Engineering Jobs in None, OH
4,118 positions found
*Job Location: *100% remote (US based candidates only)
Our Mission
Prezent is on a mission to transform how enterprises communicate. Founded in 2021, we have rapidly grown into a 200+ person, fully remote team that’s backed by $40+ million in venture funding. Our AI-powered productivity platform, ASTRID, is the first solution purpose-built for enterprise communication needs—delivering up to 90% time savings and 60% cost reduction in presentation development.
Our Vision
We believe that effective communication accelerates business impact. By automating design best practices and tailoring content to audience dynamics, Prezent empowers teams to craft clear, engaging, and on-brand presentations at scale. Our focus is on enabling Fortune 2000 companies—particularly in industries like healthcare, biopharma, high-tech, banking, and insurance—to achieve better alignment, faster decision-making, and stronger business outcomes.
The Role
As a *Presentation Engineer*, you’ll join a dynamic team of technologists, designers, and strategists who bring business communication to life. Your mission is to bridge the gap between data, story, and design—transforming complex ideas into compelling presentations that drive real-world impact.
You’ll be the go-to partner and sounding board for our clients, helping them sharpen their storytelling, amplify impact, and build presentation excellence across their organizations. You’ll help teams plan and execute presentation calendars, bring the best of Prezent.AI to life, and guide users in effectively leveraging ASTRID, our AI-powered communication engine.
No two days will be the same—you’ll flex between understanding audience needs, engineering presentation workflows, and enabling leaders at every level to communicate with clarity, confidence, and impact.
What You’ll Do
* Partner with enterprise clients to understand their most critical communication challenges, presentation workflows, and opportunities for improvement.
* Become an embedded team member for the client, providing integral insights.
* Help teams craft and structure powerful narratives that drive influence and decision-making, from executive ready communication to messaging to the masses
* Design and build scalable, reusable presentation templates and storytelling frameworks within *Prezent*
* Be a trusted advisor—helping users learn and adopt AI-driven storytelling tools to elevate their work
* Deliver customized presentation solutions and lead pilots, trainings, and office hours to drive adoption, enable power users, and establish best practices
* Provide structured feedback loops from client experiences to our *product and design teams*, shaping the future of the platform by improving the ‘presentation brain’ for each account.
* Identify and nurture *warm leads* within existing accounts for software adoption and overnight presentation services
* Collaborate cross-functionally with *product*, *design*, and *engineering* teams to continuously refine user experience and product-market fit
What We’re Looking For
* A *storyteller* with strong business communication skills and a passion for helping others make their ideas land with impact
* Experience in *consulting, customer success, or business operations/strategy*
* A *scientific* or *technology focused foundation*—degree in life sciences, computer science, engineering or related field
* *1–3 years* of experience as a consultant in a client-facing, fast-paced environment.
* Strong project management skills, and able to execute on multiple projects at a time
* Strong analytical and problem-solving skills with a *structured approach* to ambiguity
* Agile, adaptable, and energized by working across disciplines
* A self-starter who thrives in dynamic settings and is passionate about creating an *AI-first business communications platform*
* A blend of *creativity and technical fluency*—comfortable both discussing technical aspects in either biopharma or the tech industry and about scaling workflows
Benefits
* *ESOPs*: You’ll be eligible for Employee Stock options.
* *Comprehensive Benefits*: Flexible, top-tier benefits package in line with US market standards.
* *Professional Growth*: Thrive in a fast-paced environment that encourages innovation, continuous learning, and career progression.
Job Type: Full-time
Pay: $55.00 - $65.00 per hour
Expected hours: 40 per week
Benefits:
* 401(k)
* Dental insurance
* Flexible schedule
* Health insurance
* Paid time off
* Vision insurance
Experience:
* strategic storytelling: 4 years (Required)
Work Location: In person
The Certified Medical Assistant / Registered Medical Assistant performs routine administrative and patient care support duties in a medical practice to assist medical and/or nursing staff in the examination and treatment of patients and ensures that the office runs smoothly.
Qualifications
Certifications: Registered Medical Assistant (RMA) (ARMA) - American Registry of Medical Assistants (ARMA)American Registry of Medical Assistants (ARMA); Registered Medical Assistant (RMA) (AAH) - American Allied Health (AAH)American Allied Health (AAH); Certified Medical Assistant (NCCT) - National Center for Competency Testing (NCCT)National Center for Competency Testing (NCCT); Certified Medical Assistant (CMA) - American Association of Medical Assistants (AAMA)American Association of Medical Assistants (AAMA); Registered Medical Assistant (RMA) (AMT) - American Medical Technologists (AMT)American Medical Technologists (AMT); Nationally Registered Certified Medical Assistant (NRCMA) - National Association for Health Professionals (NAHP)National Association for Health Professionals (NAHP); Certified Clinical Medical Assistant (CCMA) - National Healthcareer Association (NHA)National Healthcareer Association (NHA); Basic Life Support (BLS) within 30 days - American Heart Association (AHA)American Heart Association (AHA), Education: H.S. Diploma/GED, Work Experience:
Responsibilities
Rooming patients: Collecting pertinent information regarding the patient's chief complaint, family history, social history, surgical history, and medication reconciliation upon arrival for a patient visit. Telephone Interactions: As directed, completing necessary telephone communications with patients, families, pharmacies, and/or other health care facilities. Gathering information and maintaining patient information via telephone per department specific processes and policies. Administrative tasks including, but not limited to, patient check in or check out, prior authorizations, scheduling appointments, verification of benefits, and coordination of referrals and testing. Office procedures as directed and per department specific competencies. May perform procedures such as ear wash, wound care, bladder scanning, suture or staple removal, reading results of negative TB skin tests or steering patient to the care of a department nurse when TB screening appears to have indications of a positive read, and other diagnostic testing at the point of care. Provide patient with written instructions regarding procedures, medications, or follow up instructions at the direction of the provider. CMA staff may retrieve and provide condition specific education from the internet, internal website, or printed materials per the provider directions and orders. Administer medications per the provider order. Exceptions - biologic or Schedule II, III medications. Provide assistance with prescription medication refills per department protocols. Call medications into pharmacies, notify patients of refills, and documents actions within the EMR per provider orders. Maintain department specific competencies related to point of care testing, equipment handling, and specialty training. Update and maintain different registries within the department. EMR in-basket work, to include, but not limited to - result notes, medication refills, answering patient portal & telephone messages within scope. Collects and Processes specimens accurately Obtain and record vital signs accurately Perform Injections(IM, SQ) within scope Perform ear irrigations Perform bladder scans
About Us
Find it here.
Discover the job, the career, the purpose you were meant for. At Carle Health, we're committed to fostering a workplace where every team member feels valued, respected and empowered, where passion and purpose come together to positively impact the lives of our patients and our communities. Find it all at Carle Health.
Our nearly 17,000 team members and providers work together to support patient care across central and southeastern Illinois. We’ve grown to include eight, award-winning hospitals and a multispecialty provider group with more than 1,500 doctors and advanced practice providers. We’re developing the next generation of providers and healthcare professionals through Carle Illinois College of Medicine, the world’s first engineering-based medical school, and Methodist College. Carle BroMenn Medical Center, Carle Foundation Hospital, Carle Health Methodist Hospital, Carle Health Proctor Hospital, Carle Health Pekin Hospital, and Carle Hoopeston Regional Health Center hold Magnet® designations, the nation’s highest honor for nursing care. We offer opportunities in several communities throughout central Illinois with potential for growth and life-long careers at Carle Health.
We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Carle Health participates in E-Verify and may provide the Social Security Administration and, if necessary, the Department of Homeland Security with information from each new employee's Form I-9 to confirm work authorization. | For more information:
Compensation and Benefits
The compensation range for this position is $18.33per hour - $29.69per hour. This represents a good faith minimum and maximum range for the role at the time of posting by Carle Health. The actual compensation offered a candidate will be dependent on a variety of factors including, but not limited to, the candidate’s experience, qualifications, location, training, licenses, shifts worked and compensation model. Carle Health offers a comprehensive benefits package for team members and providers. To learn more visit /benefits.
The ideal candidate has strong technical expertise, excellent communication skills, and the ability to interpret complex engineering documents across multiple disciplines.
*Key Responsibilities*
* Review and evaluate engineering plans, calculations, and specifications for compliance with applicable local, state, and federal codes, ordinances, and standards
* Examine plans related to civil, structural, transportation, drainage, grading, utilities, and related engineering disciplines (scope may vary by assignment)
* Identify deficiencies, inconsistencies, and code violations; prepare clear and concise correction comments and reports
* Coordinate with engineers, architects, contractors, and agency staff to resolve plan review comments
* Provide technical guidance and interpretations of engineering codes and standards
* Maintain accurate records of plan reviews, approvals, and revisions
* Meet established turnaround times and service level agreements for plan review
* Stay current with changes in engineering codes, standards, and best practices
* Support permitting and entitlement processes as required by client agencies
*Required Qualifications*
* Bachelor’s degree in Civil Engineering or a related engineering discipline
* Minimum 4 years of experience in engineering plan review, design, or construction
* Strong knowledge of engineering codes, standards, and regulations
* Ability to read and interpret complex engineering plans, calculations, and technical reports
* Excellent written and verbal communication skills
* Strong organizational skills with the ability to manage multiple projects simultaneously
* Proficiency with standard engineering and plan review software (e.g., Bluebeam, AutoCAD, Civil 3D, or similar)
*Preferred Qualifications*
* Professional Engineer (PE) license or Engineer-in-Training (EIT) certification
* Previous experience working with or for public agencies
* Familiarity with electronic plan review systems
* Experience in consulting or third-party plan review services
*Work Environment & Benefits*
* Collaborative consulting environment supporting a variety of public and private sector clients
* Competitive compensation commensurate with experience
* Benefits package includes health insurance, retirement plan, paid time off, and professional development opportunities
*About EP Ferris and Associates*
E.P. Ferris and Associates is a professional consulting firm providing specialized plan review and engineering support services to public agencies. The firm is committed to technical excellence, responsiveness, and delivering high-quality service to its clients.
Job Type: Full-time
Benefits:
* 401(k)
* 401(k) matching
* Dental insurance
* Employee assistance program
* Health insurance
* Life insurance
* Paid time off
* Referral program
* Retirement plan
* Vision insurance
Application Question(s):
* What is your proficiency with standard engineering and plan review software (Bluebeam, AutoCAD, Civil 3D, or similar)?
Experience:
* engineering plan review, design, or construction: 4 years (Required)
License/Certification:
* Professional Engineer (PE) or Engineer-in-Training (EIT) (Preferred)
Work Location: In person
Position Description
Immediately hiring a Permanent Full Time Experienced Mid-Level Diesel Trailer Technician to support our Truck Fleet at Ryder in Hurricane, Utah.
Hear it from a Ryder Technician Employee Here:
- Hourly Pay: $26.00 per hour
- Certification Bonus of $100 for each New ASE Certification Obtained up to $700
- Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year
- Trailer Experience REQUIRED
- Schedule: Monday–Friday Weekends OFF
- Hours: First Shift 8:00 am – 4:30 pm
We want the right Maintenance Repair Mechanic to join us at Ryder to work on Heavy Duty Vehicles.
Apply Here with Ryder Today
We have all the benefits other shops do without the wait!
- Annual Merit Pay Increases Every Year
- On the Job Paid Training
- Medical, Dental, Vision, 401 K etc. Start at 30 Days
- We love our Ryder babies and offer 12 weeks of PAID Maternity Leave for qualifying employees (eligibility requirements, including work tenure, apply)
- Paid Time Off Starts Accruing at DAY ONE with 80 hours per year
- Additional Day Off for U.S. Military Veterans
- 401 K offers a company match
- HIGH VALUED Stock at 15 % Employee Discount
- PPE, UNIFORMS, AND BOOT ALLOWANCE PROVIDED
- Ryder Top Technician Recognition Programs rewards 12 Top Techs each year with Cash Prizes from $250 to $50,000!
- Technician Tuition Repayment Program up to $5,000! Ask your recruiter about it today!
Click Here to See All Ryder Careers:
We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday
Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more!
EEO/AA/Female/Minority/Disabled/Veteran
Requirements
- High school diploma or equivalent preferred
- Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred
- Basic tools, required
- Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:
- Routine preventative maintenance, which should include oil changes, brake and tire work, required
- Two (2) years or more of a combination of classroom training and work experience in required experience, preferred
- Valid Commercial Driver License (CDL) CLASS A,preferred
- This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:
- Must be able to obtain CDL within 6 months after hire
- Pass a Ryder Drug Test
- Pass a DOT physical
- Pass a Ryder road test
- Pass a Ryder Background and Motor vehicle check including drug and alcohol verification from previous employers for the last 3 years
Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.
Responsibilities
- Performs vehicle maintenance and repair duties
- Performs standard vehicle maintenance
- Performs standard component inspections and repairs
- Performs preventive maintenance
- Diagnoses standard mechanical and electronic problems, utilizing diagnostic computer when applicable
- Identifies root cause of basic failures/conditions and perform repairs as required
- Replaces defective components as instructed
- Performs facility maintenance duties
- Interacts with customers/drivers to properly determine nature of complaint once assigned a task
- Utilizes key functions of Shop Management System and electronic documentation available
- Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT)
- Performs other support duties as required to support operations. These could include but are not limited to Service Island support
Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.
Posted Date 1 month ago (2/3/2026 4:12 PM)
Requisition ID 2
Location (Posting Location) : State/Province UT
Location (Posting Location) : City HURRICANE
Location (Posting Location) : Postal Code 84737
Category Technicians/Service Employees4
Employment Type Regular-Full time
Travel Requirements 0-10%
Position Code 1000120
Min Pay USD $26.00/Hr.
Max Pay USD $26.00/Hr.
Position Description
Ryder is hiring a Mobile Maintenance Diesel Technician in Mobile, Alabama — offering weekly pay, excellent benefits, and a Technician career you can feel good about.
Hear it from a Ryder Technician Employee Here:
- Mobile Technicians are issued a Ryder Mobile Maintenance Truck for Service Calls
- Hourly Pay: $32.00 per hour
- Certification Bonus of $100 for each New ASE Certification Obtained up to $700
- Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year
- Sign On Bonus: Ryder Pays You $1750 at 30 days and $1750 at 90 days
- Schedule: Monday–Friday Weekends OFF
- Hours: First Shift 7:00 am – 3:30 pm
We want the right Mobile Maintenance Mechanic to join us at Ryder to work on Heavy Duty Vehicles
Apply Here with Ryder Today
Spots are filling fast — click apply now to secure your spot.
Questions? Call Dominique or text “Mobile MT3” to 9 to speak with your recruiter today.
All the benefits you expect — without the wait.
- Medical, Dental, Vision after 30 days
- 80 hours PTO your first year, starting Day 1
- Yearly merit pay increases
- 401 (k) company match
- PPE, uniforms, and boot allowance
- Build your skills - paid training
- Safety‑first workplace & State-of-the-art equipment
- Top Tech Competition: Earn $250 – $50,000 per year
- U.S. military veterans - extra paid day off
- 15% company stock discount
- Up to $5,000 in Tech tuition repayment
- 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure)
- Employee discounts on tools, vehicles, travel, tech & more
Click Here to See All Ryder Careers:
We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday
Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more!
EEO/AA/Female/Minority/Disabled/Veteran
Requirements
- High School diploma or equivalent
- Vocational or Technical Certification in related field preferred
- Two (2) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment
- Must have minimum tools required to perform their job duties as outlined in Ryder's Maintenance policy 2.02
- Pass a Ryder drug test and previous employer's for the past 3 years, DOT physical, Ryder road test, pass a Ryder Background check and Motor vehicle check including Drug and Alcohol verification from previous employers for the last 3 years
- Able to take home assigned mobile service truck as applicable and secure vehicle and contents preferred
- Must be able to drive Ryder vehicles
- Ability to understand and adhere to Company policies in all areas
- Proven hands-on mechanic, customer service, and account management skills
- Ability to complete repair orders with the Company established systems
- Demonstrates customer service skills. Strong relationship management skills
- Strong verbal and written communication skills
- Ability to create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors)
- Ability to work independently and as a member of a team
- Ability to prioritize workload
- Flexibility to operate and self-driven to excel in a fast-paced environment
- Self-starter and self-sufficient approach
- Capable of multi-tasking, highly organized, with excellent time management skills
- Detailed oriented with excellent follow-up practices
- Entrepreneurial spirit
- Other Service Island support - SBTIII trained - SBT220 within 180 Days
- Other Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mix (predominant OEM of fleet mix) within 1 year
- Other Tire & Wheel safety - TW220 within 90 Days
- Other Preventive Maintenance: qualified - (PM230&PM298) within 90 Days
- Other Brakes-Air qualified - (BA220&BA298) within 90 Days
- Other Must meet qualifications of brake mechanic and inspectors (FMCS 396.25)
- Other Brake Hydraulic qualified - (BH220&BH298) where appropriate within 90 Days
- Other A/C recycling/recovery certified - CF609 within 90 Days
- Other A/C qualified - (AC220&AC298) within 180 Days
- Other HD electrical trained - DR208 within 90 Days
- Valid NonCommercial Driver License CLASS E, Commercial Driver License (CDL) CLASS A and/or State driver's license as required
- DOT Safety Regulated Position
- Safety Sensitive Position
Regulated Tech:
- Pass a Ryder Drug Test
- Pass a DOT physical
- Pass a Ryder road test
- Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years
Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.
Responsibilities
- Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer. Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction. Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:
- A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks
- Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified
- Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes
- Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions
- Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check
- Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation
- Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems
- Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables
- Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights
- Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers
- Driveline: Lubricate drive line; Inspect components for wear or damage
- Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks
- Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition
- Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors
- Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal
- Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc.
- Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298)
- Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism
- Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents
- Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements
- Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer
- Act as a mentor for the Mobile Technician II level
- Performs other duties as assigned
Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.
Posted Date 3 days ago (3/16/2026 5:33 PM)
Requisition ID 2
Location (Posting Location) : State/Province AL
Location (Posting Location) : City MOBILE
Location (Posting Location) : Postal Code 36618
Category Technicians/Service Employees8
Employment Type Regular-Full time
Travel Requirements 0-10%
Position Code 1000127
Min Pay USD $32.00/Hr.
Max Pay USD $32.00/Hr.
Position Description
Immediately hiring a Permanent Full Time Experienced Mid-Level Diesel Technician to support our Truck Fleet at Ryder in Opelika, Alabama
Call Nick or text “Opelika T2” to 9
Hear it from a Ryder Technician Employee Here:
- Hourly Pay: $24.45 per hour
- Certification Bonus of $100 for each New ASE Certification Obtained up to $700
- Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year
- Sign On Bonus: Ryder Pays You $1250 at 30 days and $1250 at 90 days
- Schedule: Monday–Friday Weekends OFF
- Hours: First Shift 7:30 am – 4:00 pm
We want the right Maintenance Repair Mechanic to join us at Ryder to work on Heavy Duty Vehicles.
Apply Here with Ryder Today
Spots are filling fast — click apply now to secure your spot.
Questions?
Call Nick or text “Opelika T2” to 9 to speak with your recruiter today
We have all the benefits other shops do without the wait!
- Annual Merit Pay Increases Every Year
- On the Job Paid Training
- Medical, Dental, Vision, 401 K etc. Start at 30 Days
- We love our Ryder babies and offer 12 weeks of PAID Maternity Leave for qualifying employees (eligibility requirements, including work tenure, apply)
- Paid Time Off Starts Accruing at DAY ONE with 80 hours per year
- Additional Day Off for U.S. Military Veterans
- 401 K offers a company match
- HIGH VALUED Stock at 15 % Employee Discount
- PPE, UNIFORMS, AND BOOT ALLOWANCE PROVIDED
- Ryder Top Technician Recognition Programs rewards 12 Top Techs each year with Cash Prizes from $250 to $50,000!
- Technician Tuition Repayment Program up to $5,000! Ask your recruiter about it today!
Call Nick or text “Opelika T2” to 9 to
Click Here to See All Ryder Careers:
We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday
Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more!
EEO/AA/Female/Minority/Disabled/Veteran
Requirements
- High school diploma or equivalent preferred
- Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred
- Basic tools, required
- Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:
- Routine preventative maintenance, which should include oil changes, brake and tire work, required
- Two (2) years or more of a combination of classroom training and work experience in required experience, preferred
- Valid Commercial Driver License (CDL) CLASS A,preferred
- This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:
- Must be able to obtain CDL within 6 months after hire
- Pass a Ryder Drug Test
- Pass a DOT physical
- Pass a Ryder road test
- Pass a Ryder Background and Motor vehicle check including drug and alcohol verification from previous employers for the last 3 years
Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.
Responsibilities
- Performs vehicle maintenance and repair duties
- Performs standard vehicle maintenance
- Performs standard component inspections and repairs
- Performs preventive maintenance
- Diagnoses standard mechanical and electronic problems, utilizing diagnostic computer when applicable
- Identifies root cause of basic failures/conditions and perform repairs as required
- Replaces defective components as instructed
- Performs facility maintenance duties
- Interacts with customers/drivers to properly determine nature of complaint once assigned a task
- Utilizes key functions of Shop Management System and electronic documentation available
- Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT)
- Performs other support duties as required to support operations. These could include but are not limited to Service Island support
Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.
Posted Date 2 days ago (3/17/2026 10:14 AM)
Requisition ID 2
Location (Posting Location) : State/Province AL
Location (Posting Location) : City OPELIKA
Location (Posting Location) : Postal Code 36801
Category Technicians/Service Employees4
Additional Locations (use this field to indicate if position can be domiciled in several areas) US-GA-COLUMBUS | US-GA-LA GRANGE | US-AL-ALEXANDER CITY
Employment Type Regular-Full time
Travel Requirements 0-10%
Position Code 1000120
Min Pay USD $24.45/Hr.
Max Pay USD $24.45/Hr.
Position Description
Ryder is hiring an experienced Mid-Level Diesel Technicianin Mobile, Alabama — offering weekly pay, excellent benefits, and a Technician career you can feel good about.
Hear it from a Ryder Technician Employee Here:
- Hourly Pay: $27.50 per hour
- Certification Bonus of $100 for each New ASE Certification Obtained up to $700
- Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year
- Sign On Bonus: Ryder Pays You $1250 at 30 days and $1250 at 90 days
- Schedule: Monday–Friday Weekends OFF
- Hours: First Shift 7:00 am – 3:30 pm
We want the right Maintenance Repair Mechanic to join us at Ryder to work on Heavy Duty Vehicles.
Apply Here with Ryder Today
Spots are filling fast — click apply now to secure your spot.
Questions? Call Kim or text “Mobile T2” to 9 to speak with your recruiter today.
All the benefits you expect — without the wait.
- Medical, Dental, Vision after 30 days
- 80 hours PTO your first year, starting Day 1
- Yearly merit pay increases
- 401 (k) company match
- PPE, uniforms, and boot allowance
- Build your skills - paid training
- Safety‑first workplace & State-of-the-art equipment
- Top Tech Competition: Earn $250 – $50,000 per year
- U.S. military veterans - extra paid day off
- 15% company stock discount
- Up to $5,000 in Tech tuition repayment
- 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure)
- Employee discounts on tools, vehicles, travel, tech & more
Click Here to See All Ryder Careers:
We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday
Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more!
EEO/AA/Female/Minority/Disabled/Veteran
Requirements
- High school diploma or equivalent preferred
- Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred
- Basic tools, required
- Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:
- Routine preventative maintenance, which should include oil changes, brake and tire work, required
- Two (2) years or more of a combination of classroom training and work experience in required experience, preferred
- Valid Commercial Driver License (CDL) CLASS A,preferred
- This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:
- Must be able to obtain CDL within 6 months after hire
- Pass a Ryder Drug Test
- Pass a DOT physical
- Pass a Ryder road test
- Pass a Ryder Background and Motor vehicle check including drug and alcohol verification from previous employers for the last 3 years
Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.
Responsibilities
- Performs vehicle maintenance and repair duties
- Performs standard vehicle maintenance
- Performs standard component inspections and repairs
- Performs preventive maintenance
- Diagnoses standard mechanical and electronic problems, utilizing diagnostic computer when applicable
- Identifies root cause of basic failures/conditions and perform repairs as required
- Replaces defective components as instructed
- Performs facility maintenance duties
- Interacts with customers/drivers to properly determine nature of complaint once assigned a task
- Utilizes key functions of Shop Management System and electronic documentation available
- Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT)
- Performs other support duties as required to support operations. These could include but are not limited to Service Island support
Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.
Posted Date 3 days ago (3/16/2026 5:29 PM)
Requisition ID 2
Location (Posting Location) : State/Province AL
Location (Posting Location) : City MOBILE
Location (Posting Location) : Postal Code 36618
Category Technicians/Service Employees4
Employment Type Regular-Full time
Travel Requirements 0-10%
Position Code 1000120
Min Pay USD $27.50/Hr.
Max Pay USD $27.50/Hr.
Position Description
Ryder is hiring a Senior Level Diesel Technician in Winston Salem, NC — offering weekly pay, excellent benefits, and a Technician career you can feel good about.
Hear it from a Ryder Technician Employee Here:
- Hourly Pay: $28.50 per hour
- Certification Bonus of $100 for each New ASE Certification Obtained up to $700
- Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year
- Sign On Bonus: Ryder Pays You $1750 at 30 days and $1750 at 90 days
- Schedule: Tuesday through Saturday
- Hours: First Shift 7:00 am to 3:30 pm
We want the right Maintenance Repair Mechanic to join us at Ryder to work on Heavy Duty Vehicles
Apply Here with Ryder Today
Spots are filling fast — click apply now to secure your spot.
Questions? Call Nick or text “Winston” to 9
to speak with your recruiter today.
All the benefits you expect — without the wait.
- Medical, Dental, Vision after 30 days
- 80 hours PTO your first year, starting Day 1
- Yearly merit pay increases
- 401 (k) company match
- PPE, uniforms, and boot allowance
- Build your skills - paid training
- Safety‑first workplace & State-of-the-art equipment
- Top Tech Competition: Earn $250 – $50,000 per year
- U.S. military veterans - extra paid day off
- 15% company stock discount
- Up to $5,000 in Tech tuition repayment
- 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure)
- Employee discounts on tools, vehicles, travel, tech & more
Click Here to See All Ryder Careers:
We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday
Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more!
EEO/AA/Female/Minority/Disabled/Veteran
Requirements
- High school diploma or equivalent preferred
- Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred
- Basic tools, required
- Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:
- Routine preventative maintenance, which should include oil changes, brake and tire work
- Basic diagnostics and repairs, including AC and electrical systems, required
- Three (3) years or more relevant work experience, preferred
- All other certification as required by location, required
- Valid Commercial Driver License (CDL) CLASS A,preferred
- All other certification as required by location, required
- ADDITIONAL REQUIREMENTS:
- Must have a minimum of 2 years of experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment
- Knowledge of and the ability to apply knowledge of computer skills: PC, Windows, mouse, etc.
- This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:
- Must be able to obtain CDL within 6 months after hire
- Pass a Ryder Drug Test
- Pass a DOT physical
- Pass a Ryder road test
- Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years
Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.
Responsibilities
- Performs vehicle maintenance and repair duties including:
- Performs standard vehicle maintenance
- Performs preventive maintenance
- Diagnoses complex mechanical and electronic problems utilizing diagnostic computer when applicable
- Completes complex and detailed mechanical inspections & repairs with minimal supervision
- Replaces defective components as instructed
- Works unsupervised on most tasks
- Performs facility maintenance duties
- Interacts with customers/drivers to properly determine nature of complaint once assigned a task.
- Utilizes key functions of Shop Management System and electronic documentation available.
- Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT).
- Acts as mentor for Tech 1 and Tech 2 levels.
- Demonstrate the ability to access and use internal and external maintenance documents.
- Other support duties as required to support operations. These could include but are not limited to Service Island support
- SBTIII trained within 180 days (SBT220)
- Complete 2 of the OEM On-Line diagnostic scan tool software courses as required by location fleet mi. (predominant OEM of fleet mix completed within 365days)
Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.
Posted Date 2 days ago (3/17/2026 10:06 AM)
Requisition ID 2
Location (Posting Location) : State/Province NC
Location (Posting Location) : City WINSTON SALEM
Location (Posting Location) : Postal Code 27101
Category Technicians/Service Employees5
Additional Locations (use this field to indicate if position can be domiciled in several areas) US-NC-GREENSBORO | US-NC-Lexington | US-NC-Burlington
Employment Type Regular-Full time
Travel Requirements 0-10%
Position Code 1000356
Min Pay USD $30.00/Hr.
Max Pay USD $30.00/Hr.
The Certified Medical Assistant/Registered Medical Assistant performs routine administrative and patient care support duties that assists the Dept to maintain compliance with regulatory standards. This position will meet the needs of Carle Health in caring for our future and current employees.
Qualifications
Certifications: Certified Medical Assistant (CMA) - American Association of Medical Assistants (AAMA); Registered Medical Assistant (RMA) (AAH) - American Allied Health (AAH); Certified Medical Assistant (NCCT) - National Center for Competency Testing (NCCT); Basic Life Support (BLS) within 30 days - American Heart Association (AHA); Registered Medical Assistant (RMA) (AMT) - American Medical Technologists (AMT), Education: H.S. Diploma/GED, Work Experience:
Responsibilities
Rooming patients: collecting pertinent information regarding the reason for visit Good customer service Telephone interactions: communications with patients and other health care facilities. Administrative tasks: patient check in and out, scheduling appts. ordering supplies, Quality checks on equipment, documentation in computer programs. Office procedures as directed and per department specific competencies Maintain department specific competencies. Administer vaccinations Provides support to the nursing staff. Performs N95 mask fit testing. Reviews immunizations for completeness. Ensures documentation of care is complete and accurate. Assist in influenza vaccination campaign Assist in pre placement physicals. Monitor vital signs. Assess for allergic reactions
About Us
Find it here.
Discover the job, the career, the purpose you were meant for. At Carle Health, we're committed to fostering a workplace where every team member feels valued, respected and empowered, where passion and purpose come together to positively impact the lives of our patients and our communities. Find it all at Carle Health.
Our nearly 17,000 team members and providers work together to support patient care across central and southeastern Illinois. We’ve grown to include eight, award-winning hospitals and a multispecialty provider group with more than 1,500 doctors and advanced practice providers. We’re developing the next generation of providers and healthcare professionals through Carle Illinois College of Medicine, the world’s first engineering-based medical school, and Methodist College. Carle BroMenn Medical Center, Carle Foundation Hospital, Carle Health Methodist Hospital, Carle Health Proctor Hospital, Carle Health Pekin Hospital, and Carle Hoopeston Regional Health Center hold Magnet® designations, the nation’s highest honor for nursing care. We offer opportunities in several communities throughout central Illinois with potential for growth and life-long careers at Carle Health.
We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Carle Health participates in E-Verify and may provide the Social Security Administration and, if necessary, the Department of Homeland Security with information from each new employee's Form I-9 to confirm work authorization. | For more information:
Compensation and Benefits
The compensation range for this position is $18.33per hour - $29.69per hour. This represents a good faith minimum and maximum range for the role at the time of posting by Carle Health. The actual compensation offered a candidate will be dependent on a variety of factors including, but not limited to, the candidate’s experience, qualifications, location, training, licenses, shifts worked and compensation model. Carle Health offers a comprehensive benefits package for team members and providers. To learn more visit /benefits.
Temperature Measuring Instrumentation Manufacturer in Southeast Houston seeking an EXPERIENCED Machinist with CNC LATHE AND MILL experience. Must have experience with both. Parts are small to medium.
Job Type: Full-time
Responsibilities:
- Set up and operate CNC machines to perform precision machining operations
- Write Code - G Code
- Simple programming/modifications
- Read and interpret blueprints, engineering drawings, and specifications
- Use calipers, bore gauges, and other measuring instruments to ensure parts meet quality standards
- Monitor machine performance and make adjustments as necessary
- Basic Maintenance on machines to ensure optimal performance
- Collaborate with team members to troubleshoot and resolve production issues
- Follow safety protocols and maintain a clean and organized work area
- Familiar working with 304/316SS and Inconel material.
Qualifications:
- High school diploma or equivalent
- Previous experience as a CNC Machinist - 5yrs+
- Strong mechanical knowledge and understanding of machining processes
- Proficiency in using calipers, bore gauges, and other measuring instruments
- Familiarity with Solidworks/CAD software for reading blueprints and engineering drawings
- Ability to operate a forklift a plus
- Experience with Fanuc controls a must
- Experience with Gun Drilling a plus
- Strong attention to detail and ability to work with precision
- Ability to work independently as well as part of a team
- Experience with machine repair is a plus.
- Experience with Mitsubishi Medlas controls a plus.
-Ability to multi-task is a MUST.
- Must be able to clean/maintain machines.
- None Smoking Facility
- No Felonies will be acceptable - Background history processed.
Benefits:
- SEP - Retirement
- Health insurance
- Paid time off
