Engineering Jobs in Manchaca Travis County Tx Remote

Job Title: Principal Electrical Controls Engineer

Job Family: Electrical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.

This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.

What will you do?

- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.

- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.

- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.

- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.

- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.

- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.

- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.

- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.

- Drive the development of system-level simulations and digital twins to validate control strategies before deployment

- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools

- Establish design patterns and best practices for modular and reusable control logic across projects

- Lead root cause analysis and resolution of complex control system issues during commissioning and operations

- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency

- Develop and maintain documentation for system architecture, control logic, and operational procedures

- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure

- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints

- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines

- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems

How will you get here?

Education:

- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.

Experience:

- 8+ years pf experience in control system design and implementation

- Deep expertise in the following:

- PLC programming (Allen-Bradley, Siemens, Schneider Electric)

- Building Management Systems (BMS) integration and optimization

- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics

- Automatic Transfer Switches (ATS) control and failover logic

- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)

- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)

- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills

- Creative, self-motivated, accountable, and team-oriented

- Able to work independently with minimal oversight as part of a global team

- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

- Skilled in writing reports, business correspondence, and procedural guides

- Effective at presenting information and responding to management, clients, and public queries

- Capable of influencing others and sharing best practices while mentoring less experienced engineers

- Capable of assessing projects, articulating risks, and developing project milestones

- Familiar with stage-gate processes in project lifecycle management (PLCM)

- Excellent problem-solving skills and attention to detail

- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus

- Experience with hyperscale or colocation data center environments

- Familiarity with low and medium-voltage systems

Preferred Qualifications: 

- Master’s Degree in Electrical Engineering or a relevant engineering discipline

- Active Professional Engineer (PE) license

- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.

- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.

Senior Manager, Manufacturing Test Development - based onsite in Austin, TX or Remote US.

Jabil is seeking a Senior Manager, Manufacturing Test Development for our Austin, TX location who will directly contribute to the transformative growth within our Intelligent Infrastructure division by applying unique and innovative approaches to developing end customer product solutions.

You will be responsible for managing the technical direction of Rack scale test software and integration development programs through the lens of the customer, factory, and services. You will also be responsible for partnering and collaborating with Hyperscale & AI customers, strategic suppliers, internal engineering, product management, program management, manufacturing, test and quality teams to ensure your products meet the rigorous standards and performance expectations of Jabil’s world-class manufacturing environments and our customers.

What can you expect to do?

LEADERSHIP RESPONSIBILITIES

- Responsible for ensuring the delivery of all manufacturing test solutions for new and sustaining programs for rack-scale AI/ML and GPGPU and hardware accelerator-based server and storage platforms.

- Accountable for all onsite customer delivery commissioning tests as an extension of the manufacturing test capability.

- Strong ability to organize teams and drive the solution for multiple, complex problems cross-functionally and within various areas of technical expertise (hardware, software, firmware, performance, interoperability, etc.)

- Charged with ensuring the right level of execution discipline and engineering rigor is applied to all technical program deliverables – must lead by example.

- Empowered to make key decisions with respect to quality and features that may impact customer experience.

- Capable of influencing individuals, teams and executives to the level necessary to support delivery of programs within schedule, scope and budget boundaries.

- Able to understand how technical decisions impact the broader business, factories and customers and use these insights to lead the broader organization to optimized outcomes.

- Must be extremely detailed oriented while at the same time able to communicate complex issues in simple, actionable terms at all levels within the organization.

- Must possess a strong balance of technical skills, experience-based judgment and business acumen in all execution and decision-making activities.

- Strong ability to develop, grow and maintain healthy interpersonal relationships with peers, team members, executive leadership, customers and external partners at all times.

- Provide thought leadership and direct engineering support to multiple manufacturing sites in the areas of product, component and supplier expertise.

- Exchange knowledge and information with other Jabil facilities to ensure best practices are both shared and implemented throughout the Jabil organization.

- Guide technical and operational teams towards the successful resolution of complex and/or systemic product, process and material issues through the application of rigorous analytical methods.

- Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines).

FUNCTIONAL RESPONSIBILITIES

- Primary technical interface for manufacturing rack test development efforts from concept through delivery.

- Own driving resolution of all issues regarding test solutions aligned with critical path.

- Reviewer and approver of technical risks, and contingency/mitigation plans.

- Can review and provide input to material plans, test plans, test reports, lessons learned.

- Owns preventative actions so gaps in E2E process or capability are addressed long-term.

- Accountable for managing manufacturing technical and quality excursions through indirect coordination and hands-on engineering analysis as it pertains to your test deliverables.

- Provide technical and product subject matter expertise to the factories and customers.

- Lead highly technical and innovative RFI/RFQ responses supporting new strategic and recurring business opportunities.

KNOWLEDGE REQUIREMENTS

- Strong technical program management skills. Able to lead and direct a broad cross-functional global team.

- Exceptional knowledge and experience regarding product development processes and tools.

- Experience and deep level of understanding of server, storage, networking and GPGPU and PCIe-based accelerator architectures.

- Working knowledge of OS, driver, firmware and hardware architecture, device interactions and ability to leverage expertise to determine root cause that lead to optimized solutions.

- Deep experience in process development and process improvement. Able to lead the development of complex processes spanning multiple functions and areas of expertise.

What is the experience needed to be successful in this role?

- BS degree in Electrical/Computer Engineering, Computer Science or related field is required; MS is preferred.

- 8+ years' experience in a software or hardware product development environment with enterprise server, storage or networking products is required.

- Excellent verbal and written communication skills.

- Prior experience directly or indirectly managing engineering and/or development teams.

- Experience managing remote, multi-national and geographically dispersed development teams.

- Domestic and/or international travel, up to 30%, may be required.

Benefits Package with Jabil

Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:

- Competitive Base Salary
- Annual Bonus
- Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
- 401K Match
- Employee Stock Purchase Plan
- Paid Time Off
- Tuition Reimbursement
- Life, AD&D, and Disability Insurance
- Commuter Benefits
- Employee Assistance Program
- Pet Insurance
- Adoption Assistance
- Annual Merit Increases
- Community Volunteer Opportunities

Job Title: Principal Electrical Controls Engineer

Job Family: Electrical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.

This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.

What will you do?

- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.

- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.

- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.

- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.

- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.

- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.

- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.

- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.

- Drive the development of system-level simulations and digital twins to validate control strategies before deployment

- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools

- Establish design patterns and best practices for modular and reusable control logic across projects

- Lead root cause analysis and resolution of complex control system issues during commissioning and operations

- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency

- Develop and maintain documentation for system architecture, control logic, and operational procedures

- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure

- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints

- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines

- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems

How will you get here?

Education:

- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.

Experience:

- 8+ years pf experience in control system design and implementation

- Deep expertise in the following:

- PLC programming (Allen-Bradley, Siemens, Schneider Electric)

- Building Management Systems (BMS) integration and optimization

- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics

- Automatic Transfer Switches (ATS) control and failover logic

- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)

- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)

- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills

- Creative, self-motivated, accountable, and team-oriented

- Able to work independently with minimal oversight as part of a global team

- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

- Skilled in writing reports, business correspondence, and procedural guides

- Effective at presenting information and responding to management, clients, and public queries

- Capable of influencing others and sharing best practices while mentoring less experienced engineers

- Capable of assessing projects, articulating risks, and developing project milestones

- Familiar with stage-gate processes in project lifecycle management (PLCM)

- Excellent problem-solving skills and attention to detail

- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus

- Experience with hyperscale or colocation data center environments

- Familiarity with low and medium-voltage systems

Preferred Qualifications: 

- Master’s Degree in Electrical Engineering or a relevant engineering discipline

- Active Professional Engineer (PE) license

- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.

- Experience with digital twin modeling and predictive maintenance strategies.

**This position supports hybrid work schedule depending on organization needs.**

How will you make an impact?

We are looking for a Principal Thermal Rack Engineer within the Intelligent Infrastructure Segment to drive advanced cooling solutions for high-performance computing systems. This role involves incorporating thermal components such as direct liquid cooling (DLC) systems, coolant distribution units (CDUs), and manifolds into network and server racks (EIA 19” and ORv3). You will leverage CFD tools to perform rack and system-level thermal and fluid analysis, ensuring optimal flow distribution, pressure drop, and temperature performance. Additionally, you will create 3D CAD designs for seamless hardware integration, lead validation testing, and resolve thermal or flow issues through root cause analysis and corrective actions. Collaboration with cross-functional teams, customers, and global vendors is essential to align thermal architectures with overall system design and international standards.

What will you do?

- Lead the end-to-end integration and testing of rack thermal solutions, including liquid cooling systems in varying form factors and product lines.
- Use CFD tools (FloTherm or Macroflow) to perform switch, rack, and system-level thermal/fluid analysis (flow distribution, pressure drop, and temperature profiling).
- Design and optimize thermal components using 3D CAD (Creo or SolidWorks) to support seamless hardware integration and testing.
- Participate in customer engagements and site visits to understand and document deployment constraints and gather feedback for design improvements.
- Partner with factory teams to ensure racks are built with proper airflow, hose routing, and thermal safeguards, while establishing best practices that improve build consistency across deployments.
- Collaborate with Architects/Compliance/Reliability and global vendors to align thermal architectures with total system design and international data center/thermal/mechanical standards (e.g., UL, OCP, ASHRAE, ISTA, ASTM, NEBS).
- Conduct thermal, mechanical, and reliability testing, analyzing airflow, coolant flow rates, pressure drops, and structural integrity to ensure compliance with the end-users’ specifications.
- Develop and maintain design documentation including BOMs, wetted materials compliance, test plans, and engineering change orders (ECOs).
- Manage relationships with mechanical/thermal component vendors to build out a robust partner ecosystem consisting of racks, CDUs, hoses, manifolds, QDs, and cold plates.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (e.g., in-row cooling, in-rack cooling, rear door heat exchangers).
- Conduct root cause analysis and corrective actions for mechanical and thermal failures or field issues.
- May perform other duties and responsibilities as assigned.

How will you get here?

Education:

- Bachelor’s Degree in Mechanical/Thermal Engineering, Systems Engineering, or related field is required

Experience:

- Minimum of 7+ years of experience in thermal/mechanical systems integration
- 3+ years of specific experience in rack-scale thermal design and analysis
- Strong understanding of mechanical systems, integration strategies, and large-scale program management
- Familiarity with server design, heatsinks, cold plates, hoses, and blind-mate connectors
- Proficiency in CFD simulation (e.g. ANSYS, 6Sigma, etc.) and 3D modeling software (e.g. SolidWorks, Creo)
- Hands-on experience with thermal chambers, fans, and coolant
- Excellent English communication skills (verbal and written) with strong technical leadership capabilities

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Capable of assessing projects, articulating risks, and developing project milestones
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management and customers
- Capable of influencing others and sharing best practices
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Ability to travel both domestically and internationally up to 30%

Preferred Qualifications: 

- Master’s Degree in Mechanical Engineering, Systems Engineering or related field is preferred
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license preferred.
- Hands-on experience with prototype fabrication and testing; experience working with global suppliers and contract manufacturers a plus.

About Jabil’s Intelligent Infrastructure Group:

- Headquartered in Austin, TX, with a flagship facility located near The Domain and the Austin FC stadium
- Growing rapidly, with a team of more than 100 employees in Austin (500+ worldwide) and significant expansion planned through 2026
- Generated over $12 billion in FY25 revenue, driven largely by partnerships with major hyperscale customers
- Delivers cutting‑edge engineering, supply chain, and manufacturing solutions that power the world's AI infrastructure and global data center ecosystems

As part of the total rewards package, this position is eligible for:

- Annual bonus opportunity
- Medical, dental, and vision insurance plans
- Paid time off (PTO)
- 4 weeks of paid parental leave
- 11 company-paid holidays (9 fixed holidays and 2 optional floating holidays), subject to change yearly
- 401(k) retirement plan
- Employee stock purchase plan

Job Title: Sr. Principal Electrical Design Engineer

Job Family:  Electrical Design Engineering

Organization : Data Center Infrastructure Team

Location:  Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

Jabil has an exciting opportunity for a highly experienced and technically proficient Principal Electrical Engineer to engage in the design, fabrication, and integration of electrical systems for data center power and cooling products, as well as factory enablement projects. This role includes full-stack electrical design from generator systems to AI rack integration zones, with a focus on PDUs, UPS systems, MV/HV power distribution, phased power infrastructure, and controls architecture. The ideal candidate will bring deep technical expertise and a passion for delivering scalable, reliable, and compliant infrastructure solutions.

The Sr. Principal Electrical Integration Engineer will manage and oversee the electrical systems essential for the data center, energy storage systems, and HVAC applications. This role will involve developing specifications, selecting key components, routing wires and cables, establishing connections, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.

What will you do?

Product & System Design :

• Knowledge of high-efficiency power conversion and point-of-load regulation for AI/ML server racks (BBU, rPDU).
• Understanding of rack power zoning, load balancing, and redundancy strategies for tiered compute workloads.
• Ensure electrical systems are properly integrated into fabricated enclosures and structural assemblies.
• Lead the electrical design and integration of UPS systems, power conversion units, and safety interlocks.
• Develop and maintain single-line and three-line diagrams for power distribution systems, ensuring clarity, accuracy, and compliance with NEC, IEEE, and UL standards.
• Design and validate three-phase power systems, including load balancing, fault protection, and redundancy strategies for high-availability environments.
• Engineer and integrate medium-voltage (MV) and high-voltage (HV) power distribution components such as switchgear, transformers, busways, and protective relays.
• Specify and qualify electrical components including circuit breakers, contactors, CTs/PTs, surge protection devices, isolation switches for MV/HV applications and the design and development of wiring harnesses

Factory & Facility Integration :

• Design end-to-end electrical distribution systems from generator and utility interface to AI rack integration zones.
• Coordinate with cross functional teams to ensure electrical infrastructure aligns with facility layout, safety codes, and operational requirements.
• Plan and implement power redundancy, load segmentation, and scalable distribution architectures to support high-density compute environments.
• Ensure proper grounding, EMI shielding, and thermal management across all facility-level electrical systems.

Fabrication & Implementation :

• Define fabrication processes including panel building, cable routing, and system integration, ensuring manufacturability and serviceability.
• Perform electrical load calculations, short-circuit analysis, arc flash studies, and thermal modeling using tools such as ETAP, SKM PowerTools, or EasyPower.
• Lead design reviews, risk assessments, and validation testing to ensure compliance with UL, IEC, NEC, CE, RoHS, and REACH standards.
• Interface with suppliers and customers resolve fabrication and quality issues, and ensure adherence to specifications.
• Support prototype builds, field deployments, and customer engagements to gather feedback and refine designs.

Controls Architecture :

• Develop and implement electrical controls architecture for power and cooling systems, including PLCs, SCADA integration, and remote monitoring capabilities.
• Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
• Collaborate with software and automation teams to ensure seamless integration of control systems with facility and product-level infrastructure.
• Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.

Leadership & Documentation :

• Develop and maintain engineering documentation including BOMs, test procedures, and engineering change orders (ECOs).
• Mentor junior engineers and provide technical leadership across cross-functional teams.
• Drive continuous improvement initiatives focused on cost reduction, design for manufacturability (DFM), and product scalability

How will you get here? 

Education :

• Bachelor’s Degree in Electrical Engineering or related engineering discipline.

Experience :

• 10+ years of experience in electrical design and fabrication, with a focus on data center or industrial power systems
• Proficiency in ECAD tools (AutoCAD Electrical, EPLAN, SolidWorks Electrical) and integration with mechanical CAD platforms
• Strong understanding of MV/HV power distribution, lithium-ion UPS systems, and three-phase electrical infrastructure
• Experience with electrical analysis tools (ETAP, SKM PowerTools, EasyPower)
• Proven experience in facility-level electrical design and construction support and Excellent leadership, communication, and cross-functional collaboration skills

Knowledge, Skills, Abilities:

• Excellent interpersonal and communication skills
• Creative, self-motivated, accountable, and team-oriented
• Able to work independently with minimal oversight as part of a global team
• Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
• Skilled in writing reports, business correspondence, and procedural guides
• Effective at presenting information and responding to management, clients, and public queries
• Capable of influencing others and sharing best practices while mentoring less experienced engineers
• Capable of assessing projects, articulating risks, and developing project milestones
• Familiar with stage-gate processes in project lifecycle management (PLCM)
• Excellent problem-solving skills and attention to detail

Preferred Qualifications:  

• Master’s Degree in Electrical Engineering
• Active Professional Engineer (PE) license
• Experience with data center infrastructure: UPS systems, switchgear, CRAC units, and PDUs
• Familiarity with global compliance standards: UL, CE, RoHS, REACH, and IEEE.
• Hands-on experience with panel fabrication, wiring, and system integration
• Knowledge of thermal and mechanical constraints in electrical enclosure design and experience working with global suppliers and contract manufacturers
• Experience in WindChill and DevOps

Remote working/work at home options are available for this role.

Are you a detail-oriented individual with a passion for research and a good understanding of national and local geography? This freelance opportunity allows you to work at your own pace and from the comfort of your own home.

A Day in the Life of an Online Data Analyst:

• In this role, you will be working on a project aimed at enhancing the content and quality of digital maps that are used by millions of people worldwide
• Completing research and evaluation tasks in a web-based environment such as verifying and comparing data, and determining the relevance and accuracy of information.

Join us today and be part of a dynamic and innovative team that is making a difference in the world!

TELUS Digital AI Community

Our global AI Community is a vibrant network of 1 million+ contributors from diverse backgrounds who help our customers collect, enhance, train, translate, and localize content to build better AI models. Become part of our growing community and make an impact supporting the machine learning models of some of the world’s largest brands

Qualification path

No previous professional experience is required to apply to this role, however, working on this project will require you to pass the basic requirements and go through a standard assessment process. This is a part-time long-term project and your work will be subject to our standard quality assurance checks during the term of this agreement. 

Basic Requirements

• Full Professional Proficiency in Spanish language
• Being a resident in United States for the last 2 consecutive years and having familiarity with current and historical business, media, sport, news, social media, and cultural affairs in United States
• Ability to follow guidelines and conduct online research using search engines, online maps, and website information
• Flexibility to work across a diverse set of task types, including maps, news, audio tasks, and relevance
• Daily access to a broadband internet connection, computer, and relevant software

Assessment

In order to be hired into the program, you’ll take an open book qualification exam that will determine your suitability for the position and complete ID verification. Our team will provide you with guidelines and learning materials before your qualification exam. You will be required to complete the exam in a specific timeframe but at your convenience.

Equal Opportunity

All qualified applicants will receive consideration for a contractual relationship without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. At TELUS Digital AI, we are proud to offer equal opportunities and are committed to creating a diverse and inclusive community. All aspects of selection are based on applicants’ qualifications, merits, competence, and performance without regard to any characteristic related to diversity.

Remote working/work at home options are available for this role.

Are you a detail-oriented individual with a passion for research and a good understanding of national and local geography? This freelance opportunity allows you to work at your own pace and from the comfort of your own home.

A Day in the Life of an Online Data Analyst:

• In this role, you will be working on a project aimed at enhancing the content and quality of digital maps that are used by millions of people worldwide
• Completing research and evaluation tasks in a web-based environment such as verifying and comparing data, and determining the relevance and accuracy of information.

Join us today and be part of a dynamic and innovative team that is making a difference in the world!

TELUS Digital AI Community

Our global AI Community is a vibrant network of 1 million+ contributors from diverse backgrounds who help our customers collect, enhance, train, translate, and localize content to build better AI models. Become part of our growing community and make an impact supporting the machine learning models of some of the world’s largest brands. 

Qualification path

No previous professional experience is required to apply to this role, however, working on this project will require you to pass the basic requirements and go through a standard assessment process. This is a part-time long-term project and your work will be subject to our standard quality assurance checks during the term of this agreement. 

Basic Requirements

• Full Professional Proficiency in Bengali and English language
• Being a resident in The United States or the last 2 consecutive years and having familiarity with current and historical business, media, sport, news, social media, and cultural affairs in India
• Ability to follow guidelines and conduct online research using search engines, online maps, and website information
• Flexibility to work across a diverse set of task types, including maps, news, audio tasks, and relevance
• Daily access to a broadband internet connection, computer, and relevant software

Assessment

In order to be hired into the program, you’ll take an open book qualification exam that will determine your suitability for the position and complete ID verification. Our team will provide you with guidelines and learning materials before your qualification exam. You will be required to complete the exam in a specific timeframe but at your convenience.

Equal Opportunity

All qualified applicants will receive consideration for a contractual relationship without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. At TELUS Digital AI, we are proud to offer equal opportunities and are committed to creating a diverse and inclusive community. All aspects of selection are based on applicants’ qualifications, merits, competence, and performance without regard to any characteristic related to diversity.

Remote working/work at home options are available for this role.

Lead Product Owner – QNXT Modernization

Location: Remote
Employment Type: Full-Time

Job ID:

About the role

As a Lead Product Owner – QNXT Modernization, you will make an impact by shaping and driving the modernization roadmap for QNXT architecture and operational capabilities. You will be a key contributor within our product organization, working closely with cross‑functional teams—including Product Management, Architecture, DevOps, Engineering, and Consulting—to translate business strategy into actionable product outcomes.

In this leadership role, you will represent the voice of the end user, influence technical and business decisions, and empower Agile teams to deliver high‑value, high‑quality solutions for healthcare payer clients.

In this role, you will:

• Lead and collaborate with peers to define the modernization roadmap for QNXT, ensuring alignment with business use cases and strategic objectives.
• Apply strong technical and business acumen to guide and support multi‑functional teams throughout the product lifecycle.
• Serve as an Agile Product Owner leader, partnering closely with Product Management and technical stakeholders to define and align requirements with customer and internal expectations.
• Act as the voice of the end user, focusing Agile delivery teams on achieving outcomes—not just completing tasks.
• Own and manage the product backlog, refine future deliverables, and adjust the overall product roadmap based on evolving business needs.
• Translate business and technical strategies into execution‑ready user stories, acceptance criteria, and product definitions.
• Clearly articulate team goals, priorities, and product strategy to stakeholders and team members.
• Provide continuous feedback on in‑progress work, clarify requirements, and help remove impediments to maintain momentum.
• Review team deliverables for completeness, quality, and long‑term supportability.
• Collaborate with leadership to determine resource needs required to achieve product goals.
• Foster a collaborative, inclusive team culture that encourages innovation, continuous improvement, and self‑organization.
• Mentor Product Owners, Architects, and Engineers, providing guidance and support to strengthen team capability.
• Influence leadership decisions using strong communication, problem‑solving, and stakeholder engagement skills.
• Support a culture of continuous learning, development, and knowledge sharing across teams.

Work model:

We believe hybrid work is the way forward as we strive to provide flexibility wherever possible. Based on this role’s business requirements, this is a hybrid position requiring regular presence in Mesa, AZ. Regardless of working arrangement, we support a healthy work–life balance through our wellbeing programs.

Working arrangements are accurate as of the posting date and may change based on business or client needs.

What you need to have to be considered

• Bachelor’s degree in Healthcare Sciences, Computer Science, or a related field (post‑graduate degree a plus).
• 5–6 years of experience in software development, architecture delivery, or technical product ownership.
• 5–6 years of experience motivating and influencing technical or business teams as a lead.
• 5–6 years of experience within the healthcare payer industry.
• Strong servant leadership approach, with the ability to inspire teams and drive meaningful outcomes.
• Proven ability to translate technical goals and architectural strategies into business and operational value.
• Strong communication, collaboration, and stakeholder‑management skills.
• Deep understanding of Agile principles, methodologies, and practices.

These will help you stand out:

• Experience with SAFe or other scaled Agile frameworks.
• Experience using Agile tools such as Azure DevOps.
• Prior experience in healthcare payer administration or healthcare software development.
• Experience working with Product Owners across multiple teams.
• Knowledge of QNXT or similar healthcare administration platforms.
• Experience or familiarity with:
  • Azure services / infrastructure
  • .NET, C#, ASP.NET, Angular
  • MS SQL
  • Kafka / AMQP
  • Cloud PaaS / SaaS solutions
  • Kubernetes, Docker, Terraform
  • Large‑scale system architecture (full‑stack supportability)
  • Identity & Access Management (OIDC)
  • REST APIs, microservices
  • CI/CD automation
• Strong analytical and critical‐thinking abilities, with the ability to guide teams toward solving complex problems.
• Ability to coach and influence in multicultural and cross‑functional environments.

Salary and Other Compensation:

Applicants will be accepted till 3/20/2026

Cognizant will only consider applicants for this position who are legally authorized to work in the United States without company sponsorship.

*Please note, this role is not able to offer visa transfer or sponsorship now or in the future*

The annual salary for this position will be in the range of $113K-$132K depending on experience and other qualifications of the successful candidate.

This position is also eligible for Cognizant’s discretionary annual incentive program, based on performance and subject to the terms of Cognizant’s applicable plans.

Benefits: Cognizant offers the following benefits for this position, subject to applicable eligibility requirements:

• Medical/Dental/Vision/Life Insurance
• Paid holidays plus Paid Time Off
• 401(k) plan and contributions
• Long-term/Short-term Disability
• Paid Parental Leave
• Employee Stock Purchase Plan

Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. Cognizant reserves the right to modify this information at any time, subject to applicable law.

Our strength is built on our ability to work together. Our diverse backgrounds offer different perspectives and new ways of thinking. It encourages lively discussions, creativity, productivity, and helps us build better solutions for our clients. We want someone who thrives in this setting and is inspired to craft meaningful solutions through true collaboration.

If you are content with ambiguity, excited by change, and excel through autonomy, we’d love to hear from you!

Apply Now!

#LI-IK1

CogWW901

Remote working/work at home options are available for this role.

Job Title : GIS Specialist (Hybrid/Exp in utilities/oil/gas/power Industry preferred)

Job Description :

Seeking a GIS Analyst that will develop an understanding of current data state, workflows and processes and develop solutions for integrations, transformations, and deliverables.

This will include GIS data analysis, data mining, technical support, and database maintenance to meet internal and external customer requirements.

• Requires demonstrated ability to solve complex problems and recommend the best track for data development and processing.
• Project work will involve process improvement, quality control, data creation from spatial and tabular sources, conversion, migration, and maintenance.
• Bachelor’s degree in geography (GIS), engineering, computer science, or related field and 3+ years experience in industry standard GIS.
• GIS certificate and 3 years of related work experience in lieu of a degree in related discipline
• 1+ years in a utility or pipeline GIS

Job Responsibilities:

• Proficiency with linear referencing techniques and concepts is highly recommended
• Knowledge of the Utility and Pipeline Data model (UPDM) is highly recommended.
• Technical project tasks, including database design, advanced GIS analysis and modeling
• Performs data mining activities to meet customer requirements/specifications
• Provides specialized queries, maps and reports to meet customer requirements/specifications
• Performs application testing and documentation of defects
• Interfaces with users; documents requested/needed changes
• Identifies new GIS technologies/processes/applications to improve inter-/intra- departmental functions
• Creates and maintains existing automated processes using Model Builder/Python scripting or other tools
• Processes, prepares and converts data to enter into GIS from a variety of data formats •
• Analyzes current business processes and recommends best practice solutions • Perform QA/QC on version data that pushes to the production environment Knowledge, Skills & Abilities
• Esri ArcGIS Pro – advanced proficiency
• Esri ArcGIS 10.2x – advanced proficiency
• Linear referencing - advanced proficiency
• MS Office suite (Access, Excel, Word, PowerPoint, Visio) – advanced proficiency
• FME by Safe Software – intermediate proficiency
• Esri ArcGIS Enterprise – intermediate proficiency
• Utility Network – intermediate proficiency
• Model Builder – intermediate proficiency
• Python – intermediate proficiency
• SQL RDBMS – intermediate proficiency
• AutoCAD/CADD – basic proficiency
• Visual Basic/VBA – basic proficiency
• SharePoint – basic proficiency
• Excellent verbal and written communication skills
• Excellent geoprocessing and spatial analysis skills
• Strong requirements review, analytical, and problem solving skills
• Application testing script development and performance of testing
• Ability to quickly learn and apply new technologies
• Ability to function independently and as a team member
• Ability to handle multiple assignments and changing priorities •
• Ability to work effectively with limited direct supervision Travel (Up to...): 5%

Remote working/work at home options are available for this role.

Assistant Project Manager

Construction | Chicago, IL | Hybrid Flexibility

A globally recognized Architecture, Engineering, and Construction firm is seeking an Assistant Project Manager to join their downtown Chicago office. This firm delivers complex, high profile projects across the United States and internationally, with a diverse portfolio including industrial, residential, commercial, education/public, mixed use, and hospitality developments valued up to $200M+.

This role offers the opportunity to support the delivery of large scale projects while working within a fully integrated AEC delivery model alongside architecture, engineering, and construction teams.

The Opportunity

• The Assistant Project Manager will support senior project leadership in the planning and execution of construction projects from preconstruction through completion. This role will assist with coordination across project teams, consultants, subcontractors, and clients to ensure projects are delivered safely, on schedule, and within budget.
• You will gain exposure to complex projects across multiple sectors while developing your leadership and project management capabilities within a collaborative AEC environment.

Key Responsibilities

• Support the planning and execution of construction projects valued up to $200M+.
• Assist in managing projects from preconstruction through project closeout.
• Coordinate with project managers, superintendents, project engineers, and subcontractors to maintain project progress.
• Work closely with internal architectural and engineering teams within the integrated AEC environment.
• Assist with project financial tracking including budgets, cost reporting, forecasting, and change management.
• Help maintain project schedules, documentation, and reporting.
• Support communication between clients, consultants, subcontractors, and internal teams.
• Participate in project meetings and assist in tracking action items and deliverables.
• Ensure project documentation complies with safety standards, contractual requirements, and company procedures.

Qualifications

• 2 to 6 years of construction project management experience.
• Experience supporting commercial, mixed use, residential, industrial, hospitality, or institutional construction projects preferred.
• Exposure to projects valued $10M to $100M+.
• Strong organizational and coordination skills.
• Ability to support project financials, schedules, and documentation.
• Excellent communication and teamwork capabilities.
• Bachelor’s degree in Construction Management, Engineering, Architecture, or related field preferred.

Why Join

• Globally respected Architecture, Engineering, and Construction firm with an international project portfolio.
• Opportunity to work on complex projects across multiple sectors.
• Strong mentorship and career progression toward Project Manager and Senior Project Manager roles.
• Collaborative environment working alongside architecture and engineering teams in an integrated delivery model.
• Downtown Chicago office with a hybrid work schedule with 2 days work from home.

Remote working/work at home options are available for this role.