Engineering Jobs in Vero Beach Fl Flexible
201 positions found
Responsibilities include leading a team of I&T engineers through the product life cycle, from initial requirement analysis for testability to designing and developing test plans and flows.
Additionally, this role involves defining, planning, and implementing strategies for test, verification, validation, qualification, and acceptance testing.
Provide mastery-level system integration and test engineering expertise to a team.
Lead space hardware and software integration and verification testing at acceptance, proto-flight, and qualification levels for all relevant environments (vibration, thermal, vacuum) Develop verification plans, test procedures, and test flows, and lead the execution of test procedures.
Document test results in reports to ensure system requirements are met.
managing the Test Bed and Simulators used during integration and test activities.
Identify and resolve technical issues and anomalies during integration and testing, collaborating with cross-functional teams to address discrepancies.
Collaborate with cross-discipline teams (systems, mechanical, structural, thermal, power, optical, RF, electrical) in development, integration, and execution.
Represent Space Integration & Test engineering during major system level design reviews including System Requirements Review (SRR), Preliminary Design Reviews (PDR), Critical Design Reviews (CDR), and Test Readiness Reviews (TRR), and Pre-Shipment Review (PSR) Qualifications: Bachelor’s Degree and a minimum of 12 years of engineering experience.
Graduate Degree and a minimum of 10 years of engineering experience.
In lieu of a degree, a minimum of 16 years of engineering experience Experience with system-level space requirements verification, including allocation, testability, flow down, analysis, testing, and demonstration.
Experience with space hardware/software integration, testing, and troubleshooting Experience with Flat Sats and simulators Secret Clearance Preferred Additional Skills: Technical leadership experience in an SI&T role Experience designing Mechanical Ground Support Equipment (MGSE) and/or Electrical Ground Support Equipment (EGSE) for large space vehicles.
Power, Thermal, Communications (Optical or RF), Data Management, Structures, Mechanisms, GNC, Propulsion, Configuration/Packaging, Software, Fault Management, Harness Proficiency with Interface Definition Documents (IDDs) and Interface Control Drawings (ICDs) Expertise in requirements management, traceability, and verification using IBM Rational DOORS and MBSE tools (CAMEO) Experience directly interfacing with customers (both prime contractors and end customers) to resolve technical issues during the development and sell-off of space hardware.
Experience in risk management LI-KB1 LI-KB1 L3Harris Technologies is proud to be an Equal Opportunity Employer.
All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws.
L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.
Please be aware many of our positions require the ability to obtain a security clearance.
Security clearances may only be granted to U.S.
citizens.
By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.
Please click here for the E-Verify Poster in English or Spanish .
For information regarding your Right To Work, please click here for English or Spanish .
The PLM Integration and Test Lead designs, develops the overall integration and testing scheme/approach for the new PLM development and then manages the overall integration and testing activates of the PLM team to ensure PLM capabilities function as an element and within the integrated L3Harris system with high quality and reliability for sustained business success.
Essential Functions: Leads the design and development of the Integration and test plan with the PLM Leads Develops and manages overall Test and Integration Plan and leads implementation and tracking of the plan for the PLM DT Drives a Design for Test and Integration mindset in the overall PLM Team Ensures each capability is functionally validated and performance achieved in the integrated system for successful business execution Leads team in the development of efficient and robust test methodologies Organizes use cases and scenarios to test Grades and ranks test and integration activities to enable prioritization based on risk, criticality, etc Leads teams in conducting independent Failure Modes Effects Analysis of IT Vendor designs to identify high risk, high probability modes of failure, prioritize importance and mitigation activities Leads interface between L3Harris functional I&T team execution and IT/contractor developing and setting reporting workflow and expectations for individual capability working groups Manages the troubleshooting interface with IT and vendors Track and monitors and reports functional progress of test and integration Manages, tracks and reports functional integration and test activities status Organizes program and business specific I&T activities Qualifications: Bachelor’s Degree (in Engineering, Computer Science, or related technical field) and minimum 9 years of prior relevant experience.
Graduate Degree and a minimum of 7 years of prior related experience.
In lieu of a degree, minimum of 13 years of prior related experience Experience in large-scale PLM implementation, development, test or migration projects.
Experience with mechanical and electrical engineering design processes, configuration management principles, and product data management.
Experience with a major PLM platform and its integration with major MCAD and ECAD tools.
Preferred Additional Skills: Familiarity with the specific challenges and requirements of the Aerospace & Defense (A&D) industry TS/SCI Clearance LI-KB1 L3Harris Technologies is proud to be an Equal Opportunity Employer.
L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination.
All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws.
L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.
Please be aware many of our positions require the ability to obtain a security clearance.
Security clearances may only be granted to U.S.
citizens.
In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.
By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.
L3Harris Technologies is an E-Verify Employer.
Please click here for the E-Verify Poster in English or Spanish .
For information regarding your Right To Work, please click here for English or Spanish .
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do.
Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth.
L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success.
Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do.
L3Harris is the Trusted Disruptor in defense tech.
With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
L3Harris Engineering & Program Finance Hiring Event for Cleared Talent in Melbourne, Florida.
Overview: Join our team that's not merely aiming for the stars — we're actively sculpting the future of space, cyber, air, and sea technology! Our expanding teams in Software Engineering, Systems Engineering, Integration and Test, Network Planning, and Program Finance are dedicated to influencing the trajectory of these critical domains.
We engage with every product and service provided, fostering a vibrant and welcoming atmosphere that harnesses problem-solving skills, creativity, and data analytics to confront the industry's most thrilling challenges, all while contributing to the security of our nation.
Date: Wednesday, April 1st Time: 2:00
- 5:30pm Location: Will be provided in invite Please note, this event is not for recent or new college graduates.
Opportunities at L3Harris: Software Engineers Systems Engineers Space Vehicle Engineers Systems, Integration and Test RF Engineers Network Planning Engineers Program Finance Contracts Trade Compliance Qualifications: Minimum of a Bachelor’s degree 3 years experience in your field OR an additional 4 years in lieu of a degree (we have senior level roles as well that require 12 years experienced with a Bachelor’s degree) An active DoD Security Clearance or ability to obtain one which requires US Citizenship and a detailed background investigation Relevant experience within aerospace, defense, or technology industries.
Benefits of Joining L3Harris: Innovative Projects: Contribute to pioneering advancements in space systems technology.
Global Impact: Work on projects with far-reaching global influence.
Professional Development: Thrive in a collaborative workplace that promotes career advancement.
Compensation & Flexibility: Receive robust compensation, flexible work arrangements, and a full spectrum of benefits.
Dedication to Excellence: Join a team dedicated to innovation where your work contributes to the greater good in defense, aerospace, and beyond.
9/80 work schedule: Every other Friday off! Click 'APPLY NOW' to register for this event.
Should we have opportunities that align with your background we’ll send you an invite with details about the event.
L3Harris Technologies is proud to be an Equal Opportunity Employer.
L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination.
All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws.
L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.
Please be aware many of our positions require the ability to obtain a security clearance.
Security clearances may only be granted to U.S.
citizens.
In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.
By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.
L3Harris Technologies is an E-Verify Employer.
Please click here for the E-Verify Poster in English or Spanish .
For information regarding your Right To Work, please click here for English or Spanish .
The Advanced Concept Engineer (ACE) provides strategic technical leadership to draw on L3Harris' technical competencies to meet the business needs of L3Harris and its customers.
The ACE is the technical interface between L3Harris and our customers’ engineering staff, supporting the Business Development staff in the creation of new business opportunities.
The successful ACE will engage with customer, engineering, operations, and management personnel to define and document the customer’s CONOPS and requirements, perform trade studies, engage L3Harris Subject Matter Experts (SMEs) to architect an affordable solution carrying acceptable risk, and lead resulting proposal efforts.
The ACE considers all of the needs, resources, and constraints, including the customer mission, budget limitations, technical preferences, physics boundaries, and the political climate, in a manner that creates trust in the ACE as well as L3Harris.
During program execution, the ACE is the technical advocate and voice of the customer during program reviews.
This role requires experience in systems engineering, system architecture development, competitive assessment, project engineering management and development program execution.
The Advanced Concept Engineer should be a subject matter expert in multiple technical domains with an entrepreneurial background.
This individual will work closely with business development and senior management to respond to customer needs with technical presentations, white papers and proposals; requests for proposals, information and broad agency announcements; and provide market and subject matter expert guidance to business strategy and existing development efforts.
Demonstrated communication and interpersonal skills, coupled with the ability to work cross-functionally between a large engineering enterprise and external partners is required.
Essential Functions: Interpretation of customers’ mission needs with a focus on identifying mission gaps and addressable market Advocates customer critical needs to internal stakeholders Builds business cases and manages discretionary resources Roadmaps organic technology, discretionary funding, external partner capabilities, and customer funded studies to build new business opportunities Performs technical and management competitive assessments to clearly communicate why and how the new business opportunities provide value to L3Harris and the customer Evaluates customer and operational needs to help define and coordinate high level system performance, physical, functional, and program interface requirements Synthesis and life cycle ownership of mission architecture Generation of the initial Concept of Operations (CONOPS) or Operational Descriptions Document (ODD) Generation of initial system architecture views; decomposing opportunity to addressable configuration items in a compressive value chain framework Leads the development of appropriate solutions to customer needs Demonstrates broad and deep technical knowledge; accesses Subject Matter Experts (SMEs) as needed Determines whether requirements can be met with existing capabilities/designs or if new design requirements must be developed Leads and coordinates various analyses to optimize total system of systems and/or system architecture Assess and provide direction for make/buy decisions and selection of strategic suppliers Establishes the technology integration or migration strategies Leads and perform trade studies required to make both tactical and strategic technical decisions for pursuit Provides technical coordination between customer, industry, and internal engineering groups to articulate technical issues Prepares and presents technical information that addresses specific subjects of interest Analyzes and develops recommendations to resolve contractual technical issues Maintains a macro view of L3Harris' existing and emerging technologies Leads and coordinates pursuit activities such as technical baseline reviews, request for input (RFI) responses, request for proposal (RFP) responses, and white papers.
Qualifications: Bachelor’s Degree with a minimum of 15 years of prior related experience.
Graduate Degree with a minimum of 13 years of prior related experience.
In lieu of a degree, minimum of 19 years of prior related experience.
Demonstrated experience working with EW systems, including signals analysis, hardware design approaches, industry best practices, and techniques against adversary systems.
Previous experience executing DoD/government programs Proven technical business development skills Excellent written and verbal communication skills Excels in communication, adeptly translating complex technical concepts for diverse audiences, including non-technical stakeholders and cross-functional teams Experience with functional and physical architecture development Experience collaborating in a team environment Ability to work autonomously and with others to resolve technical issues Active Top Secret Security Clearance.
Preferred Additional Skills: Current US Government Top Secret//SCI Security Clearance Deep expertise in RF Engineering including Ideation, analysis of alternatives, and link budgets Knowledge of the requirements and challenges associated with developing counter communications solutions for man-pack systems.
Experience with AI tools and frameworks for developing intelligent systems and automating processes Offensive and defensive Cyber mission experience with the ability to identify core mission gaps and influence customer solution space Demonstrated entrepreneurial success Demonstrated quick reaction technical team leadership experience Previous experience with SOCOM Broad experience working with and for Department of Defense (DoD), Intelligence Community (IC) — both domestic and international L3Harris Technologies is proud to be an Equal Opportunity Employer.
L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination.
All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws.
L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.
Please be aware many of our positions require the ability to obtain a security clearance.
Security clearances may only be granted to U.S.
citizens.
In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.
By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.
L3Harris Technologies is an E-Verify Employer.
Please click here for the E-Verify Poster in English or Spanish .
For information regarding your Right To Work, please click here for English or Spanish .
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do.
Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth.
L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success.
Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do.
L3Harris is the Trusted Disruptor in defense tech.
With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
L3Harris Engineering & Program Finance Hiring Event for Cleared Talent in Melbourne, Florida.
Overview: Join our team that's not merely aiming for the stars — we're actively sculpting the future of space, cyber, air, and sea technology! Our expanding teams in Software Engineering, Systems Engineering, Integration and Test, Network Planning, and Program Finance are dedicated to influencing the trajectory of these critical domains.
We engage with every product and service provided, fostering a vibrant and welcoming atmosphere that harnesses problem-solving skills, creativity, and data analytics to confront the industry's most thrilling challenges, all while contributing to the security of our nation.
Date: Wednesday, April 1st Time: 2:00
- 5:30pm Location: Will be provided in invite Please note, this event is not for recent or new college graduates.
Opportunities at L3Harris: Software Engineers Systems Engineers Space Vehicle Engineers Systems, Integration and Test RF Engineers Network Planning Engineers Program Finance Contracts Trade Compliance Qualifications: Minimum of a Bachelor’s degree 3 years experience in your field OR an additional 4 years in lieu of a degree (we have senior level roles as well that require 12 years experienced with a Bachelor’s degree) An active DoD Security Clearance or ability to obtain one which requires US Citizenship and a detailed background investigation Relevant experience within aerospace, defense, or technology industries.
Benefits of Joining L3Harris: Innovative Projects: Contribute to pioneering advancements in space systems technology.
Global Impact: Work on projects with far-reaching global influence.
Professional Development: Thrive in a collaborative workplace that promotes career advancement.
Compensation & Flexibility: Receive robust compensation, flexible work arrangements, and a full spectrum of benefits.
Dedication to Excellence: Join a team dedicated to innovation where your work contributes to the greater good in defense, aerospace, and beyond.
9/80 work schedule: Every other Friday off! Click 'APPLY NOW' to register for this event.
Should we have opportunities that align with your background we’ll send you an invite with details about the event.
L3Harris Technologies is proud to be an Equal Opportunity Employer.
L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination.
All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws.
L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.
Please be aware many of our positions require the ability to obtain a security clearance.
Security clearances may only be granted to U.S.
citizens.
In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.
By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.
L3Harris Technologies is an E-Verify Employer.
Please click here for the E-Verify Poster in English or Spanish .
For information regarding your Right To Work, please click here for English or Spanish .
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Amit, at 224 507 1290 Title: IT Solution Architect (Financial Systems)
- Remote Location: Remote (Candidates local to Corning, NY and Charlotte, NC are preferred.
Open to candidates in other locations; candidates must be willing to work EST time zone) Duration: 12 Months with possibility of extension based on demand.
Schedule: Full-time, M-F, 8 AM
- 5 PM.
Some potential flexibility may be required for after-hours work, as needed.
Travel
- up to 25% for travel to Corning, NY.
Estimated as one week per month based on project need.
Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered Position Summary The IT Solution Architect for Supply Chain and Finance is responsible for designing, developing, and guiding the implementation of enterprise technology solutions that support client's financial and supply chain processes.
This role collaborates closely with business stakeholders and cross-functional IT teams to ensure systems are scalable, secure, and aligned with organizational strategy.
The architect enables operational excellence by shaping solution roadmaps, ensuring platform integrity, and driving continuous improvement across finance and supply chain applications.
Key Responsibilities Solution Architecture and Design Develop end-to-end architectural designs for finance and supply chain systems in alignment with business objectives.
Assess existing application landscapes and recommend improvements, modernization opportunities, and integration strategies.
Ensure solutions comply with security, data governance, and enterprise architecture standards.
Business Partnership and Collaboration Engage with Finance, Supply Chain, and IT partners to understand business needs and translate them into technical requirements.
Participate in recurring strategic and operational touchpoints, including cFIN review sessions and architecture-focused team meetings.
Provide subject matter guidance on financial systems such as OneStream and other platforms influencing client's digital finance ecosystem.
Technical Leadership and Support Serve as the technical lead for solution implementations, enhancements, and integrations across finance and supply chain domains.
Address escalated issues, provide root-cause analysis, and ensure long-term stability of assigned applications.
Partner with engineering and operations teams to ensure solution resilience, performance, and sustainability.
Governance, Standards and Documentation Contribute to the development of architecture standards, design patterns, and best practices.
Maintain accurate architectural documentation, including roadmaps, diagrams, functional specifications, and integration models.
Continuous Improvement and Innovation Evaluate emerging technologies and recommend opportunities to enhance process efficiency, automation, and system capabilities.
Support modernization initiatives that strengthen client's digital transformation objectives in the finance and supply chain organizations.
Required Qualifications
- Education and Experience Bachelor's degree in Information Technology, Computer Science, Engineering, or related field (minimum required).
5 years of experience as a Solution Architect with financial systems.
Proven experience architecting solutions in enterprise finance and/or supply chain environments.
Deep knowledge of financial systems (e.g., OneStream, SAP cFIN (Central Finance), or similar platforms).
Familiarity with SAP finance and supply chain modules.
Strong understanding of systems integration, data flows, and enterprise application ecosystems.
Ability to translate complex technical concepts into clear business language.
Key Competencies Strategic Thinking Ability to design future-focused, scalable solutions.
Technical Expertise Strong architecture and platform skills across finance and supply chain.
Communication and Influence Effectively collaborates with technical and non-technical stakeholders.
Problem Solving Skilled at diagnosing complex issues and proposing durable solutions.
Execution Ability to manage multiple priorities and deliver high-quality outcomes.
Preferred Qualifications Experience working in a global, matrixed organization.
Understanding of data governance, security protocols, and architecture frameworks.
Demonstrated ability to lead collaborative solution workshops and stakeholder discussions.
Interview Process: Two rounds.
First round phone screen with direct manager.
Second round video panel interview, including technical review.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
SAP cFIN, OneStream
Remote working/work at home options are available for this role.
Job Family: General Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.
What will you do?
- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed
- Participating in design reviews to ensure accuracy and compliance with requirements
- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control
- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards
- Work closely with engineers and other designers to meet product specifications and performance requirements
- Modify and revise designs to correct operating deficiencies or to reduce production problems
- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.
- Check and validate designs to ensure they meet required quality and safety standards
- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications
- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications
- Designing and creating schematic PLC input/output connections.
- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.
- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team
- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration
- Capable of creating a Bill of Materials (BOM) for release to manufacturing
- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers
- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs
- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required
Experience:
- 6-8 years of experience in electrical design within the power distribution or data center industry.
- Proven experience as a CAD designer, preferably in an electrical engineering environment.
- Proficiency in CAD software (AutoCAD Electrical, Revit).
- Strong understanding of electrical systems, integration strategy, and system coordination
- Excellent problem-solving skills and attention to detail
- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently
Knowledge, Skills, Abilities:
- Strong knowledge of electrical design, manufacturing processes, and material properties.
- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.
- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.
- Excellent interpersonal and communication skills.
- Creative, self-motivated, accountable, and team-oriented.
- Able to work independently with minimal oversight.
- Effective at presenting information and responding to management, clients, and public queries.
- Capable of influencing others and sharing best practices.
- Comfortable working as part of a global team.
- Capable of assessing projects, articulating risks, and developing project milestones.
- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.
Jabil is a leading product solutions provider offering end-to-end design, manufacturing, supply chain, and product management services. With operations in over 100 facilities across 30 countries, Jabil delivers innovative, integrated, and customized solutions to clients across diverse industries—including automotive, consumer lifestyle and wearables, defense and aerospace, smart home and building, industrial and energy, enterprise and infrastructure, healthcare, mobility, packaging, and printing.
JOB SUMMARY
Jabil is seeking a Manufacturing Test Development Manager who will directly contribute to the transformative growth within our Intelligent Infrastructure division by applying unique and innovative approaches to solving problems within a large-scale software production environment. You and your team will be responsible for contributing to the end-to-end architecture, definition, development and production deployment of production software applications and infrastructure spanning multiple customers and manufacturing regions. You will also be responsible for interfacing with internal engineering, manufacturing and quality teams and our end customers to ensure your software deliverables meet the rigorous standards of Jabil’s world-class manufacturing environments.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
LEADERSHIP AND MANAGEMENT RESPONSIBILITIES
- People manager for a team of software developers and product engineers in support of global cloud operations.
- Attract, hire, onboard, lead, coach, mentor and inspire your team to deliver the best in class for our customers and employees
- Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines).
- Solicit ongoing self and team feedback from the business unit (BU), customer and team members.
- Perform team member evaluations professionally and on time.
- Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
- Coordinate activities of team and keep them focused in times of crises.
- Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
FUNCTIONAL MANAGEMENT RESPONSIBILITIES
- Plan and formulate aspects of Customer BU projects such as objective or purpose of project, applications that can be utilized from findings, costs of project, and equipment and human resource requirements, technical requirements.
- Provide direction on design and development activities to improve, modify or design new equipment products and processes.
- Oversee key projects, processes and performance reports, data, and analysis.
- Develop, determine, and implement policies, procedures and programs.
- Analyze technology trends, human resources needs and market demand to plan projects.
- Oversee definition and collaboration on overall test infrastructure and application architectures.
- Creation of behavioral and high-level software design specifications.
- Development of production infrastructure and related application code.
- Lead and participate in peer/code reviews.
- Contribute and improve software build methodology, procedures, and environment.
- Operational and development support for the software and test infrastructure at production facilities
JOB QUALIFICATIONS and KNOWLEDGE REQUIREMENTS:
- Knowledge of professional software engineering practices for the complete software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations.
- Agile, CICD, and SLDC process implementation and application experience.
- Knowledge/Expertise in the following programming/scripting languages: Python, BASH, Java experience a plus.
- Linux development experience with a solid understanding of its fundamentals and internals: Ubuntu/ CentOS
- Well-versed in the following container/virtualization environments: VMware, Docker.
- Solid understanding of large-scale distributed systems in practice, including multi-tier architectures, application security, monitoring and storage systems.
- Experience with front-end and back-end Web UI design.
- Experience with common web APIs (REST, XML-RPC).
- Experience with hardware and API solutions for controlling, managing and stressing L10 devices (servers, network and storage SSDs, NVMe): IPMI, Redfish, mprime, FIO, Linpack, ptugen, memtester
- Experience in the creation and configuration(DHCP, PXE boot, nginx) of Virtual Machines (VMs), VMWare preferred.
- Experience with leading edge networking systems, hardware, software and protocols including but not limited to enterprise ethernet datacenter switching/routing L1, L2, and L3 (BGP, DHCP Relay, ECMP). Arista CloudVision is a plus
- Experience with code versioning tools (Git preferred)
- Experience with front-end and back-end Web UI design.
- Experience with common web APIs (REST, XML-RPC).
EDUCATION & EXPERIENCE REQUIREMENTS
- BS degree in Electrical/Computer Engineering, Computer Science, or related field. MS preferred.
- 10+ years’ experience in a software development/test capacity with enterprise server, storage, or networking products. 3+ years people management experience.
- Excellent verbal and written communication skills.
- Prior experience directly managing software development teams
- Experience managing remote, multi-national and geographically dispersed development teams.
- Domestic and/or International travel, up to 25%, may be required.
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
What will you do?
- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
MINIMUM QUALIFICATIONS
Education:
- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
Experience:
- 8 years' experience in mechanical design and integration of mission-critical systems.
- Proven track record of successful system designs and implementations in a relevant industry
- Strong understanding of mechanical systems, integration strategy, and system coordination
- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
- Excellent problem-solving skills and attention to detail
- Strong communication and teamwork abilities
PREFERRED QUALIFICATIONS
- Master’s Degree in Mechanical Engineering
- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
