Engineering Jobs in Lake Illinois
21 positions found — Page 2
A
Construction Manager – API Expansion
Salary not disclosed
Construction Manager
Location: Lake County, IL (on-site)
Employment Type: Contract (potential for long duration through construction, commissioning, and turnover)
Position Summary
ASI is seeking an experienced Construction Manager to support a major API manufacturing expansion at a large, highly regulated pharmaceutical campus in Lake County, IL. This role is the on-site leader responsible for day-to-day execution: coordinating contractors and trades, enforcing safety and quality expectations, aligning field activities with the Architect/Engineer (A&E) and client stakeholders, and driving timely installation of API synthesis equipment, utilities, and facility systems in an active manufacturing environment.
Key Responsibilities
Field Execution & Trade Coordination
- Direct and coordinate daily work activities for multiple subcontractors/trades (civil, structural, architectural, mechanical/HVAC, piping, electrical, controls, fire protection, insulation, etc.).
- Lead field planning: workface planning, daily/weekly look-ahead, constraint removal, and sequencing to maintain productivity and schedule.
- Verify field readiness (access, permits, drawings, materials, LOTO boundaries, etc.) and keep crews working efficiently.
Safety Leadership
- Champion a strong safety culture consistent with client and contractor programs (OSHA/site rules).
- Conduct job hazard analyses (JHAs), pre-task plans, toolbox talks, and field safety audits; stop work when conditions are unsafe.
- Coordinate safe work in operating areas (permits, hot work, line break, confined space, energized work, LOTO).
Construction Quality & Technical Oversight
- Ensure construction is executed per drawings, specifications, codes/standards, and approved submittals.
- Review/verify installation quality for process equipment and GMP utilities (e.g., purified water, clean steam, process gases, vacuum, chilled water/steam/condensate, wastewater/neutralization—project dependent).
- Support punchlist management, deficiency resolution, and field verification/inspection readiness.
Interface Management (Owner / A&E / Contractors)
- Coordinate construction execution with the A&E team: field design clarifications, constructability issues, and redlines/as-builts.
- Participate in coordination meetings, pull planning sessions, and progress reporting (schedule updates, constraint logs, productivity blockers).
- Communicate clearly and early when scope, schedule, access, or design constraints threaten field progress.
Equipment & Package Expediting
- Track critical equipment/package readiness (FAT/SAT support as required, delivery schedules, staging, rigging plans, installation prerequisites).
- Coordinate receiving, laydown, preservation, and turnover documentation for API synthesis equipment and supporting systems.
Turnover, Commissioning Support & Documentation
- Drive system walkdowns and turnover boundaries (systems/areas), supporting mechanical completion packages and turnover to commissioning/CQV.
- Coordinate vendor support in the field (start-up oversight, issue resolution, closeout).
- Maintain accurate field records: daily reports, installed quantities, progress photos, redlines, punch list status, and turnover artifacts.
Required Qualifications
- 5+ years of on-site construction field engineering/supervision experience in pharma, biotech, chemical process, or other regulated industrial environments.
- Demonstrated experience coordinating multiple trades and contractors on fast-moving projects.
- Working knowledge of GMP/GDP expectations for construction in/near regulated manufacturing areas (material control, cleanliness, change control awareness, turnover discipline).
- Strong safety mindset and familiarity with typical industrial permit-to-work processes.
Preferred Qualifications
- Experience with API chemical synthesis facilities and/or process equipment installation (reactors, filter/dryers, centrifuges, solvent handling, contained transfer, etc.).
- Familiarity with ISPE Baseline concepts, ASTM E2500 mindset, commissioning/qualification interfaces, and turnover best practices.
- Experience working on projects involving advanced manufacturing/automation integrations (PCS/DCS/DeltaV/PLC/SCADA—platform varies by site).
Skills & Attributes
- High field presence: proactive, decisive, calm under pressure, strong situational awareness.
- Strong coordination and documentation habits (punch lists, turnover packages, daily reports).
- Ability to communicate effectively with trades, project management, engineering, quality, EHS, and operations.
- Bias for action: removes blockers, escalates appropriately, and keeps the schedule moving.
Not Specified
M
Sr Supply Chain Analyst
Salary not disclosed
Job Summary Participate in designing solutions related to demand planning, inventory management, procurement, supply chain and operations network planning to support a growing business.
Working with our internal customers to identify needs, define and frame issues and develop detailed project plans.
Job Description Support supply chain planning and purchasing execution processes managed within ERP and advanced planning systems.
Develop processes to govern and validate supply chain relevant data.
Build KPIs to track their impact.
Analyze and manage inputs to supply chain systems to optimize service and financial supply chain metrics.
Develop reporting to aid in supply chain planning and purchasing execution activities.
Analyze business processes to identify improvement opportunities through available technology or process redesign.
Enable data-driven decision making.
Provide documentation of business requirements to IT teams for system and/or reporting enhancements where necessary.
Serve as a liaison to IT in the development of new reporting and system functionality.
Manage project plans on impactful supply chain improvement initiatives and coordinate resources for successful completion.
Minimum Qualifications: Education Bachelor’s degree in Industrial Engineering, Business, Finance, Accounting, Information Systems, Mathematics or Applied Science.
Work Experience At least 4 years of manufacturing operations and/or inventory management experience.
Experience communicating to groups of managers, clients, customers, vendors, senior managers and the general public.
Demonstrated experience working on improvement or analysis initiatives.
Knowledge/Skills/Abilities Advanced skill level in Microsoft Excel.
Intermediate skill level in Microsoft Access.
Basic understanding of SQL or a similar coding language.
Experience developing reporting in or utilizing advanced Business Intelligence tools to query data – e.g.
Tableau, Business Objects, Composite Studio, MicroStrategy, PowerBI, etc.
Experience applying standard financial, accounting and business problem-solving skills to business problems.
Preferred Qualifications: Work Experience APICS CPIMor CSCP Six Sigma Green Belt Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $85,000.00
- $128,000.00 Annual The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
This role is bonus and/or incentive eligible.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
Working with our internal customers to identify needs, define and frame issues and develop detailed project plans.
Job Description Support supply chain planning and purchasing execution processes managed within ERP and advanced planning systems.
Develop processes to govern and validate supply chain relevant data.
Build KPIs to track their impact.
Analyze and manage inputs to supply chain systems to optimize service and financial supply chain metrics.
Develop reporting to aid in supply chain planning and purchasing execution activities.
Analyze business processes to identify improvement opportunities through available technology or process redesign.
Enable data-driven decision making.
Provide documentation of business requirements to IT teams for system and/or reporting enhancements where necessary.
Serve as a liaison to IT in the development of new reporting and system functionality.
Manage project plans on impactful supply chain improvement initiatives and coordinate resources for successful completion.
Minimum Qualifications: Education Bachelor’s degree in Industrial Engineering, Business, Finance, Accounting, Information Systems, Mathematics or Applied Science.
Work Experience At least 4 years of manufacturing operations and/or inventory management experience.
Experience communicating to groups of managers, clients, customers, vendors, senior managers and the general public.
Demonstrated experience working on improvement or analysis initiatives.
Knowledge/Skills/Abilities Advanced skill level in Microsoft Excel.
Intermediate skill level in Microsoft Access.
Basic understanding of SQL or a similar coding language.
Experience developing reporting in or utilizing advanced Business Intelligence tools to query data – e.g.
Tableau, Business Objects, Composite Studio, MicroStrategy, PowerBI, etc.
Experience applying standard financial, accounting and business problem-solving skills to business problems.
Preferred Qualifications: Work Experience APICS CPIMor CSCP Six Sigma Green Belt Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $85,000.00
- $128,000.00 Annual The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
This role is bonus and/or incentive eligible.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
Not Specified
Nuclear Engineer
Salary not disclosed
Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.
Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.
What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.
Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.
Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.
Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.
Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.
Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.
Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.
Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.
Specific options depend on the Sailor's status, training, and current Navy policy.
Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.
Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.
Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.
Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.
Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.
It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.
Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.
Not Specified
S
Engineering Technician II
Salary not disclosed
Position Title : Engineering Technician II Work Location: Round Lake, IL, USA 60073 Assignment Duration: 10+ Months Work Schedule: Standard working hours 8-5 (can be adjusted +/- 1 hour if needed) Work Arrangement: On-site Position Summary: Work on assignments that are simple or moderately complex in nature where judgment is required in resolving problems and making routine recommendations.
Background & Context: • This is a position in an R&D lab which will usually require hands on/on-site work.
• Will they need to enter clean room? NO Key Responsibilities: • Responsible for performing a wide variety of research and/or development laboratory tasks and experiments.
• May make detailed observations, analyze data and interpret results.
• Maintain medical device laboratory equipment and inventory levels for laboratory supplies.
• May write experimental reports, summaries and protocols.
• May also develop and maintain record keeping for experiment performed.
• Perform limited troubleshooting and calibration of instruments.
• Individual usually is assigned routine assembly and testing portions of projects (e.g.
Product performance and software script testing).
Qualification & Experience: • AA degree or higher • 1-2 yrs of mechanical or electrical experience is strongly preferred, or engineering grads with some intern experience • Good written and verbal communication skills • Basic computer skills such as word processing, data entry and e-mail • Basic science and/or math skills • Team orientation • Mechanical or Electrical background would be preferred • Strong documentation skills • Following procedures, but also being able to think outside the box and trouble shoot issues found • Attention to detail • Experience with technical documentation • Ability to work on a team • Troubleshooting using basic lab equipment such as scopes, meters, analytical balances • Ability to understand technical schematics and specifications • Strong computer experience with Microsoft tools, and statistical tools Key Responsibilities: • Responsible for performing a wide variety of research and/or development laboratory tasks and experiments.
• May make detailed observations, analyze data and interpret results.
• Maintain medical device laboratory equipment and inventory levels for laboratory supplies.
• May write experimental reports, summaries and protocols.
• May also develop and maintain record keeping for experiment performed.
• Perform limited troubleshooting and calibration of instruments.
• Individual usually is assigned routine assembly and testing portions of projects (e.g.
Product performance and software script testing).
Background & Context: • This is a position in an R&D lab which will usually require hands on/on-site work.
• Will they need to enter clean room? NO Key Responsibilities: • Responsible for performing a wide variety of research and/or development laboratory tasks and experiments.
• May make detailed observations, analyze data and interpret results.
• Maintain medical device laboratory equipment and inventory levels for laboratory supplies.
• May write experimental reports, summaries and protocols.
• May also develop and maintain record keeping for experiment performed.
• Perform limited troubleshooting and calibration of instruments.
• Individual usually is assigned routine assembly and testing portions of projects (e.g.
Product performance and software script testing).
Qualification & Experience: • AA degree or higher • 1-2 yrs of mechanical or electrical experience is strongly preferred, or engineering grads with some intern experience • Good written and verbal communication skills • Basic computer skills such as word processing, data entry and e-mail • Basic science and/or math skills • Team orientation • Mechanical or Electrical background would be preferred • Strong documentation skills • Following procedures, but also being able to think outside the box and trouble shoot issues found • Attention to detail • Experience with technical documentation • Ability to work on a team • Troubleshooting using basic lab equipment such as scopes, meters, analytical balances • Ability to understand technical schematics and specifications • Strong computer experience with Microsoft tools, and statistical tools Key Responsibilities: • Responsible for performing a wide variety of research and/or development laboratory tasks and experiments.
• May make detailed observations, analyze data and interpret results.
• Maintain medical device laboratory equipment and inventory levels for laboratory supplies.
• May write experimental reports, summaries and protocols.
• May also develop and maintain record keeping for experiment performed.
• Perform limited troubleshooting and calibration of instruments.
• Individual usually is assigned routine assembly and testing portions of projects (e.g.
Product performance and software script testing).
Not Specified
M
Maintenance Tech I- 12 HR PM Shift
🏢 Medline Industries - Transportation & Operations
Salary not disclosed
Job Summary Under limited supervision, set up, adjust, perform preventative maintenance, troubleshoot, repair, and maintain assigned equipment with responsibility for production and quality.
Job Description Responsibilities: Perform preventive maintenance and routine inspections on assigned conveyors, automation, robotics and ancillary equipment as needed.
Perform routine troubleshooting of assigned out of service equipment and correct issues, act as an escalation point for lower level technicians, and escalate to leadership and/or more senior technicians as needed.
Record all maintenance issues in maintenance log for each line.
Document all work in the computerized maintenance management system (CMMS) and ticketing systems as appropriate and maintain accurate records of all operating logs for fire pumps, generators, HVAC equipment, and other facility systems that are tested on a routine basis.
Perform root cause analysis of major downtime events.
Assist maintenance mechanics in work that requires two people or when operational needs demand.
Perform facility/building project work as assigned.
Tasks include, but are not limited to, light bulb/ballast replacement, door repairs, furniture installation, ceiling tile replacement, carpentry duties, plumbing repairs and maintaining operation logs.
Assemble and test equipment to verify correct operation and production.
Analyze and record cause of production delays on daily production reports and initiate procedures to solve equipment malfunctions.
Examine defects and analyze spoilage causes and, where possible, take corrective action and verify the corrective action has eliminated the problems.
Required Experience: Education High school diploma or equivalent Work Experience 3 year of experience with conveyor, automation, or robotics equipment repair and maintenance Fundamental understanding of machinery/equipment Basic skill level in multiple computer software packages including Microsoft Excel Experience working with inputs, outputs, and PLC logic systems and ability to troubleshoot these systems
- Willing to travel at least/up to 10% of the time for business purposes (within state and out of state).
Physical Abilities:- Frequently move, lift, carry supplies/equipment up to 50 lbs and may have to occasionally lift up to 75 lbs Must be able to stand for minimum of 8 hours and up to 12 hours for up to 6 days a week.
Must be willing to learn new equipment as it is brought on-line. Ability to continuously ascend and descend from ladders and stairs, work at heights and/or from a ladder, work from a lying down position, work with your hands above your head.
Willing to operate material handling equipment (i.e.
fork truck).
Write documents and reports using writing instruments and computers Read information, often in small print (drawings) Follow appropriate safety procedures such as Lock Out/Tag Out, Arc Flash, etc.
and use Personal Protective Equipment (PPE) while maintaining equipment, and ensure a safe work environment by eliminating potential equipment safety hazards Willing to travel at least/up to 10% of the time for business purposes (within state and out of state).
Must be willing to work overtime as needed.
Preferred Qualifications Associates Degree in Mechatronics, Electrical Engineering Technology, Mechanical Engineering Technology, HVAC, or equivalent.
Graduate of an apprenticeship program or hold current trade certification.
At least 3 years of experience in a building maintenance position servicing a facility larger than 75,000 square feet.
Physical activities necessary to perform one or more essential functions of the position: Ability to bend, twist, reach, push, lift for extended periods daily
- Frequently move, lift, carry supplies/equipment up to 50 lbs and may have to occasionally lift up to 75 lbs Must be able to stand for minimum of 8 hours and up to 12 hours for up to 6 days a week Ability to continuously ascend and descend from ladders and stairs, work at heights and/or from a ladder, work from a lying down position, work with your hands above your head.
Willing to operate material handling equipment (i.e.
fork truck).
- Write documents and reports using writing instruments and computers
- Read information, often in small print (drawings) Follow appropriate safety procedures such as Lock Out/Tag Out, Arc Flash, etc.
and use Personal Protective Equipment (PPE) while maintaining equipment, and ensure a safe work environment by eliminating potential equipment safety hazards Ability to work overtime and must be available for on-call requests as needed Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $28.75
- $41.75 Hourly The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
Job Description Responsibilities: Perform preventive maintenance and routine inspections on assigned conveyors, automation, robotics and ancillary equipment as needed.
Perform routine troubleshooting of assigned out of service equipment and correct issues, act as an escalation point for lower level technicians, and escalate to leadership and/or more senior technicians as needed.
Record all maintenance issues in maintenance log for each line.
Document all work in the computerized maintenance management system (CMMS) and ticketing systems as appropriate and maintain accurate records of all operating logs for fire pumps, generators, HVAC equipment, and other facility systems that are tested on a routine basis.
Perform root cause analysis of major downtime events.
Assist maintenance mechanics in work that requires two people or when operational needs demand.
Perform facility/building project work as assigned.
Tasks include, but are not limited to, light bulb/ballast replacement, door repairs, furniture installation, ceiling tile replacement, carpentry duties, plumbing repairs and maintaining operation logs.
Assemble and test equipment to verify correct operation and production.
Analyze and record cause of production delays on daily production reports and initiate procedures to solve equipment malfunctions.
Examine defects and analyze spoilage causes and, where possible, take corrective action and verify the corrective action has eliminated the problems.
Required Experience: Education High school diploma or equivalent Work Experience 3 year of experience with conveyor, automation, or robotics equipment repair and maintenance Fundamental understanding of machinery/equipment Basic skill level in multiple computer software packages including Microsoft Excel Experience working with inputs, outputs, and PLC logic systems and ability to troubleshoot these systems
- Willing to travel at least/up to 10% of the time for business purposes (within state and out of state).
Physical Abilities:- Frequently move, lift, carry supplies/equipment up to 50 lbs and may have to occasionally lift up to 75 lbs Must be able to stand for minimum of 8 hours and up to 12 hours for up to 6 days a week.
Must be willing to learn new equipment as it is brought on-line. Ability to continuously ascend and descend from ladders and stairs, work at heights and/or from a ladder, work from a lying down position, work with your hands above your head.
Willing to operate material handling equipment (i.e.
fork truck).
Write documents and reports using writing instruments and computers Read information, often in small print (drawings) Follow appropriate safety procedures such as Lock Out/Tag Out, Arc Flash, etc.
and use Personal Protective Equipment (PPE) while maintaining equipment, and ensure a safe work environment by eliminating potential equipment safety hazards Willing to travel at least/up to 10% of the time for business purposes (within state and out of state).
Must be willing to work overtime as needed.
Preferred Qualifications Associates Degree in Mechatronics, Electrical Engineering Technology, Mechanical Engineering Technology, HVAC, or equivalent.
Graduate of an apprenticeship program or hold current trade certification.
At least 3 years of experience in a building maintenance position servicing a facility larger than 75,000 square feet.
Physical activities necessary to perform one or more essential functions of the position: Ability to bend, twist, reach, push, lift for extended periods daily
- Frequently move, lift, carry supplies/equipment up to 50 lbs and may have to occasionally lift up to 75 lbs Must be able to stand for minimum of 8 hours and up to 12 hours for up to 6 days a week Ability to continuously ascend and descend from ladders and stairs, work at heights and/or from a ladder, work from a lying down position, work with your hands above your head.
Willing to operate material handling equipment (i.e.
fork truck).
- Write documents and reports using writing instruments and computers
- Read information, often in small print (drawings) Follow appropriate safety procedures such as Lock Out/Tag Out, Arc Flash, etc.
and use Personal Protective Equipment (PPE) while maintaining equipment, and ensure a safe work environment by eliminating potential equipment safety hazards Ability to work overtime and must be available for on-call requests as needed Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $28.75
- $41.75 Hourly The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
Not Specified
J
Industrial Electrician
🏢 Jobot
Salary not disclosed
Industrial Electrician Opportunity / $30-$42 Per Hour / Great Benefits and Growth Opportunity This Jobot Job is hosted by: Jack Campbell Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $30
- $42 per hour A bit about us: A leading custom plastics manufacturer in the McHenry area is seeking a skilled Industrial Electrician to join their maintenance team.
This is a hands-on, full-time role supporting automated manufacturing systems, ensuring equipment uptime, and contributing to continuous improvement initiatives in a clean, well-organized facility.
Why join us? Stable and growing manufacturer with long-term employee retention Strong culture of safety, training, and professional growth Competitive hourly pay, overtime opportunities, and excellent benefits Modern, climate-controlled facility with top-tier equipment Job Details Key Responsibilities Troubleshoot, repair, and maintain electrical systems on injection molding and auxiliary equipment Install and service 3-phase 480V electrical systems, motors, drives, and control panels Perform PLC troubleshooting and I/O diagnostics (Allen-Bradley preferred) Support machine startups, changeovers, and new equipment installations Collaborate with maintenance and engineering teams to reduce downtime and improve efficiency Follow all safety protocols and ensure compliance with electrical codes and standards Qualifications 3+ years of experience as an Industrial or Maintenance Electrician in a manufacturing environment Strong knowledge of electrical schematics, blueprints, and industrial wiring practices Experience with PLCs, VFDs, sensors, and control systems Basic mechanical and pneumatic troubleshooting skills a plus Ability to work independently and handle multiple priorities in a fast-paced setting Open to working occasional overtime or off-shift hours when needed Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $30
- $42 per hour A bit about us: A leading custom plastics manufacturer in the McHenry area is seeking a skilled Industrial Electrician to join their maintenance team.
This is a hands-on, full-time role supporting automated manufacturing systems, ensuring equipment uptime, and contributing to continuous improvement initiatives in a clean, well-organized facility.
Why join us? Stable and growing manufacturer with long-term employee retention Strong culture of safety, training, and professional growth Competitive hourly pay, overtime opportunities, and excellent benefits Modern, climate-controlled facility with top-tier equipment Job Details Key Responsibilities Troubleshoot, repair, and maintain electrical systems on injection molding and auxiliary equipment Install and service 3-phase 480V electrical systems, motors, drives, and control panels Perform PLC troubleshooting and I/O diagnostics (Allen-Bradley preferred) Support machine startups, changeovers, and new equipment installations Collaborate with maintenance and engineering teams to reduce downtime and improve efficiency Follow all safety protocols and ensure compliance with electrical codes and standards Qualifications 3+ years of experience as an Industrial or Maintenance Electrician in a manufacturing environment Strong knowledge of electrical schematics, blueprints, and industrial wiring practices Experience with PLCs, VFDs, sensors, and control systems Basic mechanical and pneumatic troubleshooting skills a plus Ability to work independently and handle multiple priorities in a fast-paced setting Open to working occasional overtime or off-shift hours when needed Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
M
Sr Manager Business Systems
🏢 Medline Industries - Transportation & Operations
Salary not disclosed
Job Summary Provides overall leadership for the support and operation of SPT Business Systems, encompassing first-level support through problem management.
Ensure system operations meet established service level agreements through close collaboration with business stakeholders, IT, remote business system teams, and end users.
Leads the implementation and reporting of incident management processes, with a focus on root cause resolution and impact reduction.
Ensures adherence to business system governance, serves as a key point of contact for production system knowledge, manages change processes for all SPT core systems, and oversees user and system administration for reporting and Citizen IT applications.
Applies a strong understanding of business processes and technologies to drive short-term improvements while supporting long-term strategic objectives.
Job Description Serves as the primary liaison between production systems and IT and leads IS-driven technology initiatives, including enterprise rollouts.
Develops and mentors team members through onboarding, training, performance management, and career development, fostering high engagement, strong morale, and a well-staffed organization with the required competencies.
Holds overall accountability for the service and support of SPT Business Systems, from first-level support through problem management.
Establishes and meets service level agreements with business stakeholders by analyzing incidents, identifying systemic issues, and driving root-cause resolution in collaboration with IT and users.
Ensures strong IT and business alignment across the design, testing, and change management lifecycle for all core system enhancements, translating business needs into prioritized system change requests.
Leads communication efforts related to incidents, outages, and system changes by developing, maintaining clear communication plans, and collaborating closely with business system teams across multiple sites.
Ensures adherence to business system governance and promotes effective stakeholder engagement, accountability, and transparency.
Leads the Incident Management process, including timely completion of Post-Incident Reviews (PIRs).
Management responsibilities include: Lead staffing and people management activities, including hiring, compensation recommendations, performance evaluations, training and development, workforce planning, and work assignment.
Develop, recommend, and implement policies and standards related to governance, incident management, and service delivery.
Provide leadership to ensure organizational readiness, capability alignment, and effective resource utilization in support of business objectives.
Education Bachelor’s degree in IT, Business, Engineering, Operations, Computer Science, or Supply Chain.
Work Experience At least 5 years of systems project management, business transformation, governance and/or process improvement, Incident Management, and ITIL.
At least 3 years of experience leading cross-functional teams to drive business/technology initiatives.
Experience supporting Manufacturing/Warehouse, Sales and marketing systems, Experience demonstrating expertise using one or more of the following: ERP system; KBM and/or AS400 systems.
Knowledge / Skills / Abilities At least 5 years’ experience managing people; including hiring, on-boarding, developing, motivating, and directing people as they work.
Experience influencing and persuading decision-making through data analysis.
Advanced skills in Microsoft Office suite including PowerPoint, Excel (i.e., statistical functions, v-lookups, large pivot tables, charts/graphs, sorting, etc.) and Project.
Position requires travel up to 20% of the time for business purposes (within state and out of state).
PREFERRED JOB REQUIREMENTS Education Bachelor’s degree (preferably in Business Administration or IT).
APICS CPIM (or equivalent supply chain management) certification.
PMP or PMBOK (or other Project Management) certification.
Certification / Licensure APICS CPIM (or equivalent supply chain management) certification.
PMP or PMBOK (or other Project Management) certification.
Work Experience Experience building internal and customer-facing applications.
Proficiency in .NET application development.
Knowledge of Agile methodologies utilizing tools such as Jira, etc.
Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $134,000.00
- $201,000.00 Annual The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
This role is bonus and/or incentive eligible.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
Ensure system operations meet established service level agreements through close collaboration with business stakeholders, IT, remote business system teams, and end users.
Leads the implementation and reporting of incident management processes, with a focus on root cause resolution and impact reduction.
Ensures adherence to business system governance, serves as a key point of contact for production system knowledge, manages change processes for all SPT core systems, and oversees user and system administration for reporting and Citizen IT applications.
Applies a strong understanding of business processes and technologies to drive short-term improvements while supporting long-term strategic objectives.
Job Description Serves as the primary liaison between production systems and IT and leads IS-driven technology initiatives, including enterprise rollouts.
Develops and mentors team members through onboarding, training, performance management, and career development, fostering high engagement, strong morale, and a well-staffed organization with the required competencies.
Holds overall accountability for the service and support of SPT Business Systems, from first-level support through problem management.
Establishes and meets service level agreements with business stakeholders by analyzing incidents, identifying systemic issues, and driving root-cause resolution in collaboration with IT and users.
Ensures strong IT and business alignment across the design, testing, and change management lifecycle for all core system enhancements, translating business needs into prioritized system change requests.
Leads communication efforts related to incidents, outages, and system changes by developing, maintaining clear communication plans, and collaborating closely with business system teams across multiple sites.
Ensures adherence to business system governance and promotes effective stakeholder engagement, accountability, and transparency.
Leads the Incident Management process, including timely completion of Post-Incident Reviews (PIRs).
Management responsibilities include: Lead staffing and people management activities, including hiring, compensation recommendations, performance evaluations, training and development, workforce planning, and work assignment.
Develop, recommend, and implement policies and standards related to governance, incident management, and service delivery.
Provide leadership to ensure organizational readiness, capability alignment, and effective resource utilization in support of business objectives.
Education Bachelor’s degree in IT, Business, Engineering, Operations, Computer Science, or Supply Chain.
Work Experience At least 5 years of systems project management, business transformation, governance and/or process improvement, Incident Management, and ITIL.
At least 3 years of experience leading cross-functional teams to drive business/technology initiatives.
Experience supporting Manufacturing/Warehouse, Sales and marketing systems, Experience demonstrating expertise using one or more of the following: ERP system; KBM and/or AS400 systems.
Knowledge / Skills / Abilities At least 5 years’ experience managing people; including hiring, on-boarding, developing, motivating, and directing people as they work.
Experience influencing and persuading decision-making through data analysis.
Advanced skills in Microsoft Office suite including PowerPoint, Excel (i.e., statistical functions, v-lookups, large pivot tables, charts/graphs, sorting, etc.) and Project.
Position requires travel up to 20% of the time for business purposes (within state and out of state).
PREFERRED JOB REQUIREMENTS Education Bachelor’s degree (preferably in Business Administration or IT).
APICS CPIM (or equivalent supply chain management) certification.
PMP or PMBOK (or other Project Management) certification.
Certification / Licensure APICS CPIM (or equivalent supply chain management) certification.
PMP or PMBOK (or other Project Management) certification.
Work Experience Experience building internal and customer-facing applications.
Proficiency in .NET application development.
Knowledge of Agile methodologies utilizing tools such as Jira, etc.
Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $134,000.00
- $201,000.00 Annual The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
This role is bonus and/or incentive eligible.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
Not Specified
J
Structural Steel Project Estimator
🏢 Jobot
Salary not disclosed
Established, stable metals manufacturer looking for an experienced project Estimator to join the team! This Jobot Job is hosted by: Catherine Reid Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $85,000
- $105,000 per year A bit about us: Decades-old Metals Manufacturing company offering stability, training, and terrific career opportunity! Why join us? We work on great projects and have a terrific, talented team who has earned credibility in the space.
We work with integrity, experience, and compassion.
Our benefits package and long-term career growth are terrific
- come join us! Job Details Job Details: We are currently seeking an experienced, reliable metals manufacturing project Estimator to join our team.
This is a permanent, full-time position offering a competitive salary and benefits package.
As a Project Estimator, you will play a critical role in our company's projects, providing accurate and comprehensive cost estimates that drive our success.
You will be working alongside a team of dedicated professionals committed to delivering high-quality results.
This role requires a deep understanding of construction processes, excellent numerical skills, and an analytical mindset.
Responsibilities: 1.
Review and comprehend technical and administrative documents such as Requests for Proposals (RFPs) and blueprints.
2.
Develop comprehensive, detailed cost estimates that incorporate material, labor, equipment, and production timelines.
3.
Coordinate with project managers, engineers, and other construction professionals to gather necessary data for estimates.
4.
Use specialized software and other tools to create and present estimates.
5.
Evaluate suppliers and subcontractors to ensure quality and cost-effectiveness.
6.
Participate in the negotiation and awarding of contracts.
7.
Monitor project progress to identify variances between estimated and actual costs and implement corrective actions when necessary.
8.
Maintain current knowledge of market trends, pricing, and construction processes.
9.
Assist in the preparation of budget and project reports.
Qualifications: 1.
Bachelor's Degree in Structural Engineering, Civil Engineering, or a related field.
2.
A minimum of 5 years’ experience in metals project estimating, with a proven track record of creating accurate and detailed estimates.
3.
Proficiency in reading and interpreting blueprints and technical documents.
4.
Strong knowledge of construction materials, processes, and equipment.
5.
Proficiency in using estimating software and other relevant computer applications.
6.
Excellent numerical skills and an analytical mindset.
7.
Strong negotiation and communication skills.
8.
Ability to work under pressure and meet strict deadlines.
9.
Detail-oriented with strong organizational and project management skills.
10.
A team player with the ability to work independently when needed.
Join us and be a part of a team that values professionalism, integrity, and commitment to excellence.
We look forward to receiving your application! Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $85,000
- $105,000 per year A bit about us: Decades-old Metals Manufacturing company offering stability, training, and terrific career opportunity! Why join us? We work on great projects and have a terrific, talented team who has earned credibility in the space.
We work with integrity, experience, and compassion.
Our benefits package and long-term career growth are terrific
- come join us! Job Details Job Details: We are currently seeking an experienced, reliable metals manufacturing project Estimator to join our team.
This is a permanent, full-time position offering a competitive salary and benefits package.
As a Project Estimator, you will play a critical role in our company's projects, providing accurate and comprehensive cost estimates that drive our success.
You will be working alongside a team of dedicated professionals committed to delivering high-quality results.
This role requires a deep understanding of construction processes, excellent numerical skills, and an analytical mindset.
Responsibilities: 1.
Review and comprehend technical and administrative documents such as Requests for Proposals (RFPs) and blueprints.
2.
Develop comprehensive, detailed cost estimates that incorporate material, labor, equipment, and production timelines.
3.
Coordinate with project managers, engineers, and other construction professionals to gather necessary data for estimates.
4.
Use specialized software and other tools to create and present estimates.
5.
Evaluate suppliers and subcontractors to ensure quality and cost-effectiveness.
6.
Participate in the negotiation and awarding of contracts.
7.
Monitor project progress to identify variances between estimated and actual costs and implement corrective actions when necessary.
8.
Maintain current knowledge of market trends, pricing, and construction processes.
9.
Assist in the preparation of budget and project reports.
Qualifications: 1.
Bachelor's Degree in Structural Engineering, Civil Engineering, or a related field.
2.
A minimum of 5 years’ experience in metals project estimating, with a proven track record of creating accurate and detailed estimates.
3.
Proficiency in reading and interpreting blueprints and technical documents.
4.
Strong knowledge of construction materials, processes, and equipment.
5.
Proficiency in using estimating software and other relevant computer applications.
6.
Excellent numerical skills and an analytical mindset.
7.
Strong negotiation and communication skills.
8.
Ability to work under pressure and meet strict deadlines.
9.
Detail-oriented with strong organizational and project management skills.
10.
A team player with the ability to work independently when needed.
Join us and be a part of a team that values professionalism, integrity, and commitment to excellence.
We look forward to receiving your application! Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
M
Supply Chain Analyst - SPT
🏢 Medline Industries - Transportation & Operations
Salary not disclosed
Job Summary Job Description Summary Under general supervision, identify, conduct, and analyze supply chain data and projects.
Define issues, identify resource needs, and develop project plans.
Facilitate projects from concept to completion.
Job Description Responsibilities: Plan and prepare supply chain and operational analysis.
Monitor accuracy, timeliness and integrity of data for analysis and reporting.
Conduct root cause analysis, problem solving, and process improvement or analytics projects.
Establish, develop, and manage Supply Chain projects.
Identify resource needs and monitor project progress.
Recommend, develop, create and implement standard reporting for routine business reports and ad hoc reporting.
Identify data and reporting tools necessary to perform supply chain and operational analysis.
Communicate the results of key projects and recommend actions/provide guidance on supply chain and operational problems.
Communicate cross functionally with internal and external business partners to identify opportunities for process improvement and root cause analyses including creating metrics dashboards/reporting, sharing information with peers and direct manager, using data to identify issues/solutions, and recommending actions or improvements.
Requirements: Education Bachelor’s degree in Supply Chain Management, Industrial Engineering, Finance, Accounting, Information Services, Mathematics or Applied Statistics.
Relevant Work Experience Experience in project management and data analysis.
At least 2 years of operations and/or supply chain experience.
Experience communicating with internal and external business partners and cross functional teams with various audiences.
Additional Intermediate level skills in Microsoft Access, SQL, Tableau, and/or PowerBI (for example: designing and creating simple queries, modifying data types, adding dates, working with required fields and/or creating labels).
Intermediate level skill in Microsoft Excel (for example: using SUM function, V Look Up, setting borders, pivot tables, setting column width, inserting charts, using text wrap, sorting, setting headers and footers and/or print scaling).
Experience calculating figures and amounts such as discounts, interest, commissions, proportions, percentages and volume.
Experience applying standard financial, accounting and business problem-solving skills to business problems.
Preferred Qualifications: Relevant Work Experience Experience with SAP strongly preferred.
Certification / Licensure CPIM, CSCP, or APICS certification.
Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $67,000.00
- $101,000.00 Annual The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
This role is bonus and/or incentive eligible.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
Define issues, identify resource needs, and develop project plans.
Facilitate projects from concept to completion.
Job Description Responsibilities: Plan and prepare supply chain and operational analysis.
Monitor accuracy, timeliness and integrity of data for analysis and reporting.
Conduct root cause analysis, problem solving, and process improvement or analytics projects.
Establish, develop, and manage Supply Chain projects.
Identify resource needs and monitor project progress.
Recommend, develop, create and implement standard reporting for routine business reports and ad hoc reporting.
Identify data and reporting tools necessary to perform supply chain and operational analysis.
Communicate the results of key projects and recommend actions/provide guidance on supply chain and operational problems.
Communicate cross functionally with internal and external business partners to identify opportunities for process improvement and root cause analyses including creating metrics dashboards/reporting, sharing information with peers and direct manager, using data to identify issues/solutions, and recommending actions or improvements.
Requirements: Education Bachelor’s degree in Supply Chain Management, Industrial Engineering, Finance, Accounting, Information Services, Mathematics or Applied Statistics.
Relevant Work Experience Experience in project management and data analysis.
At least 2 years of operations and/or supply chain experience.
Experience communicating with internal and external business partners and cross functional teams with various audiences.
Additional Intermediate level skills in Microsoft Access, SQL, Tableau, and/or PowerBI (for example: designing and creating simple queries, modifying data types, adding dates, working with required fields and/or creating labels).
Intermediate level skill in Microsoft Excel (for example: using SUM function, V Look Up, setting borders, pivot tables, setting column width, inserting charts, using text wrap, sorting, setting headers and footers and/or print scaling).
Experience calculating figures and amounts such as discounts, interest, commissions, proportions, percentages and volume.
Experience applying standard financial, accounting and business problem-solving skills to business problems.
Preferred Qualifications: Relevant Work Experience Experience with SAP strongly preferred.
Certification / Licensure CPIM, CSCP, or APICS certification.
Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $67,000.00
- $101,000.00 Annual The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
This role is bonus and/or incentive eligible.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
Not Specified
M
Senior Engineer
🏢 Medline Industries - Transportation & Operations
Salary not disclosed
Job Summary Join Medline’s high‑performance team at our SPT facility in Mundelein, IL.
This site is a critical part of the company’s sterile product manufacturing footprint, supporting production, quality, warehousing, and maintenance functions.
The work performed here helps ensure healthcare providers have access to dependable, ready‑to‑use procedure trays that support efficient and safe patient care.
As a key contributor, you will plan, organize, and control increased productivity projects from conceptual stages through production cycles in order to optimize profit and meet marketing, financial, and corporate growth objectives.
Investigate current operations practices and scope, develop and implement changes that will improve operational productivity, and provide subject matter expertise.
Job Description Responsibilities: Analyze, review, and recommend technological solutions and innovative techniques to reduce Medline’s expenses and improve cost structure while maintaining or improving quality.
Analyze, review, recommend, and implement technological solutions and innovative techniques to reduce Medline’s expenses and improve cost structure while maintaining or improving quality.
Lead various scale projects from concept to realization involving individuals from multiple departments and disciplines.
Develop up to large-scale project plans to include action steps, schedules, etc.
to enhance ability to deliver quality projects on-time and within budget.
Perform complex assignments to develop new and/or enhance existing procedures, statistical analysis, inspections, and validation activities.
Conduct training, when appropriate, on quality assurance and/or engineering concepts and tools, including but not limited to inspection, measurement, test methods, process validation, DOE, and comprehensive equipment operation procedures.
Subject matter expert associated with content, processes, and procedures.
Apply functional knowledge to the design and customization of workflow systems that provide seamless integration.
Be aware of industry standards and understanding of cost benefit analysis to justify tasks/projects.
Provide specialized expertise to the company through project, account and people management.
Requirements: Education Bachelor’s degree in an Engineering discipline.
Additional: At least 4 years engineering experience.
Technical writing, research paper writing, and/or experimental design experience.
ERP systems knowledge and experience.
Intermediate skill level in computer and systems use (Microsoft Word, PowerPoint, and Excel).
International travel required (10-20%) Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $92,000.00
- $138,000.00 Annual The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
This role is bonus and/or incentive eligible.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
This site is a critical part of the company’s sterile product manufacturing footprint, supporting production, quality, warehousing, and maintenance functions.
The work performed here helps ensure healthcare providers have access to dependable, ready‑to‑use procedure trays that support efficient and safe patient care.
As a key contributor, you will plan, organize, and control increased productivity projects from conceptual stages through production cycles in order to optimize profit and meet marketing, financial, and corporate growth objectives.
Investigate current operations practices and scope, develop and implement changes that will improve operational productivity, and provide subject matter expertise.
Job Description Responsibilities: Analyze, review, and recommend technological solutions and innovative techniques to reduce Medline’s expenses and improve cost structure while maintaining or improving quality.
Analyze, review, recommend, and implement technological solutions and innovative techniques to reduce Medline’s expenses and improve cost structure while maintaining or improving quality.
Lead various scale projects from concept to realization involving individuals from multiple departments and disciplines.
Develop up to large-scale project plans to include action steps, schedules, etc.
to enhance ability to deliver quality projects on-time and within budget.
Perform complex assignments to develop new and/or enhance existing procedures, statistical analysis, inspections, and validation activities.
Conduct training, when appropriate, on quality assurance and/or engineering concepts and tools, including but not limited to inspection, measurement, test methods, process validation, DOE, and comprehensive equipment operation procedures.
Subject matter expert associated with content, processes, and procedures.
Apply functional knowledge to the design and customization of workflow systems that provide seamless integration.
Be aware of industry standards and understanding of cost benefit analysis to justify tasks/projects.
Provide specialized expertise to the company through project, account and people management.
Requirements: Education Bachelor’s degree in an Engineering discipline.
Additional: At least 4 years engineering experience.
Technical writing, research paper writing, and/or experimental design experience.
ERP systems knowledge and experience.
Intermediate skill level in computer and systems use (Microsoft Word, PowerPoint, and Excel).
International travel required (10-20%) Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $92,000.00
- $138,000.00 Annual The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
This role is bonus and/or incentive eligible.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
Not Specified
jobs by
✓ All jobs loaded