Engineering Structures Impact Factor Jobs in Brownsville Tx Remote
780 positions found
Do you want to become a surrogate? We are now offering a sign on bonus to all qualified and matched surrogates that sign contracts. The first step is to fill out our surrogate application. A fertility specialist will contact you to continue the process. For intended parents interested in surrogacy to start or grow their families please contact us today. The surrogacy process is complex, but we will be with you every step of the way. Call today to get started.
Women who may have the ability to produce eggs but are unable to use their uterus or do not have a uterus, may consider a surrogate. A donated egg may also be used with the surrogate in the event a woman cannot produce her own eggs or her uterus is not intact or insufficient to carry a pregnancy. In either case, the husband's sperm, if viable, may be used.
Using an egg donor unrelated to the surrogate carrier eliminates any biological tie. The egg of the surrogate is never used as part of the assisted reproduction process, so that a surrogate is never in the position of delivering her own biological child.
The basic requirements of a woman to serve as a surrogate are:
- Emotionally stable
- Responsible
- In good physical health
- Non-smoker
- Has had at least one successful pregnancy
- Is capable of carrying a child to full term
A woman is not required to fall within a particular age range to serve as a surrogate, but most intended parents prefer a surrogate under the age of 40. For more information on surrogacy please see the documents on the left side of this page.
In Texas, there is a judicial process for validating the Gestational Contract (the contract between the intended parents and the surrogate). Included within the various requirements for having a Gestational Contract validated by a Texas court is that the intended parents must be married and the surrogate must have previously carried a child to term. Additionally, there are residency requirements that apply to either the surrogate or the intended parents, but not both.
Compensation for a surrogate services generally starts in the range of $35,000 - $40,000, for base compensation with over all fees up to 70k, in many cases. The amount of compensation is dependent upon a variety of factors, including, but not limited to, whether the surrogate carries twins, what procedures a surrogate is required to undergo and whether the delivery is vaginally or by cesarean section.
Turn your shopping skills into extra income. Whether you’re helping someone stock up on groceries or delivering a last-minute convenience order, as a Shopper you unlock more earnings opportunities with DoorDash. Stay active during off-peak hours and no need to wait around for a restaurant preparing an order, becoming a Shopper with DoorDash puts you in control of your time and earnings.
Either as a side hustle or a full-time gig, being a Shopper with DoorDash gives you the opportunity to earn extra cash on your terms.
Multiple ways to earn: Deliver more than just restaurant orders. Become a Shopper and deliver grocery, convenience, retail, alcohol and more—DoorDash offers diverse earning opportunities so you can maximize your time.
Control your time: Make cash during off-peak hours so you don’t have to schedule your day around the lunch or dinner time rush; don’t wait around for an order when you do the shopping.
Know how much you'll make: Clear and concise pay model lets you know the minimum amount you will make before accepting any offer.
Earn more: Get more cash per delivery on average compared to a restaurant delivery when you do the shopping.*
Quick and easy start: Sign up in minutes and get on the road fast.*
Basic Requirements
18+ years old** (21+ to deliver alcohol)
Any car, scooter, or bicycle (in select cities)
Driver's license number
Social security number (only in the US)
Consistent access to a smartphone
How to Become a Shopper
Click “Sign UpApply Now” and complete the sign up process
Download the DoorDash Dasher app
Activate your Red Card in the Dasher app***
*Compared to a restaurant delivery order, based on average Dasher payouts nationwide while on a delivery. Actual earnings may differ and depend on factors like number of deliveries completed, time of day, location, and expenses.
*Subject to eligibility.
**Must be 19+ in Arizona, California, Colorado, Delaware, Florida, Georgia, Idaho, Kentucky, Montana, New Jersey, New Mexico, Texas, Utah, and West Virginia
***The Red Card is a prepaid card used by Dashers to pay for items on Dasher Shop & Deliver offers. The card will automatically be funded prior to check out. Red Cards are not linked to Dasher bank accounts or related to earnings.
This card is issued by Peoples Trust Company under license from Mastercard International Incorporated. Mastercard is a registered trademark, and the circles design is a trademark of Mastercard International Incorporated.
Additional information
Dashing with DoorDash is a great earnings opportunity for anyone looking for part-time, seasonal, flexible, weekend, after-school, temporary, steady delivery gig. Deliver with DoorDash and earn extra cash while being your own boss. Dash when it works for you. Sign up today.
Remote working/work at home options are available for this role.
Do you currently have an opportunity to make a real impact with your work? With over 2,000 sites of care and serving over 31.2 million patient interactions every year, nurses at Valley Regional Medical Center have the opportunity to make a real impact. As a(an) Registered Nurse RN Emergency Department ER you can be a part of change.
BenefitsValley Regional Medical Center, offers a total rewards package that supports the health, life, career and retirement of our colleagues. The available plans and programs include:
- Comprehensive medical coverage that covers many common services at no cost or for a low copay. Plans include prescription drug and behavioral health coverage as well as free telemedicine services and free AirMed medical transportation.
- Additional options for dental and vision benefits, life and disability coverage, flexible spending accounts, supplemental health protection plans (accident, critical illness, hospital indemnity), auto and home insurance, identity theft protection, legal counseling, long-term care coverage, moving assistance, pet insurance and more.
- Free counseling services and resources for emotional, physical and financial wellbeing
- 401(k) Plan with a 100% match on 3% to 9% of pay (based on years of service)
- Employee Stock Purchase Plan with 10% off HCA Healthcare stock
- Family support through fertility and family building benefits with Progyny and adoption assistance.
- Referral services for child, elder and pet care, home and auto repair, event planning and more
- Consumer discounts through Abenity and Consumer Discounts
- Retirement readiness, rollover assistance services and preferred banking partnerships
- Education assistance (tuition, student loan, certification support, dependent scholarships)
- Colleague recognition program
- Time Away From Work Program (paid time off, paid family leave, long- and short-term disability coverage and leaves of absence)
- Employee Health Assistance Fund that offers free employee-only coverage to full-time and part-time colleagues based on income.
Learn more about Employee Benefits
Note: Eligibility for benefits may vary by location.
It is an exciting time to be a nurse at HCA Healthcare! Come unlock your career potential and see how rewarding it can be to reach your personal and professional goals. Help to advance the practice of nursing and improve positive outcomes for your patients as a (an) Registered Nurse RN Emergency Department ER. We want your knowledge and expertise!
Job Summary and QualificationsThe Registered Nurse coordinates and delivers high quality, patient-centered care in accordance with the nature and specific requirements of the department, and consistent with the scope and standards of practice for the relevant state and specialty. In collaboration with medical providers and other members of the care team, the RN provides individualized, comprehensive, and compassionate care using established nursing models such as “Assess, Perform, Teach, and Manage.” The RN serves as an advocate for patients/families/caregivers and models a commitment to the organization’s vision/mission/values to support an unparalleled patient experience and clinical outcomes that contribute to overall departmental performance.
- Assesses patient pain regularly to promote effective pain management, including reassessments after appropriate intervention.
- Performs procedures, monitoring, or other functions as ordered by the medical provider(s). Documents the administration of care in the patient medical record in a timely and thorough manner.
- Performs exceptional care by responding promptly to patient requests. Strives to anticipate patient needs and resolve them proactively.
- Teaches patients/families/caregivers about patient medical condition, patient status, treatment plan, medications and possible side effects, and follow-up measures. Translates complex medical terminology to ensure complete understanding.
- Teaches patients/families/caregivers about any non-medicinal follow-up measures, such as healthy diet and exercise, disease prevention, and/or other lifestyle changes. Prepares patients and families/caregivers for future self-management.
- Advanced Cardiac Life Support must be obtained within 90 days of employment start date
- Basic Cardiac Life Support
- Emergency Nurse Pediatric Course must be obtained within 1 year of employment start date
- PALS Pediatric Adv Life Supt must be obtained within 90 days of employment start date
- Trauma Nursing Core Course must be obtained within 1 year of employment start date
- (RN) Registered Nurse
- Associate Degree, or Bachelors Degree, or Registered Nurse Diploma
- 1 year RN experience in an acute care setting
Founded as Valley Community Hospital in 1975, Valley Regional Medical Center proudly serves Brownsville, TX and the surrounding communities in the Rio Grande Valley. Valley Regional Medical Center is a licensed 215+ bed facility with over 200 physicians representing 25+ specialties. From emergency medicine, to diagnostic imaging services, and caring for newborn babies, Valley Regional Medical Center is the hospital that families count on when they are looking for quality healthcare close to home. We are a designated Advanced Level III Trauma Center and an Advanced Primary Stroke Center. Our Heart and Vascular services include a full-range of cardiac services including minimally invasive and open-heart surgery, cardiac cath lab, heart imaging services and more. Our women’s department includes labor, delivery and recovery in a home-like setting. We also have a C-section operating room on standby 24 hours a day and a Level III Neonatal Intensive Care Unit equipped with specially trained staff. Innovation and an unwavering commitment to patient care are the cornerstones of our hospital. Come experience our family centered culture at Valley Regional.
HCA Healthcare has been recognized as one of the World’s Most Ethical Companies® by the Ethisphere Institute more than ten times. In recent years, HCA Healthcare spent an estimated $3.7 billion in cost for the delivery of charitable care, uninsured discounts, and other uncompensated expenses.
"There is so much good to do in the world and so many different ways to do it."- Dr. Thomas Frist, Sr.
HCA Healthcare Co-Founder
Be a part of an organization that leverages our size to make a real impact in our industry! Our Talent Acquisition team is reviewing applications for our Registered Nurse RN Emergency Department ER opening. Submit your application today and help advance the practice of nursing.
We are an equal opportunity employer. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.
Do you currently have an opportunity to make a real impact with your work? With over 2,000 sites of care and serving over 31.2 million patient interactions every year, nurses at Valley Regional Medical Center have the opportunity to make a real impact. As a(an) Registered Nurse RN Case Manager you can be a part of change.
BenefitsValley Regional Medical Center, offers a total rewards package that supports the health, life, career and retirement of our colleagues. The available plans and programs include:
- Comprehensive medical coverage that covers many common services at no cost or for a low copay. Plans include prescription drug and behavioral health coverage as well as free telemedicine services and free AirMed medical transportation.
- Additional options for dental and vision benefits, life and disability coverage, flexible spending accounts, supplemental health protection plans (accident, critical illness, hospital indemnity), auto and home insurance, identity theft protection, legal counseling, long-term care coverage, moving assistance, pet insurance and more.
- Free counseling services and resources for emotional, physical and financial wellbeing
- 401(k) Plan with a 100% match on 3% to 9% of pay (based on years of service)
- Employee Stock Purchase Plan with 10% off HCA Healthcare stock
- Family support through fertility and family building benefits with Progyny and adoption assistance.
- Referral services for child, elder and pet care, home and auto repair, event planning and more
- Consumer discounts through Abenity and Consumer Discounts
- Retirement readiness, rollover assistance services and preferred banking partnerships
- Education assistance (tuition, student loan, certification support, dependent scholarships)
- Colleague recognition program
- Time Away From Work Program (paid time off, paid family leave, long- and short-term disability coverage and leaves of absence)
- Employee Health Assistance Fund that offers free employee-only coverage to full-time and part-time colleagues based on income.
Learn more about Employee Benefits
Note: Eligibility for benefits may vary by location.
It is an exciting time to be a nurse at HCA Healthcare! Come unlock your career potential and see how rewarding it can be to reach your personal and professional goals. Help to advance the practice of nursing and improve positive outcomes for your patients as a (an) Registered Nurse RN Case Manager. We want your knowledge and expertise!
Job Summary and QualificationsWe are seeking a RN Case Managerfor our facility to ensure that we continue to provide all patients with high quality, efficient care. We are an amazing team that works hard to support each other, and we are seeking a phenomenal addition like you who feels patient care is as meaningful as we do. We want you to apply now!
What You Will Do In Your Role:
- You will be responsible for promoting patient-centered care by coordinating all aspects of hospital-based case management for his/her assigned area of responsibility in alignment with the goals of the Case Management Department
- You will be accountable for the overall day-to-day oversight and management of the case management program including coordination, supervision, and administrative oversight of the case management team
- You will function as an expert clinical practitioner, case management subject-matter expert, resource, advisor and leader for the members of the case management team
- You will supervise and monitor professional and support staff and ensures that effective care coordination and case management practices are consistent with hospital policies, and applicable regulations and guidelines
- You will coordinate activities that promote quality outcomes and patient throughput while supporting a balance of optimal care and appropriate resource utilization
- Basic Cardiac Life Support must be obtained within 30 days of employment start date
- (RN) Registered Nurse
- Masters Degree, or Bachelors Degree, or Associate Degree
- 3+ years of RN experience in an acute care setting
- Case Management experience preferred
Founded as Valley Community Hospital in 1975, Valley Regional Medical Center proudly serves Brownsville, TX and the surrounding communities in the Rio Grande Valley. Valley Regional Medical Center is a licensed 215+ bed facility with over 200 physicians representing 25+ specialties. From emergency medicine, to diagnostic imaging services, and caring for newborn babies, Valley Regional Medical Center is the hospital that families count on when they are looking for quality healthcare close to home. We are a designated Advanced Level III Trauma Center and an Advanced Primary Stroke Center. Our Heart and Vascular services include a full-range of cardiac services including minimally invasive and open-heart surgery, cardiac cath lab, heart imaging services and more. Our women’s department includes labor, delivery and recovery in a home-like setting. We also have a C-section operating room on standby 24 hours a day and a Level III Neonatal Intensive Care Unit equipped with specially trained staff. Innovation and an unwavering commitment to patient care are the cornerstones of our hospital. Come experience our family centered culture at Valley Regional.
HCA Healthcare has been recognized as one of the World’s Most Ethical Companies® by the Ethisphere Institute more than ten times. In recent years, HCA Healthcare spent an estimated $3.7 billion in cost for the delivery of charitable care, uninsured discounts, and other uncompensated expenses.
"There is so much good to do in the world and so many different ways to do it."- Dr. Thomas Frist, Sr.
HCA Healthcare Co-Founder
Be a part of an organization that leverages our size to make a real impact in our industry! Our Talent Acquisition team is reviewing applications for our Registered Nurse RN Case Manager opening. Submit your application today and help advance the practice of nursing.
We are an equal opportunity employer. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.
Do you currently have an opportunity to make a real impact with your work? With over 2,000 sites of care and serving over 31.2 million patient interactions every year, nurses at Valley Regional Medical Center have the opportunity to make a real impact. As a Registered Nurse Acute Care Telemetry you can be a part of change.
BenefitsValley Regional Medical Center, offers a total rewards package that supports the health, life, career and retirement of our colleagues. The available plans and programs include:
- Comprehensive medical coverage that covers many common services at no cost or for a low copay. Plans include prescription drug and behavioral health coverage as well as free telemedicine services and free AirMed medical transportation.
- Additional options for dental and vision benefits, life and disability coverage, flexible spending accounts, supplemental health protection plans (accident, critical illness, hospital indemnity), auto and home insurance, identity theft protection, legal counseling, long-term care coverage, moving assistance, pet insurance and more.
- Free counseling services and resources for emotional, physical and financial wellbeing
- 401(k) Plan with a 100% match on 3% to 9% of pay (based on years of service)
- Employee Stock Purchase Plan with 10% off HCA Healthcare stock
- Family support through fertility and family building benefits with Progyny and adoption assistance.
- Referral services for child, elder and pet care, home and auto repair, event planning and more
- Consumer discounts through Abenity and Consumer Discounts
- Retirement readiness, rollover assistance services and preferred banking partnerships
- Education assistance (tuition, student loan, certification support, dependent scholarships)
- Colleague recognition program
- Time Away From Work Program (paid time off, paid family leave, long- and short-term disability coverage and leaves of absence)
- Employee Health Assistance Fund that offers free employee-only coverage to full-time and part-time colleagues based on income.
Learn more about Employee Benefits
Note: Eligibility for benefits may vary by location.
It is an exciting time to be a nurse at HCA Healthcare! Come unlock your career potential and see how rewarding it can be to reach your personal and professional goals. Help to advance the practice of nursing and improve positive outcomes for your patients as a (an) Registered Nurse Acute Care Telemetry. We want your knowledge and expertise!
Job Summary and QualificationsAs a Registered Nurse, you will be responsible for delivering high-quality, patient-centered care in line with the requirements of the department and the standards of practice for the relevant state and specialty. Collaborating with medical providers and the care team, you will provide personalized, comprehensive, and compassionate care, following established nursing models such as "Assess, Perform, Teach, and Manage." You will also act as an advocate for patients, families, and caregivers, embodying the organization's vision, mission, and values to ensure an outstanding patient experience and positive clinical outcomes.
What you will do in this role:
- Assists with admission and discharge processes to ensure efficient throughput and high quality, patient-centered care.
- Participates in the ongoing assessment of the quality of patient care services provided in the unit, in collaboration with other members of the management team.
- Collaborates with subject matter experts and other managers to create an environment of teamwork that supports improved outcomes and service.
- Supports a patient-first philosophy and engages in service recovery when necessary.
- Supports the efforts of the facility to improve engagement by operationalizing current nursing strategies, including employee rounding, hourly rounds, and other initiatives.
- Provides recommendations related to interviewing, selecting, and training new staff. Recommends and implements courses of action, including training and development, conflict resolution, personnel policy compliance, completion of performance evaluations, and/or disciplinary actions to ensure a competitively better organization.
- Assists with staff scheduling. Manages all practical aspects of staff labor in accordance with patient care needs and established productivity guidelines.
- Supports proper inventory control and assists with managing supplies and equipment.
What qualifications you will need:
- Graduate of an Accredited School of Nursing
- Current TX RN licensure
- BCLS required
Founded as Valley Community Hospital in 1975, Valley Regional Medical Center proudly serves Brownsville, TX and the surrounding communities in the Rio Grande Valley. Valley Regional Medical Center is a licensed 215+ bed facility with over 200 physicians representing 25+ specialties. From emergency medicine, to diagnostic imaging services, and caring for newborn babies, Valley Regional Medical Center is the hospital that families count on when they are looking for quality healthcare close to home. We are a designated Advanced Level III Trauma Center and an Advanced Primary Stroke Center. Our Heart and Vascular services include a full-range of cardiac services including minimally invasive and open-heart surgery, cardiac cath lab, heart imaging services and more. Our women’s department includes labor, delivery and recovery in a home-like setting. We also have a C-section operating room on standby 24 hours a day and a Level III Neonatal Intensive Care Unit equipped with specially trained staff. Innovation and an unwavering commitment to patient care are the cornerstones of our hospital. Come experience our family centered culture at Valley Regional.
HCA Healthcare has been recognized as one of the World’s Most Ethical Companies® by the Ethisphere Institute more than ten times. In recent years, HCA Healthcare spent an estimated $3.7 billion in cost for the delivery of charitable care, uninsured discounts, and other uncompensated expenses.
"There is so much good to do in the world and so many different ways to do it."- Dr. Thomas Frist, Sr.
HCA Healthcare Co-Founder
Be a part of an organization that leverages our size to make a real impact in our industry! Our Talent Acquisition team is reviewing applications for our Registered Nurse Acute Care Telemetry opening. Submit your application today and help advance the practice of nursing.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.