification dates.

• Troubleshoot and repair computerized test systems.

• Handle and dispose of hazardous materials safely, following Safety Data Sheets (SDS) and using personal protective equipment.

• Pack electronic equipment for travel according to drawings and Boeing specifications.

• Verify work quality after each operation to ensure compliance with drawings and standards.

• Prepare completed or reworked jobs for inspection.

• Communicate with leads, supervisors, engineers, or planners when assistance or clarification is needed, especially regarding drawings, paperwork, or discrepancies.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 120.62 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications :

• Ability to lift, push, and pull up to 35 pounds.

• 3+ years of experience using electronic test equipment.

• 3+ years of hands-on experience with power and control electronics circuit design, product design and manufacturing.

• 3+ years of experience testing and troubleshooting electronics and electrical systems.

Preferred Qualifications:

• UL Certified Electrician.

Conflict of Interest:

Successful candidates for this job must successfully satisfy the Company’s Conflict of Interest (COI) assessment process.

Typical Education & Experience:

• High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

• This position is for a variety of shifts.

Total Rewards & Pay Transparency:  

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $33.32/hour, with potential to earn up to $61.01/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 27, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Tooling and Machined Parts to join our Quality team in Puget Sound in Washington.

As an Inspector for Tooling and Machined Parts, you will be essential in ensuring the highest standards of quality and safety in our manufacturing processes. Your keen attention to detail will enable you to conduct thorough inspections of tooling and machined parts, verifying compliance with stringent specifications and quality standards. To excel in this role, it is important to note that employees must pass visual acuity and color perception eye examination tests to ensure accuracy in evaluations. You will collaborate closely with engineering and quality assurance teams to identify and resolve any discrepancies, ensuring that all components meet operational requirements. Your expertise will also be critical in performing audits and surveillance of manufacturing processes, contributing to continuous improvement initiatives.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Obtain daily work assignments from the team leader or supervisor and review work orders and blueprints to determine required tasks.

• Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells.

• Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required.

• Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives.

• Initiate and document any nonconforming materials or assemblies according to specifications and procedures.

• Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance.

• Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements.

• Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies.

• Inspect mockups of engineering design changes to ensure adherence to specifications.

• Perform line checks to investigate whether rejectable conditions exist on other assemblies or airplanes.

• Indicate Quality Assurance acceptance by stamping the appropriate paperwork and processing completed records.

• Review previously accepted systems, customer requirements, or FAA conformities to determine if re-inspection is required.

• Work with engineering and the FAA on red label equipment to ensure proper segregation from production parts.

• Document discrepancies and report them to the appropriate personnel for resolution.

• Assist in the training and instruction of lower-grade inspectors, providing guidance as needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work on-site at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications :

• 3+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).

• 3+ years of experience in setting and using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators.

• 1+ years of experience calibrating and/or using coordinate measurement machines, laser trackers, and/or optical measurement devices.

• Experience as a Quality Inspector.

• Experience working with Microsoft Office (Excel, Word, PowerPoint).

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Ability to complete Fall Protection Training.

Preferred Qualifications:

• Experience inspecting welds / welds certification

• Equivalent education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.)

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $31.32/hour, with potential to earn up to $59.47/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 27, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Tooling and Machined Parts to join our Quality team in Puget Sound in Washington.

As an Inspector for Tooling and Machined Parts, you will be essential in ensuring the highest standards of quality and safety in our manufacturing processes. Your keen attention to detail will enable you to conduct thorough inspections of tooling and machined parts, verifying compliance with stringent specifications and quality standards. To excel in this role, it is important to note that employees must pass visual acuity and color perception eye examination tests to ensure accuracy in evaluations. You will collaborate closely with engineering and quality assurance teams to identify and resolve any discrepancies, ensuring that all components meet operational requirements. Your expertise will also be critical in performing audits and surveillance of manufacturing processes, contributing to continuous improvement initiatives.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Obtain daily work assignments from the team leader or supervisor and review work orders and blueprints to determine required tasks.

• Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells.

• Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required.

• Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives.

• Initiate and document any nonconforming materials or assemblies according to specifications and procedures.

• Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance.

• Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements.

• Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies.

• Inspect mockups of engineering design changes to ensure adherence to specifications.

• Perform line checks to investigate whether rejectable conditions exist on other assemblies or airplanes.

• Indicate Quality Assurance acceptance by stamping the appropriate paperwork and processing completed records.

• Review previously accepted systems, customer requirements, or FAA conformities to determine if re-inspection is required.

• Work with engineering and the FAA on red label equipment to ensure proper segregation from production parts.

• Document discrepancies and report them to the appropriate personnel for resolution.

• Assist in the training and instruction of lower-grade inspectors, providing guidance as needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work on-site at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications :

• 3+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).

• 3+ years of experience in setting and using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators.

• 1+ years of experience calibrating and/or using coordinate measurement machines, laser trackers, and/or optical measurement devices.

• Experience as a Quality Inspector.

• Experience working with Microsoft Office (Excel, Word, PowerPoint).

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Ability to complete Fall Protection Training.

Preferred Qualifications:

• Experience inspecting welds / welds certification

• Equivalent education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.)

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $31.32/hour, with potential to earn up to $59.47/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 27, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Press Operator, Hydraulic & Mechanical A, to join our Fabrication team in Algona, Auburn, and Everett Washington.

As a Press Operator Hydraulic & Mechanical A, you will be a vital part of our manufacturing team, responsible for setting up and operating hydraulic and mechanical presses to shape and form various materials. Your role will involve obtaining work packages, performing safety checks, and ensuring that all equipment is properly set up and maintained. You will utilize your technical skills to troubleshoot issues, verify material quality, and collaborate with team members to optimize production processes. Your attention to detail and commitment to excellence will directly contribute to our operational success.

You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.

Position Responsibilities:

• Obtain work package from the ready-to-work rack, work board, or assigned by Team Lead, or run previously set-up jobs by reviewing tie-ins from prior operators.

• Operate a computer to access information from prints, sketches, drawings, layout documents, and Boeing (BAC) specifications.

• Perform safety checks on machines, ensuring the area is clear of obstacles, power switches are off, and safety guards are installed.

• Move heavy materials, equipment, tools, and dies to the work area using stackers, Kalamar, die loaders, or overhead cranes, asking for assistance as needed.

• Check steam lines for cracks or cuts and verify o-rings are properly seated prior to hookup.

• Preheat dies and punches using electricity or steam, and verify temperature accuracy for hot dies with a temperature stick or pyrometer.

• Determine machine setup by reviewing work orders, tooling usage instructions, and die setup charts, making adjustments as required.

• Load and secure dies into the press, checking for defects and torquing as necessary.

• Examine tools, dies, and fixtures for damage, separating them using appropriate handling procedures.

• Set up press cycle programs using control panels or manual switches to adjust height, stroke, pressure, and cycle time.

• Develop patterns when necessary, cutting and tailoring materials like fiberglass and graphite to die requirements.

• Perform pull-outs on various types of metal and alloy tubes using a hydraulic tube pull-out machine.

• Verify that materials are free from burrs and debris, using hand deburring tools and denatured alcohol prior to forming operations.

• Consult with Team Lead and other personnel (e.g., engineering, planning, inspection) on process or job-related issues as required.

• Maintain a written tie-in book or electronic communication to coordinate with other shifts and dispose of hazardous materials in an approved manner.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 120.62 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications

• 1+ Years of experience setting and using precision measuring tools; equipment such as micrometers, calipers, and/or dial indicators?

• 1+ Years of experience reading blueprints and structural drawings.

• 1+ Years of experience operating a hydraulic press.

• Must be able to lift, push and pull up to 35 pounds frequently within an 8 hour shift.

Preferred Qualifications:

• Must be able to stand, twist, bend, kneel and occasional crawling within an 8 hour shift.

• Ability to work in noisy environments while completing tasks.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts.

Total Rewards & Pay Transparency

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 31, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Skin & Spar Surface Finish Technician to join our Fabrication team in Auburn, Algona and Puyallup, Washington.

Join our dynamic team as a Skin & Spar Surface Finish Tech, where precision meets innovation in the aerospace industry. In this pivotal role, you will leverage your expertise in interpreting blueprints and engineering specifications to execute meticulous surface finishing and conditioning on critical components such as milled skins and spars. Utilizing advanced templates and jigs, you will ensure optimal positioning for finishing operations, while employing a variety of hand and power tools to achieve exceptional quality standards. Your keen eye for detail will be essential as you diagnose discrepancies, perform thorough inspections, and conduct necessary rework to meet stringent gauge tolerances. Collaborating closely with supervisors and engineering teams, you will navigate complex work orders and utilize online systems to prioritize tasks effectively. Your commitment to safety and compliance will shine through as you handle hazardous materials responsibly and maintain certifications. If you are passionate about delivering excellence in aerospace manufacturing, we invite you to be a part of our mission to shape the future of flight.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Work from blueprints, templates, detail drawings, and verbal instructions to perform surface finish/conditioning on coordination holes in milled skins and spars.

• Use templates and jigs to properly position parts for subsequent finishing operations, including reaming, countersinking, and cold work.

• Scribe tooling locations and reference lines as specified in engineering drawings and specifications.

• Diagnose and correct any detected discrepancies in parts and processes.

• Check finished parts to ensure they meet quality requirements and specifications using precision measuring instruments (e.g., micrometers, trammels, probes).

• Use hand and power tools, including air motors, reamers, and cold-work guns, to perform finishing duties on machined parts.

• Operate ground-controlled handling equipment to load, unload, and move parts within the shop.

• Perform rework as required, including filing, scraping, sanding, grinding, and hand finishing to meet gauge tolerances.

• Locate points and holes from established reference lines or index points using prints, templates, and work orders.

• Perform visual and functional checks on tools and accessories, making necessary adjustments and ensuring they are in good condition.

• Access workload using online computer systems and assign work based on priority or Team Leader direction.

• Review Work Order (W/O) to determine work requirements and ensure prior operations are complete.

• Consult with supervisor/team lead and other sources (e.g., engineering, planning, inspection) to resolve problems.

• Call for inspection or use SI&A as required throughout the process, including checking hole sizes and inspecting countersinks.

• Handle and dispose of hazardous materials in an approved manner while maintaining personal and tool certifications, ensuring compliance with safety standards.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• Basic computer experience and competency.

• Experience using basic math (e.g. addition, subtraction, multiplication and division).

• 1+ years of experience or training in reading and interpreting drawings or blueprints.

• 2+ years of experience using hand tools and/or hand-held power tool

• Able to close tolerance drill within .003 and able to precision measure between .003.

• Able to lift, push and pull up to 35 pounds frequently within an 8 hour shift.

Preferred Qualifications:

• 2+ years of experience providing close tolerance measurements and cuts on close tolerance holes.

• Ability to close tolerance.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts.

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $25.32/hour, with potential to earn up to $54.76/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 23, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Tool & Die Maker to join our Materials Management & Tooling team in Auburn and Renton, Washington.

In this hands-on position, you will be responsible for a variety of tasks, from interpreting blueprints and work orders to developing effective plans for tool fabrication and repair. Your skills will be essential in troubleshooting production challenges, operating advanced machinery, and ensuring that all tools meet stringent quality standards. Collaborating with cross-functional teams, you will also engage with customers and suppliers to address any functional issues, all while adhering to safety protocols and continuous improvement practices. If you are passionate about precision engineering and ready to make a significant impact in a fast-paced environment, we invite you to explore this exciting opportunity.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Perform all functions related to tool fabrication, rework, and repair as required.

• Obtain work orders from the team leader or supervisor, determining assignments based on schedule dates and tool availability.

• Read work orders and blueprints to identify required tasks, tools, and equipment.

• Develop plans for the fabrication, maintenance, and repair of tools.

• Initiate and coordinate engineering change requests with internal support groups when necessary.

• Determine the sequence of tool fabrication work, troubleshoot issues, and develop solutions to production challenges.

• Access and utilize appropriate tool drawings, models, and specifications using available computing systems.

• Select and verify necessary equipment from the shop storage area, ensuring current tool certification.

• Perform repairs or replacements on tools as per Standing Tool Order (STO) Production Requests, and request rework orders if necessary.

• Layout holes, lines, and other tool features, and install or modify hydraulic, pneumatic, and vacuum tubes as required.

• Operate various machinery, including power saws, drill presses, and CNC machines, to shape materials and prepare details.

• Move materials and equipment using Powered Industrial Trucks (PIT) and overhead cranes as needed.

• Maintain accurate records of orders and coordinate tooling information with other shifts and departments.

• Handle hazardous materials in compliance with Boeing procedures, using appropriate personal protective equipment.

• Engage in continuous improvement practices to enhance quality, safety, and efficiency in tool and die work.

• Use precision measuring instruments, such as micrometers and gauges, to ensure accuracy in fabrication and repairs.

• Interface with customers and suppliers to incorporate changes or resolve functional and installation issues.

• Submit completed jobs to Quality Assurance and assist inspectors in performing necessary checks or measurements.

• Utilize mathematics, including algebra and trigonometry, to calculate dimensions and analyze Model Based Definition (MBD) for fabrication details.

• Conduct tool tryouts and make necessary adjustments to ensure production meets quality requirements and specifications.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications:

• 5+ years of experience in repairing, maintaining, construction, and/or the inspection of tools, dies, jigs, powerfeed, etc.

• 5+ years of experience in machine shop processes, geometric dimensioning & tolerances, and machining capabilities of different types of materials.

• 2+ years of experience using complete set of toolmaker shop equipment (milling, lathe, precision, grinding, polishing, and fitting).

Preferred Qualifications:

• 5+ years of experience as a Tool & Die Maker.

• 2+ years of experience with hydraulics and pneumatics.

• Completed an approved Mold Maker or Tool and Die Maker state apprentice ship program and/or certified by the U.S.

• Ability to perform machining operations with a specified degree of accuracy and within a timely manner, maintain close and exacting tolerances and finish requirements ensuring highest quality workmanship on all tools, gages, and fixtures with minimal scrap.

• Capable of creating a repeatable setup and working to tolerances of +/-.0002" in controlled environment.

• Possesses 4 and 5 axis CNC skills for mill or lathe, and extensive knowledge of detail cutting tool geometry for different cutting tool types and materials.

• Ability to reverse engineer and manufacture mold components within time limitations

• Ability to read and write G and M code with CAM programming experience.

Conflict of Interest:

Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• This position offers relocation based on candidate eligibility.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $40.00/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Jul. 31, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.