Engineering Jobs in Millwood, NY

About the Company

At MetroWall, we hold our values close to heart, with respect being the cornerstone of our interactions. We believe that fostering a respectful environment not only enhances collaboration but also drives innovation. Overcoming obstacles is part of our journey, and we view challenges as opportunities to grow and improve. By embracing these challenges, we consistently strive to exceed expectations, delivering exceptional results and setting new standards in our industry. Together, these values create a culture of excellence and continuous improvement. Alignment with these values is critical to the success of any employee at MetroWall.

About the Role

The Manufacturing Engineer acts as the bridge between Engineering and Production, owning all aspects of process definition, manufacturability, and continuous improvement for MetroWall’s glass partition, door, and framing systems.

RELOCATION ASSISTANCE NOT AVAILABLE.

Responsibilities

Process Design & Standardization:

• Develop, document, and maintain manufacturing processes for aluminum and door assembly operations
• Create Standard Operating Procedures (SOPs), setup sheets, visual work instructions, and tool/fixture lists
• Define operation sequences, routing steps, and cycle times in ERP (Epicor/Kinetic)
• Establish and maintain machine capability matrices, ensuring processes align with equipment limitations

Design for Manufacturability (DFM):

• Participate in NPI and R&D project reviews to ensure designs are manufacturable within MetroWall’s equipment and process constraints
• Collaborate with Product Design Engineers to optimize part geometry, tolerances, and hardware selection
• Approve manufacturability sign-offs prior to product release (NPI Phase Gate)

Process Improvement & Cost Reduction:

• Analyze production performance data to identify waste, bottlenecks, and rework causes
• Implement Kaizen and lean initiatives
• Lead trials to validate improved processes, new jigs, or revised toolpaths

Collaboration & Support:

• Work closely with Production Managers to ensure practical implementation of processes
• Support Production Engineers during complex custom projects or prototypes
• Serve as a technical escalation point for production issues

Document & Revision Control:

• Maintain all process documentation under version control (aligned with Engineering ECO system)
• Link controlled documents to Epicor Work Orders and routings
• Audit shop floor adherence to latest revision

Safety & Compliance:

• Ensure compliance with OSHA and internal safety standards
• Integrate safety instructions directly into work procedures

Qualifications:

• Bachelor’s degree in Mechanical, Industrial, or Manufacturing Engineering.
• 3+ years of manufacturing experience (preferably architectural aluminum/glass or similar fabrication).
• Hands-on understanding of CNC machining, cutting, drilling, and assembly operations.
• Familiarity with Epicor/Kinetic, AutoCAD/Inventor, and Lean manufacturing tools.
• Strong documentation and communication skills.
• Ability to work cross-functionally between Engineering and Production.
• Strong organizational abilities to manage multiple tasks and projects simultaneously. Skilled in identifying issues, analyzing options, and implementing effective solutions in a timely manner.
• Keen attention to detail with a commitment to producing high-quality work, ensuring accuracy and precision in all tasks.

Work Environment

• Office & Field

Additional Responsibilities:

• Work with all members of the MetroWall team to deliver a level of customer service that exceeds the expectations of our customers
• Assist sales team personnel in selecting solutions for clients
• Continuously improve existing/new internal processes and deliverables
• Obtain thorough understanding of MetroWall products and their capabilities in order to provide support to other teams/team members

Job Title: Service Operations Manager

Job Type: Full-time

Location: Hawthorne, NY (Hybrid)

Who Are We

Leviant deploys UV-C sanitization technology inside hospitals and hotels. Every device in the field represents a commitment to cleaner, safer environments. This role exists to keep that promise. A cleaner hospital is a safer hospital.

We move fast, hold ourselves to a high standard, and expect the same from the people around us. If you thrive with real responsibility, take pride in closing loops, and have a low tolerance for vague processes or dropped balls — read on.

The Role

This is a high-accountability, high-visibility role at the center of Leviant’s field operations. You will manage the full lifecycle of service requests — intake, triage, technician dispatch, parts coordination, documentation, invoicing, and closure.

Every service event contains valuable data. Recurring failures, error codes, and technician visits reveal insights about device performance. Your job is to capture those signals and translate them into improvements for product, service, and operations.

This role also includes time in the field. You will visit customer sites, shadow technicians, and speak with EVS teams and facility managers to understand how devices perform in real environments.

What You’ll Own

Service Intake & Triage

·  Serve as the first point of contact for service requests

·  Assess urgency and determine the fastest path to resolution

·  Provide remote troubleshooting and escalate when needed

Technician Dispatch & Coordination

·  Match service needs with the right technician and parts

·  Coordinate scheduling and maintain clear communication with customers

·  Ensure work is completed to Leviant standards

Parts & Inventory Management

·  Track repair and consumable inventory

·  Coordinate shipments so technicians arrive prepared

Salesforce & Documentation

·  Maintain accurate service records

·  Build a historical record for each device and customer site

·  Track personnel changes at customer locations

Invoicing & Financial Accuracy

·  Ensure work orders are complete and invoiced promptly

·  Maintain financial accuracy across service operations

Continuous Improvement

·  Lead weekly service reviews

·  Identify patterns in field issues and communicate insights to engineering

·  Improve internal service workflows

Field Presence

·  Conduct site visits to observe device performance

·  Build relationships with EVS teams and facility managers

·  Bring field insights back to improve product and service quality

What We Require

·  Relentless follow-through and ownership

·  Strong organizational ability

·  Fluency with CRM systems and productivity tools

·  AI-forward mindset to improve workflows

·  Clear professional communication

·  Adaptability in hospital environments

·  Strong collaboration across teams

Preferred Qualifications

·  Experience in service operations or field coordination

·  Experience managing technicians or service logistics

·  Familiarity with inventory management and invoicing

·  Experience with Salesforce or similar CRM platforms

·  Experience implementing AI tools in workflows

·  Healthcare, facilities, or hospitality operations experience

·  Second language (Spanish, Russian, or French)

Leviant is an equal opportunity employer. We evaluate candidates based on ability, character, and drive.

Join our team and Be You Be Aptar

Aptar is seeking a Molding Process Technician based in Congers, NY. The primary function of the Molding Process Technician is to operate injection molding equipment in order to successfully meet production demands and quality standards.

As a Molding Process Technician, you will:

• Utilize your mechanical skills to install, remove and adjust Injection Molding machinery and equipment
• Troubleshoot Injection Molding machines, follow process to resolve failures, other problems
• Perform set-up of molds for all mold changes
• Assist in preventative maintenance and repair of molding machines, molds and peripherals (robots)
• Coordinates and sets up machines, robots and other equipment performing necessary tests to ensure company compliance. Trains employees in the correct procedures for operation as needed.
• Perform cleaning and general maintenance tasks
• Maintain a safe work environment following Company’s safety, ISO standards
• Achieve adequate production levels while maintaining the expected product quality
• Ensure molded components meet all product quality criteria including dimensional criteria
• Communicate to supervisor and other technicians and document all technical information and issues
• Participate in reducing the rate of scrap
• Assist in training of employees in proper work methods for safe and efficient performance of job duties.
• Maintain records, files and other documentation pertinent to assignments.

Who we are looking for:

Required Skills:

• 1-3 years of experience working with injection molding equipment including machine adjustment, troubleshooting and mold installation and removal
• Strong mechanical aptitude and mechanical skills.
• Familiarity with automation 6/3 robotics
• General knowledge of plastic materials and processes
• Detail oriented
• Ability to implement and tune all peripherals (6 axis robot, grinder)
• Strong verbal and written communication skills
• Strong Mathematical aptitude
• Ability to read blueprints, use precision measuring/inspection tools
• Effective computer skills, documentation, reporting, file management and web skills
• Ability to work different work shifts
• Continual improvement mindset. Self-Learner, trend of continuous learning
• Ability to work and operate machinery in a Clean Room Environment.
• Physically capable of the required work including but not limited to: Extensive use of manual dexterity, ability to grip, firmly hold, turn and practice strong hand coordination in order to troubleshoot, service and repair industrial equipment and use hand tools to perform the same.
• Ability to regularly stand, walk, and bend during performance of essential job duties. Ability to lift up to 50 pounds.
• Understands and practices safe working procedures. Observes safety rules and policies; brings to managements’ attention any unsafe acts or conditions

Who We are

At Aptar, we leverage insights, design, engineering and science to develop drug and consumer product dosing, dispensing and protection technologies for many of the world’s leading brands. Aptar in turn makes a meaningful difference in the lives, looks, health and homes of millions of patients and consumers around the world. Our innovations nasal drug delivery for emergency medicines, precise fragrance applications, mess-free ketchup dispensing for kids, connected technologies that support patients in adhering to their treatments and much more

With manufacturing facilities across North America, Europe, Asia and South America, and a dedicated team of over 13,000 employees in about 20 countries, Aptar is committed to creating impactful innovations for our customers and their consumers.

Our Culture

At Aptar, our success is driven by the individuals who contribute their unique talents and perspectives every day. We believe that when you bring your authentic self to work, we all thrive.

How We Support Our Employees

• An exciting, inclusive and value based working environment
• Award-winning corporate university offering personal development and training opportunities.
• Competitive base salary and performance-based bonus plan.
• Contribute to the communities where we reside.
• Innovative benefits plan which includes: 401k & Retirement Savings plan, vacation, medical, dental, vision, life, disability, pet insurance, wellness plan, and generous paid maternity/paternity leave.

Compensation and Base Annual Pay

In compliance with pay transparency requirements, the salary range for this role is USD $36.00 to USD $45.00 per hour. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. Aptar also offers a variety of benefits, including health, life, and disability insurance, 401(k) match and employer retirement savings contribution, flexible spending accounts, EAP, education assistance, parental leave, paid time off, company-paid holidays, and more. The specific programs and options available to an employee may vary depending on location, pay class, or other factors.

Aptar is an equal opportunities employer. We believe that a diverse workforce is key to our success. We welcome applications from all members of society irrespective of age, sex, disability, sexual orientation, race, religion or belief.

Stay updated on career opportunities by following us on LinkedIn!

JOB SUMMARY

This position is the Lead Maintenance person for Production startup. This position leads maintenance activities in the Company for all process/packaging and utility systems to aid in smooth startup and operations.

Performs work to keep machines, mechanical equipment, and the systems of buildings in repair.

DUTIES & ESSENTIAL JOB FUNCTIONS:

• Coordinates and leads start-up Maintenance Technicians to address and resolve start-up issues.
• Upon production start time, diagnose, troubleshoot, and repair startup problems.
• Troubleshoots and resolves other production issues.
• Communicates startup issues to the maintenance and Engineering team.
• Upon completion of start up duties, performs other maintenance duties as directed by Managers.
• Develops solutions to avoid recurring startup issues.
• Enters and completes work orders with documentation in FIIX.
• Becomes proficient in diagnosing and troubleshooting controls and electrical issues.
• Performs routine maintenance, such as inspecting drives, motors, or belts, checking fluid levels, replacing filters, or doing other preventive maintenance actions.
• Inspects, operates, or tests machinery or equipment to diagnose machine malfunctions.
• Adjusts functional parts of devices or control instruments, using hand and measuring tools.
• Pipe fitting; HVAC maintenance; insulating; welding; machining; carpentry; repairing electrical or mechanical equipment; installing, aligning, and balancing new equipment; and repairing buildings, floors, or stairs.
• Trains and/or supervises maintenance personnel.

OTHER FUNCTIONS AND RESPONSIBILITIES:

• Follows all safety, Lock-Out/Tag-Out procedures, and food safety Company protocols.
• Reports all safety or quality problems to management, QA, and SQF practitioner.
• Performs other duties as assigned.

QUALIFICATIONS and COMPETENCIES:

• Minimum High school diploma or general education degree (GED), and 5 to 10 years of related experience and/or training, or equivalent combination of education and experience required.
• Required knowledge in electrical and HMI controls.
• Computer skills required: Microsoft Office Suite; CMMS Systems, General PC skills and comfort level.
• Other skills required:
• Bilingual with Proficiency in English and Spanish
• Ability to learn and work with electronic process controllers, HMI interfaces.
• Comfort level troubleshooting advanced PLC controlled equipment
• Basic understanding of network systems
• Electrical experience with 480V switchgear and controls, 120V and 24V controls.
• Mechanical experience and proficiency in general equipment troubleshooting and repair
• Prior experience with root cause analysis of process failures.
• Preferred 5 to 10 years of experience with all aspects of production plant maintenance.
• Preferred experience within the food manufacturing industry.
• Computer skills preferred: FIXX

COMPETENCIES:

• Analytical - Synthesizes complex or diverse information; Collects and researches data; Uses intuition and experience to complement data; Designs work flows and procedures.
• Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; Commits to long hours of work when necessary to reach goals; Completes tasks on time or notifies appropriate person with an alternate plan.
• Initiative - Volunteers readily; Undertakes self-development activities; Seeks increased responsibilities; Takes independent actions and calculated risks; Looks for and takes advantage of opportunities; Asks for and offers help when needed.
• Judgement - Displays willingness to make decisions; Exhibits sound and accurate judgment; Supports and explains reasoning for decisions; Includes appropriate people in decision-making process; Makes timely decisions.
• Problem Solving - Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics.
• Safety and Security - Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions; Uses equipment and materials properly.

PHYSICAL DEMANDS AND WORK ENVIRONMENT:

WORK ENVIRONMENT:Hours are Monday – Friday, 3:00 am to 11:00 am onsite in Congers, NY with additional days/hours as needed. This is not a hybrid / remote position.

• Plant and laboratory employees cannot have allergies to milk, eggs, tree nuts, peanuts, soy and wheat.
• Continually required to stand and walk.
• Occasionally required to sit.
• Continually required to utilize hand and finger dexterity.
• Continually required to climb, balance, bend, stoop, kneel or crawl.
• Continually required to talk or hear.
• Occasionally required to taste or smell.
• Frequently exposed to wet and/or humid conditions (non-weather).
• Continually works near moving mechanical parts.
• Frequently works in high, precarious places.
• Occasionally works around fumes, airborne particles, or toxic chemicals.
• Frequently exposed to outside weather conditions.
• Occasionally exposed to extreme heat or cold (non-weather).
• Occasionally exposed to bloodborne and airborne pathogens or infectious materials.
• While performing the duties of this job, the noise level in the work environment is usually moderate.
• The employee must frequently lift and/or move up to 100 pounds, following safe lifting procedures.
• Specific vision abilities required by this job include: close vision; distance vision; color vision; peripheral vision; depth perception and ability to adjust focus.
• Specialized equipment, machines, or vehicles used: Maintenance Tools, Pickup Truck, Fork Lift, Scissor lift and other lift devices.

The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Star Kay White is an equal opportunity and E-Verify employer. All qualified applicants will receive consideration for employment without regard to race, color, creed, religion, sex, disability (physical or mental), age, sexual orientation, pregnancy, breastfeeding, gender, gender identity or expression, transgender status, national origin, ancestry, military/veteran status, citizenship status, genetic information, predisposing genetic characteristics, familial or marital status, status as a victim of domestic violence, prior arrest or conviction record, or any other characteristic protected under federal, state, or local law. Star Kay White is committed to providing equal opportunity to individuals with disabilities in employment. Applicants with disabilities may be entitled to reasonable accommodation under the Americans with Disabilities Act, the New York Human Rights Law, or local laws.

Must be 18 years or older to apply.

Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.

Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.

What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.

Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.

Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.

Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

About Us:

Peckham Industries Inc. (PII) has been a family-run business since 1924 and we believe our “family by choice” ethos delivers value as the trusted supplier of construction materials, products, and services in the communities we serve. Through our extensive network of hot mix asphalt and ready-mix concrete plants, quarries, and liquid asphalt terminals, PII delivers the highest quality materials and custom solutions to thousands of road construction and road maintenance customers. In addition, the company’s construction operations include paving and road reclamation services, as well as precast/pre-stressed concrete production and erection of multi-level parking structures, specialty buildings, and bridge components.

Become part of our mission by realizing your purpose, serving our community interests, and delivering growth for our customers. Peckham Industries educates, innovates, and applies technology in a way that is safe, sustainable, inclusive, and profitable.

Job Summary:

The Quality Control Technician plays a critical role in supporting continuous production and ensuring compliance with State, Federal, and local specifications in our Hot Mix Asphalt (HMA), crushed stone, sand and gravel operations. This position requires a mechanically inclined, hands-on individual who is experienced and comfortable working in manual labor environments using tools, equipment, and machinery.

Essential Functions:

1. Protect Family and Friends. Follow all Company Safety Policies and Procedures as well as Occupational Safety and Health Administration (OSHA) regulations and guidelines. Support business activities, objectives, and programs.
2. Mastery. Reliably perform all required HMA materials testing in accordance with the procedures outlined in Peckham Industries' Quality Control Program, with a focus on producing the highest quality product in the most cost-effective manner. Conduct asphalt mix testing such as gradation, asphalt content, volumetrics, and temperature checks, and accurately input results into the QC software program.
3. Ownership and caring. Maintain a strong understanding of asphalt plant production equipment and facility operations to identify, diagnose, and assist in correcting production deficiencies. Collaborate with plant management and equipment operators, maintaining awareness of production and maintenance schedules. Observe and participate in on-site HMA testing, including mat density, temperature, and compaction monitoring.
4. Communicate test results and any quality-related concerns promptly and consistently to plant management to support informed decision-making and continuous quality improvement. Act as a liaison between paving crews, contractors, and dispatch, ensuring smooth communication regarding mix quality and production timelines.
5. Results matter. Document all quality control testing clearly, accurately, and in a timely manner. Maintain a database of daily test results and ensure the testing environment is clean and safe. Ensure that laboratory equipment is properly maintained and in good working order.
6. Respect and engage. Serve as a resource to the sales team, customers, paving crews, and plant management by offering technical support and assistance related to HMA quality and performance. Recommend and assist with adjustments to mix designs or production processes to ensure compliance with job specifications.
7. Dedication. Collect and prepare HMA samples at the plant and job sites in accordance with specification requirements, including loose mix and compacted specimens for quality verification and acceptance testing.
8. Committed to serve. Perform testing of fine and coarse aggregate gradations, asphalt binder properties, and reclaimed asphalt pavement (RAP) materials, increasing testing frequency when materials fall outside of specifications. Maintain inventory of mix additives, fibers, and other specialty materials used in asphalt production.

Requirements, Education and Experience:

1. Degree in construction, engineering, or related fields is preferred.
2. The ideal candidate should currently hold or be willing to obtain a QCT Certification from a NYSDOT or NETTCP accredited program.
3. Experience in Hot Mix Asphalt or a relatable field is encouraged. 3-5 Years of relatable knowledge preferable.
4. Have experience working hands-on in manual labor environments
5. Be comfortable using mechanical tools, equipment, and machinery
6. Have and maintain reliable transportation
7. Proficient literacy in English and computational Math; clear verbal and written communication is required for this position
8. Must be computer literate and comfortable using Word, Excel, and email communications
9. Ability to work irregular hours based upon customer’s needs including day, evenings, overnights, and occasional weekends when business requires.
10. Must have legal right to work in the U.S.

Other Duties:

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Travel:

Extensive travel throughout the serviced region to various plant and work locations by personal vehicle.

Work Environment/Physical Demands:

Medium Work; Exerting up to 50lbs of force occasionally, and/or up to 20lbs of force frequently, and/or up to 10lbs of force constantly to move objects. This position works on or near moving mechanical parts and loud equipment. Requires the ability to sit or stand for long periods of time as well as lifting, bending, kneeling, squatting, climbing, walking, reaching, driving, and repetitive motion.

Values:

At Peckham, you will experience our values wherever you work: corporate offices, plants, quarries, or paving operations. We share a common set of values - safety, integrity, dedication, and efficiency which are embedded in how we show up every day. Ours is a culture where we protect family and friends, our word is our bond, we are committed to serve and results matter. Our values are the foundation of our growth, and we believe we will pave the way for future success.

Peckham Industries, Inc. (PII) is an Equal Employment Opportunity (EEO) and Affirmative Action employer. It is our policy to provide EEO to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, pregnancy or pregnancy-related condition, or any other characteristic protected by federal, state or local law.

Under the Americans with Disabilities Act or similar law, if you have a disability and you wish to discuss potential accommodations related to applying for employment at Peckham, please contact

Compensation details: 24-26 Hourly Wage

PI3d04833ebc

About the Company

At MetroWall, we hold our values close to heart, with respect being the cornerstone of our interactions. We believe that fostering a respectful environment not only enhances collaboration but also drives innovation. Overcoming obstacles is part of our journey, and we view challenges as opportunities to grow and improve. By embracing these challenges, we consistently strive to exceed expectations, delivering exceptional results and setting new standards in our industry. Together, these values create a culture of excellence and continuous improvement. Alignment with these values is critical to the success of any employee at MetroWall.

About the Role

The Engineering Project Manager (EPM) leads product design initiatives and oversees custom engineering solutions. This role focuses on managing new product development, ensuring successful market launches, and handling custom projects in collaboration with R&D, sales, and engineering teams.

Responsibilities

R&D Project Management & Product Launch:

• Lead the planning, execution, and monitoring of product development projects, from concept to market launch, ensuring alignment with business objectives and market needs.
• Collaborate with R&D, production, and sales teams to ensure new products are manufacturable, cost-effective, and innovative.
• Develop project timelines, manage budgets, and allocate resources efficiently to meet project goals.
• Gather and implement feedback from customers and internal teams to refine and improve product designs.
• Assist in go-to-market strategies, including product positioning and promotion plans.

Custom Project Management:

• Collect custom project requests through established sales channels, or capture any that bypass the process, ensuring they are reviewed with R&D before moving forward.
• Once a custom project is confirmed, oversee the handoff to the engineering team and provide guidance as needed to ensure smooth execution.
• Collaborate with R&D to develop innovative solutions for complex custom projects, ensuring the engineering team successfully implements the designs according to plan.

Collaboration & Technical Support:

• Act as the main liaison between sales, R&D, and engineering teams to ensure the seamless execution of both product design and custom projects.
• Provide technical oversight throughout the project lifecycle, from design to production and installation, ensuring alignment with the initial project plan.
• Communicate project status and resolve any technical challenges that arise during execution, working closely with all involved departments.
• Assist internal teams with project specifications and technical guidance, ensuring quality and consistency in both standard and custom solutions.

Qualifications

• Bachelor’s degree in Mechanical Engineering or a closely related field.
• Solid experience in product design, product lifecycle management (PLM), and new product introduction (NPI). Ability to lead and manage the development of new products from concept through to production, ensuring alignment with business objectives and market needs.
• Advanced proficiency in AutoCAD and Autodesk Inventor for creating and modifying detailed design drawings, 3D models, and prototypes.
• Strong verbal and written communication skills for effective collaboration with cross-functional teams, stakeholders, and customers. Ability to clearly convey design concepts and project updates.
• Excellent communication, organizational, and problem-solving skills
• Highly organized, capable of managing multiple projects and tasks efficiently. Adept at troubleshooting design challenges and implementing effective solutions quickly.
• A meticulous approach to design work, ensuring precision and accuracy throughout the product development process.
• PMP (Project Management Professional) certification preferred.

Work Environment

• Office and Field

Additional Responsibilities

• Work willingly with all members of the team to foster a collaborative and innovative work environment.
• Stay informed on industry trends, emerging technologies, and competitive products to drive continuous improvement and innovation.

Equal Opportunity Statement

MetroWall is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, color, creed, religion, national origin, ancestry, citizenship status, age, sex or gender (including pregnancy, childbirth, pregnancy-related conditions, and lactation), gender identity or expression (including transgender status), sexual orientation, marital status, military service and veteran status, physical or mental disability, genetic information, or any other characteristic protected by applicable federal, state, or local laws and ordinances. MetroWall's management team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities, access to facilities and programs, and general treatment during employment.