Engineering Jobs in Itasca Illinois Remote
269 positions found — Page 8
K
Senior Engineer, MEMS Characterization
Salary not disclosed
Title: Senior Engineer,MEMS Characterization
Department: MEMS Engineering
Location: Itasca, Illinois
SUMMARY DESCRIPTION:
MEMS Characterization Senior Engineer will work with design, process, and failure analysis engineer on assisting characterization and failure analysis of the MEMS device, while supporting technology development, product qualifications and quality monitoring. Employee will maintain and develop new test solutions, recommend hardware requirements based on existing trends in characterization.
Responsibilities
- Developing and maintain MEMS test solutions for production failure analysis, collaborating with design and process engineering to further characterization efforts and drive yield improvement
- Ensuring hardware and software installations are maintained.
- Continuous improvement of characterization capabilities collaborating with MEMS development team
- Perform microphone, MEMS, assembly failure analysis
- Work with design and process engineer to define characterization requirements and support execution of the characterization, including submitting work order requests and writing characterization reports.
Qualifications
- Master of Science/Engineering in Electrical/Mechanical/Material/Physics (or related field) with 2-5 years’ experience. PhD is a plus
- Experience in troubleshooting, debugging and with failure analysis of MEMS sensors is desired
- Familiar with material/device characterization using optical, electrical, mechanical methods
- Basic knowledge of acoustics and mechanics is an asset.
- Must be a team player with good communication skill.
- Familiar with material/device characterization using optical, electrical, mechanical methods
- Knowledge of calibration methodologies and best practices
- Basic knowledge of statistical analysis (JMP, MiniTab, R) is an asset
- Reliability testing experience is an asset
- Experience with electrical test equipment such as parameter analyzer, oscilloscope, probe station, and data acquisition system are desired
- Experience with advanced surface science methodologies (SEM, Raman, Auger, FIB, FTIR) an asset
- Hands on experience on developing environmental testing setup and fixtures for sensors under thermal, vibration, and electrical tests is a plus
- Solid foundation in MEMS microphone acoustics theory, including capacitive transduction principles (Experience analyzing thin-film residual stress, mechanical-electrical sensitivity optimization, damping resistance (Skvor's formula), and high-frequency response/SNR enhancement mechanisms) is a plus
- Proficient in finite element analysis (FEA) tools such as COMSOL Multiphysics or ANSYS for 3D MEMS microphone simulations is a plus
- Understand the principle of dynamic system modeling and proficient in Matlab Simulink and LTSpice is a plus
COMPANY DESCRIPTION:
Knowles is a market leader and global provider of advanced micro-acoustic microphones and balanced armature speakers, audio solutions, and high performance capacitors and radio frequency ("RF") filtering products, serving the MedTech, defense, consumer electronics, electric vehicle, industrial, and communications markets. Our focus on the customer, combined with unique technology, proprietary manufacturing techniques, and global operational expertise, enables us to deliver innovative solutions across multiple applications. Knowles, founded in 1946 and headquartered in Itasca, Illinois, has approximately 7,000 employees at facilities located in 13 countries around the world. At Knowles, we are committed to engineering a better tomorrow through the actions we take on a daily basis. We believe that our focus on ethical, socially responsible, and environmentally sustainable behavior guides our decision-making processes and helps keep us accountable. Visit us at
EEO-M/F/D/V
Not Specified
I
Buyer/Planner
Salary not disclosed
Company Description
ITW Electronic Component Solutions is a global leader, comprised of distinguished brands specializing in unique product technologies for various industries. These industry-leading brands provide innovative solutions to key markets, reinforcing ITW as a trusted name in electronic component solutions worldwide. The ITW ECS group includes ITW Formex, ITW Linx, and ITW Lumex, all of which contribute to the development of cutting-edge technologies across global markets.
The Buyer/Planner is responsible for planning and scheduling production activities while managing the procurement of raw materials, components, and services required for the ITW ECS business units. This role ensures that production schedules, material availability, and supplier performance align to meet customer demand, maintain optimal inventory levels, and support overall operational efficiency. This is a full-time, onsite position in Bartlett, IL. Only local candidates will be considered.
Key Responsibilities
Production Planning & Scheduling
- Develop, maintain, and adjust production schedules based on customer demand, forecasts, and capacity constraints
- Coordinate daily production planning activities with operations, ensuring labor, equipment, and materials are properly allocated
- Monitor work‑in‑process and finished goods levels to ensure on‑time order completion
- Communicate schedule changes or risks to operations, customer service, and leadership
Material Planning & Inventory Management
- Maintain accurate material requirements planning (MRP) within the ERP system
- Ensure adequate inventory levels are maintained to meet production schedules while minimizing excess or obsolete stock
- Conduct root‑cause analysis on shortages, delays, or inventory inaccuracies and implement corrective actions
- Track safety stock levels and update planning parameters as needed
Purchasing & Supplier Management
- Source, select, and purchase raw materials, components, and indirect supplies in alignment with production needs
- Manage supplier relationships and monitor vendor performance.
- Track and publish critical supply chain metrics, including customer and supplier on-time delivery.
- Follow up on open purchase orders, expedite materials when needed, and resolve delivery or quality issues
- Maintain accurate vendor records and purchasing data in the ERP system
Capacity & Resource Planning
- Analyze production capacity, equipment constraints, and labor availability to ensure feasible schedules
- Recommend adjustments to staffing levels, shift schedules, or outsourcing when required to meet demand
- Partner with engineering on new products, engineering changes, and phase-outs
Cross-Functional Collaboration
- Coordinate with procurement, operations, engineering, customer service, and quality to maintain smooth production flow
- Communicate proactively regarding material constraints, schedule risks, and priority changes
- Support S&OP processes by providing data on capacity, demand, inventory, and supplier performance
Continuous Improvement
- Implement Lean, Six Sigma, or other process improvement initiatives to enhance material flow and scheduling accuracy
- Improve planning tools, part parameters, and forecasting methods
- Participate in cost-reduction efforts through sourcing, inventory optimization, and process efficiencies
Minimum Required Skills and Education
- High School Diploma required
- 3 years of experience in production planning, materials management, or purchasing in a manufacturing environment
- Prior experience with ERP/MRP systems
- Strong analytical and organizational skills
- Proficiency with Excel and planning tools
- Knowledge of manufacturing processes, capacity planning, and inventory control principles
- Ability to speak, read, and write in English
Preferred Skills and Education
- Associate’s or Bachelor’s degree in Supply Chain, Operations, Business or related field
- Experience with Epicor ERP preferred
Work Conditions
- Primarily office environment, but may require periodic walking throughout the facility to coordinate with production, shipping, and warehouse teams
This is a full-time, onsite position in Bartlett, IL. Only candidates local to the Chicago area will be considered.
Compensation range: $30-$32 per hour
Why ITW ECS?
Here’s what we offer to help you build the future you want:
- Generous Retirement Benefits – 401(k) match PLUS an additional retirement contribution to help you plan for the future.
- Paid Time Off – Paid holidays, sick days, and vacation time to take time for what matters.
- Company-Paid Insurance – Life, AD&D, Short-Term & Long-Term Disability insurance to give you peace of mind.
- Family-Friendly Benefits – 4 weeks of paid parental leave and adoption reimbursement to support your family journey.
- Education Assistance – tuition reimbursement because we believe in investing in your personal and professional development.
ITW is an equal opportunity employer. We value our colleagues’ unique perspectives, experiences and ideas and create workplaces where everyone can develop their careers and perform to their full potential.
As an equal employment opportunity employer, ITW is committed to equal employment opportunity and fair treatment for employees, beginning with the hiring process and continuing through all aspects of the employment relationship.
All qualified applicants will receive consideration for employment without regard to race, color, sex, gender identity, sexual orientation, religion, national origin, age, disability, protected Veteran status or any other characteristic protected by applicable federal, state, or local laws.
Not Specified
M
Production Control Coordinator
Salary not disclosed
About the Company
MultiTech, founded in 1993 and headquartered in Carol Stream, IL, is a top provider of highly engineered metal components and assemblies. MultiTech serves the Automotive, Industrial, Hydraulics and Power Transmission & Distribution market industries, with sales of $180 million. MultiTech operates seven manufacturing facilities and six distribution sites in the US, Mexico, and Asia. Our mission is to build a leading global metal manufacturing and assembly organization combining technology with superior quality manufacturing capabilities executed by our best asset - our employees. The ideal candidate will build on their experience and skills while growing with the company through career advancement opportunities.
About the Role
The Production Control Coordinator is responsible for planning, scheduling, and coordinating production activities to ensure efficient workflow, on-time delivery, and accurate ERP system data. Works closely with Operations, Purchasing, and Shipping to support daily manufacturing needs.
Responsibilities
- ERP Management (Epicor):
- Maintain and update production schedules within Epicor.
- Create and release work orders/jobs and ensure all required data is accurate.
- Monitor job statuses and perform job closings in a timely manner.
- Maintain accurate BOM/routing changes when identified thru Engineering.
Production Scheduling:
- Schedule primary machines and key resources to optimize throughput and minimize downtime.
- Adjust schedules based on priority changes, machine availability, material constraints, and customer needs.
- Communicate daily schedule priorities with Production Supervisors.
Material Coordination:
- Release raw material to jobs and ensure correct inventory transactions.
- Prevent shortages and ensure timely material availability.
Workflow & Coordination:
- Track WIP levels and move jobs through departments as required.
- Support continuous improvement to reduce bottlenecks and improve lead times.
- Maintain strong communication with Manufacturing, Quality, and Shipping teams.
- Reporting & Accuracy:
- Analyze and resolve Epicor transaction errors, quantity discrepancies, and job variances.
- Generate daily/weekly production reports for management review.
Qualifications
- Experience with ERP systems; Epicor experience preferred.
- Strong understanding of manufacturing workflows and machine scheduling.
- Ability to interpret work orders, BOMs, and blueprints (a plus).
- Excellent organizational and communication skills.
- Detail-oriented with strong problem-solving abilities.
Job Metrics / Success Indicators:
- On-time delivery performance
- Schedule adherence and machine utilization
- Accuracy of inventory and job costing
- Reduction in late jobs and production bottlenecks
Equal Opportunity Statement
MultiTech Industries is an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate on the basis of race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law.
Not Specified
N
Utility Construction Project Manager
Salary not disclosed
Terms of Employment
- W2 Contract-to-Hire, 12 Months
- This role operates on a hybrid schedule, requiring three days in-office (Tuesday, Wednesday, and Thursday) and two days remote (Monday and Friday)
- Core working hours between 09:00 and 15:00
Overview
Our client is seeking a Senior Project Manager to manage engineering, construction, outage coordination, testing, and commissioning activities for transmission and substation projects. The successful candidate will oversee Transmission level Protection and Control replacement projects and/or Transmission line projects, ensuring seamless execution through a deep understanding of equipment function and construction sequencing.
Responsibilities
- Manage the full lifecycle of transmission and substation projects, including engineering, construction, and commissioning.
- Coordinate complex outages and system operations to ensure project milestones are met without compromising grid stability.
- Interpret one-line diagrams and technical specifications to understand equipment interfaces and functions.
- Anticipate and mitigate risks related to outages and commissioning sequences.
- Collaborate and communicate effectively with internal teams, including engineering, construction, and system operations.
- Oversee physical construction projects, ensuring adherence to safety and technical standards.
Required Skills & Experience
- STEM degree or a technical degree; however, significant professional experience may complement an arts degree.
- 7+ years of relevant experience.
- Proven utility project management experience, specifically within substation or transmission environments.
- Core technical understanding of Transmission & Substation (T&S) equipment.
- Extensive knowledge of construction and commissioning sequences.
- Hands-on experience managing physical construction projects.
- Strong communication skills for effective team and stakeholder coordination.
Preferred Skills & Experience
- PMP is highly preferred
- Experience specifically with Transmission level Protection and Control replacement.
- High-level awareness of outage and system operations within a utility framework.
- Ability to work effectively within a large team environment
Not Specified
J
Project Manager
Salary not disclosed
Position Overview
The Project Manager is responsible for leading, planning, executing, and delivering projects on time, within scope and customer requirements. This role coordinates cross-functional teams, manages resources, and ensures alignment with organizational objectives while maintaining clear communication with customers and internal stakeholders.
Location
This position is based on-site at our Addison Illinois factory and requires presence in the factory five days per week to collaborate directly with production, engineering, supply chain and quality teams.
This role is not eligible for visa sponsorship. Only candidates who do not require sponsorship now or in the future will be considered.
Key Responsibilities
Project Planning & Execution
Education & Experience
Job Reporting: Commercial Organization
Job Level: Individual Contributor
Schedule: Full-time
Does this position offer relocation? Yes
Travel: Potentially, 10 % of the Time
The Project Manager is responsible for leading, planning, executing, and delivering projects on time, within scope and customer requirements. This role coordinates cross-functional teams, manages resources, and ensures alignment with organizational objectives while maintaining clear communication with customers and internal stakeholders.
Location
This position is based on-site at our Addison Illinois factory and requires presence in the factory five days per week to collaborate directly with production, engineering, supply chain and quality teams.
This role is not eligible for visa sponsorship. Only candidates who do not require sponsorship now or in the future will be considered.
Key Responsibilities
Project Planning & Execution
- Develop comprehensive project plans, schedules, and resource allocations.
- Define project scope, goals, milestones, and deliverables in alignment with project success.
- Manage project lifecycle from order hand-off through closeout, ensuring timely execution and customer satisfaction.
- Lead cross-functional teams and facilitate effective communication among engineering, operations, sales, procurement, and external partners.
- Assign tasks, set expectations, and provide guidance to ensure successful execution.
- Conduct regular project meetings and provide status updates.
- Identify potential risks and create mitigation strategies.
- Track project issues and drive timely resolution.
- Manage scope changes through structured change order processes.
- Serve as primary point of contact for project stakeholders and customers.
- Build and maintain strong relationships through timely communication and transparent updates.
- Ensure customer requirements are captured, understood, and delivered.
- Ensure project deliverables meet engineering, safety, and regulatory standards.
- Conduct project reviews and post-project evaluations to drive continuous improvement.
Education & Experience
- Bachelor’s degree in engineering, business, construction management, or technical field.
- 3–7 years of project management experience preferred. Experience in managing electrical distribution equipment is desired.
- PMP, CAPM, or similar certification is a plus.
- Strong organizational and time-management skills.
- Excellent communication and interpersonal abilities.
- Proficiency with project management tools (SEG building a custom tool now)
- Ability to lead teams and influence without direct report responsibility.
- Strong Microsoft Excel skills and overall proficiency with data analysis and reporting tools (e.g., Google Sheets, ERP exports, Power BI preferred).
- Strong analytical and problem-solving skills.
- Ability to manage multiple projects and deadlines in a fast-paced environment.
Job Reporting: Commercial Organization
Job Level: Individual Contributor
Schedule: Full-time
Does this position offer relocation? Yes
Travel: Potentially, 10 % of the Time
- Johnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law.
Not Specified
Senior Manager, Manufacturing Test Development - Austin or Remote US (WASHINGTON)
Salary not disclosed
Senior Manager, Manufacturing Test Development - based onsite in Austin, TX or Remote US.
Jabil is seeking a Senior Manager, Manufacturing Test Development for our Austin, TX location who will directly contribute to the transformative growth within our Intelligent Infrastructure division by applying unique and innovative approaches to developing end customer product solutions.
You will be responsible for managing the technical direction of Rack scale test software and integration development programs through the lens of the customer, factory, and services. You will also be responsible for partnering and collaborating with Hyperscale & AI customers, strategic suppliers, internal engineering, product management, program management, manufacturing, test and quality teams to ensure your products meet the rigorous standards and performance expectations of Jabil’s world-class manufacturing environments and our customers.
What can you expect to do?
LEADERSHIP RESPONSIBILITIES
- Responsible for ensuring the delivery of all manufacturing test solutions for new and sustaining programs for rack-scale AI/ML and GPGPU and hardware accelerator-based server and storage platforms.
- Accountable for all onsite customer delivery commissioning tests as an extension of the manufacturing test capability.
- Strong ability to organize teams and drive the solution for multiple, complex problems cross-functionally and within various areas of technical expertise (hardware, software, firmware, performance, interoperability, etc.)
- Charged with ensuring the right level of execution discipline and engineering rigor is applied to all technical program deliverables – must lead by example.
- Empowered to make key decisions with respect to quality and features that may impact customer experience.
- Capable of influencing individuals, teams and executives to the level necessary to support delivery of programs within schedule, scope and budget boundaries.
- Able to understand how technical decisions impact the broader business, factories and customers and use these insights to lead the broader organization to optimized outcomes.
- Must be extremely detailed oriented while at the same time able to communicate complex issues in simple, actionable terms at all levels within the organization.
- Must possess a strong balance of technical skills, experience-based judgment and business acumen in all execution and decision-making activities.
- Strong ability to develop, grow and maintain healthy interpersonal relationships with peers, team members, executive leadership, customers and external partners at all times.
- Provide thought leadership and direct engineering support to multiple manufacturing sites in the areas of product, component and supplier expertise.
- Exchange knowledge and information with other Jabil facilities to ensure best practices are both shared and implemented throughout the Jabil organization.
- Guide technical and operational teams towards the successful resolution of complex and/or systemic product, process and material issues through the application of rigorous analytical methods.
- Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines).
FUNCTIONAL RESPONSIBILITIES
- Primary technical interface for manufacturing rack test development efforts from concept through delivery.
- Own driving resolution of all issues regarding test solutions aligned with critical path.
- Reviewer and approver of technical risks, and contingency/mitigation plans.
- Can review and provide input to material plans, test plans, test reports, lessons learned.
- Owns preventative actions so gaps in E2E process or capability are addressed long-term.
- Accountable for managing manufacturing technical and quality excursions through indirect coordination and hands-on engineering analysis as it pertains to your test deliverables.
- Provide technical and product subject matter expertise to the factories and customers.
- Lead highly technical and innovative RFI/RFQ responses supporting new strategic and recurring business opportunities.
KNOWLEDGE REQUIREMENTS
- Strong technical program management skills. Able to lead and direct a broad cross-functional global team.
- Exceptional knowledge and experience regarding product development processes and tools.
- Experience and deep level of understanding of server, storage, networking and GPGPU and PCIe-based accelerator architectures.
- Working knowledge of OS, driver, firmware and hardware architecture, device interactions and ability to leverage expertise to determine root cause that lead to optimized solutions.
- Deep experience in process development and process improvement. Able to lead the development of complex processes spanning multiple functions and areas of expertise.
What is the experience needed to be successful in this role?
- BS degree in Electrical/Computer Engineering, Computer Science or related field is required; MS is preferred.
- 8+ years' experience in a software or hardware product development environment with enterprise server, storage or networking products is required.
- Excellent verbal and written communication skills.
- Prior experience directly or indirectly managing engineering and/or development teams.
- Experience managing remote, multi-national and geographically dispersed development teams.
- Domestic and/or international travel, up to 30%, may be required.
Benefits Package with Jabil
Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:
- Competitive Base Salary
- Annual Bonus
- Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
- 401K Match
- Employee Stock Purchase Plan
- Paid Time Off
- Tuition Reimbursement
- Life, AD&D, and Disability Insurance
- Commuter Benefits
- Employee Assistance Program
- Pet Insurance
- Adoption Assistance
- Annual Merit Increases
- Community Volunteer Opportunities
Remote working/work at home options are available for this role.
Jabil is seeking a Senior Manager, Manufacturing Test Development for our Austin, TX location who will directly contribute to the transformative growth within our Intelligent Infrastructure division by applying unique and innovative approaches to developing end customer product solutions.
You will be responsible for managing the technical direction of Rack scale test software and integration development programs through the lens of the customer, factory, and services. You will also be responsible for partnering and collaborating with Hyperscale & AI customers, strategic suppliers, internal engineering, product management, program management, manufacturing, test and quality teams to ensure your products meet the rigorous standards and performance expectations of Jabil’s world-class manufacturing environments and our customers.
What can you expect to do?
LEADERSHIP RESPONSIBILITIES
- Responsible for ensuring the delivery of all manufacturing test solutions for new and sustaining programs for rack-scale AI/ML and GPGPU and hardware accelerator-based server and storage platforms.
- Accountable for all onsite customer delivery commissioning tests as an extension of the manufacturing test capability.
- Strong ability to organize teams and drive the solution for multiple, complex problems cross-functionally and within various areas of technical expertise (hardware, software, firmware, performance, interoperability, etc.)
- Charged with ensuring the right level of execution discipline and engineering rigor is applied to all technical program deliverables – must lead by example.
- Empowered to make key decisions with respect to quality and features that may impact customer experience.
- Capable of influencing individuals, teams and executives to the level necessary to support delivery of programs within schedule, scope and budget boundaries.
- Able to understand how technical decisions impact the broader business, factories and customers and use these insights to lead the broader organization to optimized outcomes.
- Must be extremely detailed oriented while at the same time able to communicate complex issues in simple, actionable terms at all levels within the organization.
- Must possess a strong balance of technical skills, experience-based judgment and business acumen in all execution and decision-making activities.
- Strong ability to develop, grow and maintain healthy interpersonal relationships with peers, team members, executive leadership, customers and external partners at all times.
- Provide thought leadership and direct engineering support to multiple manufacturing sites in the areas of product, component and supplier expertise.
- Exchange knowledge and information with other Jabil facilities to ensure best practices are both shared and implemented throughout the Jabil organization.
- Guide technical and operational teams towards the successful resolution of complex and/or systemic product, process and material issues through the application of rigorous analytical methods.
- Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines).
FUNCTIONAL RESPONSIBILITIES
- Primary technical interface for manufacturing rack test development efforts from concept through delivery.
- Own driving resolution of all issues regarding test solutions aligned with critical path.
- Reviewer and approver of technical risks, and contingency/mitigation plans.
- Can review and provide input to material plans, test plans, test reports, lessons learned.
- Owns preventative actions so gaps in E2E process or capability are addressed long-term.
- Accountable for managing manufacturing technical and quality excursions through indirect coordination and hands-on engineering analysis as it pertains to your test deliverables.
- Provide technical and product subject matter expertise to the factories and customers.
- Lead highly technical and innovative RFI/RFQ responses supporting new strategic and recurring business opportunities.
KNOWLEDGE REQUIREMENTS
- Strong technical program management skills. Able to lead and direct a broad cross-functional global team.
- Exceptional knowledge and experience regarding product development processes and tools.
- Experience and deep level of understanding of server, storage, networking and GPGPU and PCIe-based accelerator architectures.
- Working knowledge of OS, driver, firmware and hardware architecture, device interactions and ability to leverage expertise to determine root cause that lead to optimized solutions.
- Deep experience in process development and process improvement. Able to lead the development of complex processes spanning multiple functions and areas of expertise.
What is the experience needed to be successful in this role?
- BS degree in Electrical/Computer Engineering, Computer Science or related field is required; MS is preferred.
- 8+ years' experience in a software or hardware product development environment with enterprise server, storage or networking products is required.
- Excellent verbal and written communication skills.
- Prior experience directly or indirectly managing engineering and/or development teams.
- Experience managing remote, multi-national and geographically dispersed development teams.
- Domestic and/or international travel, up to 30%, may be required.
Benefits Package with Jabil
Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:
- Competitive Base Salary
- Annual Bonus
- Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
- 401K Match
- Employee Stock Purchase Plan
- Paid Time Off
- Tuition Reimbursement
- Life, AD&D, and Disability Insurance
- Commuter Benefits
- Employee Assistance Program
- Pet Insurance
- Adoption Assistance
- Annual Merit Increases
- Community Volunteer Opportunities
Remote working/work at home options are available for this role.
temporary
Sr. Principal Electrical Integration Engineer - Data Center (Remote) (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Sr. Principal Electrical Design Engineer
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
Jabil has an exciting opportunity for a highly experienced and technically proficient Principal Electrical Engineer to engage in the design, fabrication, and integration of electrical systems for data center power and cooling products, as well as factory enablement projects. This role includes full-stack electrical design from generator systems to AI rack integration zones, with a focus on PDUs, UPS systems, MV/HV power distribution, phased power infrastructure, and controls architecture. The ideal candidate will bring deep technical expertise and a passion for delivering scalable, reliable, and compliant infrastructure solutions.
The Sr. Principal Electrical Integration Engineer will manage and oversee the electrical systems essential for the data center, energy storage systems, and HVAC applications. This role will involve developing specifications, selecting key components, routing wires and cables, establishing connections, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
Product & System Design:
- Knowledge of high-efficiency power conversion and point-of-load regulation for AI/ML server racks (BBU, rPDU).
- Understanding of rack power zoning, load balancing, and redundancy strategies for tiered compute workloads.
- Ensure electrical systems are properly integrated into fabricated enclosures and structural assemblies.
- Lead the electrical design and integration of UPS systems, power conversion units, and safety interlocks.
- Develop and maintain single-line and three-line diagrams for power distribution systems, ensuring clarity, accuracy, and compliance with NEC, IEEE, and UL standards.
- Design and validate three-phase power systems, including load balancing, fault protection, and redundancy strategies for high-availability environments.
- Engineer and integrate medium-voltage (MV) and high-voltage (HV) power distribution components such as switchgear, transformers, busways, and protective relays.
- Specify and qualify electrical components including circuit breakers, contactors, CTs/PTs, surge protection devices, isolation switches for MV/HV applications and the design and development of wiring harnesses
Factory & Facility Integration:
- Design end-to-end electrical distribution systems from generator and utility interface to AI rack integration zones.
- Coordinate with cross functional teams to ensure electrical infrastructure aligns with facility layout, safety codes, and operational requirements.
- Plan and implement power redundancy, load segmentation, and scalable distribution architectures to support high-density compute environments.
- Ensure proper grounding, EMI shielding, and thermal management across all facility-level electrical systems.
Fabrication & Implementation:
- Define fabrication processes including panel building, cable routing, and system integration, ensuring manufacturability and serviceability.
- Perform electrical load calculations, short-circuit analysis, arc flash studies, and thermal modeling using tools such as ETAP, SKM PowerTools, or EasyPower.
- Lead design reviews, risk assessments, and validation testing to ensure compliance with UL, IEC, NEC, CE, RoHS, and REACH standards.
- Interface with suppliers and customers resolve fabrication and quality issues, and ensure adherence to specifications.
- Support prototype builds, field deployments, and customer engagements to gather feedback and refine designs.
Controls Architecture:
- Develop and implement electrical controls architecture for power and cooling systems, including PLCs, SCADA integration, and remote monitoring capabilities.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Collaborate with software and automation teams to ensure seamless integration of control systems with facility and product-level infrastructure.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
Leadership & Documentation:
- Develop and maintain engineering documentation including BOMs, test procedures, and engineering change orders (ECOs).
- Mentor junior engineers and provide technical leadership across cross-functional teams.
- Drive continuous improvement initiatives focused on cost reduction, design for manufacturability (DFM), and product scalability
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or related engineering discipline.
Experience:
- 10+ years of experience in electrical design and fabrication, with a focus on data center or industrial power systems
- Proficiency in ECAD tools (AutoCAD Electrical, EPLAN, SolidWorks Electrical) and integration with mechanical CAD platforms
- Strong understanding of MV/HV power distribution, lithium-ion UPS systems, and three-phase electrical infrastructure
- Experience with electrical analysis tools (ETAP, SKM PowerTools, EasyPower)
- Proven experience in facility-level electrical design and construction support and Excellent leadership, communication, and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
Preferred Qualifications:
- Master’s Degree in Electrical Engineering
- Active Professional Engineer (PE) license
- Experience with data center infrastructure: UPS systems, switchgear, CRAC units, and PDUs
- Familiarity with global compliance standards: UL, CE, RoHS, REACH, and IEEE.
- Hands-on experience with panel fabrication, wiring, and system integration
- Knowledge of thermal and mechanical constraints in electrical enclosure design and experience working with global suppliers and contract manufacturers
- Experience in WindChill and DevOps
Remote working/work at home options are available for this role.
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
Jabil has an exciting opportunity for a highly experienced and technically proficient Principal Electrical Engineer to engage in the design, fabrication, and integration of electrical systems for data center power and cooling products, as well as factory enablement projects. This role includes full-stack electrical design from generator systems to AI rack integration zones, with a focus on PDUs, UPS systems, MV/HV power distribution, phased power infrastructure, and controls architecture. The ideal candidate will bring deep technical expertise and a passion for delivering scalable, reliable, and compliant infrastructure solutions.
The Sr. Principal Electrical Integration Engineer will manage and oversee the electrical systems essential for the data center, energy storage systems, and HVAC applications. This role will involve developing specifications, selecting key components, routing wires and cables, establishing connections, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
Product & System Design:
- Knowledge of high-efficiency power conversion and point-of-load regulation for AI/ML server racks (BBU, rPDU).
- Understanding of rack power zoning, load balancing, and redundancy strategies for tiered compute workloads.
- Ensure electrical systems are properly integrated into fabricated enclosures and structural assemblies.
- Lead the electrical design and integration of UPS systems, power conversion units, and safety interlocks.
- Develop and maintain single-line and three-line diagrams for power distribution systems, ensuring clarity, accuracy, and compliance with NEC, IEEE, and UL standards.
- Design and validate three-phase power systems, including load balancing, fault protection, and redundancy strategies for high-availability environments.
- Engineer and integrate medium-voltage (MV) and high-voltage (HV) power distribution components such as switchgear, transformers, busways, and protective relays.
- Specify and qualify electrical components including circuit breakers, contactors, CTs/PTs, surge protection devices, isolation switches for MV/HV applications and the design and development of wiring harnesses
Factory & Facility Integration:
- Design end-to-end electrical distribution systems from generator and utility interface to AI rack integration zones.
- Coordinate with cross functional teams to ensure electrical infrastructure aligns with facility layout, safety codes, and operational requirements.
- Plan and implement power redundancy, load segmentation, and scalable distribution architectures to support high-density compute environments.
- Ensure proper grounding, EMI shielding, and thermal management across all facility-level electrical systems.
Fabrication & Implementation:
- Define fabrication processes including panel building, cable routing, and system integration, ensuring manufacturability and serviceability.
- Perform electrical load calculations, short-circuit analysis, arc flash studies, and thermal modeling using tools such as ETAP, SKM PowerTools, or EasyPower.
- Lead design reviews, risk assessments, and validation testing to ensure compliance with UL, IEC, NEC, CE, RoHS, and REACH standards.
- Interface with suppliers and customers resolve fabrication and quality issues, and ensure adherence to specifications.
- Support prototype builds, field deployments, and customer engagements to gather feedback and refine designs.
Controls Architecture:
- Develop and implement electrical controls architecture for power and cooling systems, including PLCs, SCADA integration, and remote monitoring capabilities.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Collaborate with software and automation teams to ensure seamless integration of control systems with facility and product-level infrastructure.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
Leadership & Documentation:
- Develop and maintain engineering documentation including BOMs, test procedures, and engineering change orders (ECOs).
- Mentor junior engineers and provide technical leadership across cross-functional teams.
- Drive continuous improvement initiatives focused on cost reduction, design for manufacturability (DFM), and product scalability
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or related engineering discipline.
Experience:
- 10+ years of experience in electrical design and fabrication, with a focus on data center or industrial power systems
- Proficiency in ECAD tools (AutoCAD Electrical, EPLAN, SolidWorks Electrical) and integration with mechanical CAD platforms
- Strong understanding of MV/HV power distribution, lithium-ion UPS systems, and three-phase electrical infrastructure
- Experience with electrical analysis tools (ETAP, SKM PowerTools, EasyPower)
- Proven experience in facility-level electrical design and construction support and Excellent leadership, communication, and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
Preferred Qualifications:
- Master’s Degree in Electrical Engineering
- Active Professional Engineer (PE) license
- Experience with data center infrastructure: UPS systems, switchgear, CRAC units, and PDUs
- Familiarity with global compliance standards: UL, CE, RoHS, REACH, and IEEE.
- Hands-on experience with panel fabrication, wiring, and system integration
- Knowledge of thermal and mechanical constraints in electrical enclosure design and experience working with global suppliers and contract manufacturers
- Experience in WindChill and DevOps
Remote working/work at home options are available for this role.
temporary
Senior Manager, Manufacturing Test Development - Austin or Remote US (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Senior Manager, Manufacturing Test Development - based onsite in Austin, TX or Remote US.
Jabil is seeking a Senior Manager, Manufacturing Test Development for our Austin, TX location who will directly contribute to the transformative growth within our Intelligent Infrastructure division by applying unique and innovative approaches to developing end customer product solutions.
You will be responsible for managing the technical direction of Rack scale test software and integration development programs through the lens of the customer, factory, and services. You will also be responsible for partnering and collaborating with Hyperscale & AI customers, strategic suppliers, internal engineering, product management, program management, manufacturing, test and quality teams to ensure your products meet the rigorous standards and performance expectations of Jabil’s world-class manufacturing environments and our customers.
What can you expect to do?
LEADERSHIP RESPONSIBILITIES
- Responsible for ensuring the delivery of all manufacturing test solutions for new and sustaining programs for rack-scale AI/ML and GPGPU and hardware accelerator-based server and storage platforms.
- Accountable for all onsite customer delivery commissioning tests as an extension of the manufacturing test capability.
- Strong ability to organize teams and drive the solution for multiple, complex problems cross-functionally and within various areas of technical expertise (hardware, software, firmware, performance, interoperability, etc.)
- Charged with ensuring the right level of execution discipline and engineering rigor is applied to all technical program deliverables – must lead by example.
- Empowered to make key decisions with respect to quality and features that may impact customer experience.
- Capable of influencing individuals, teams and executives to the level necessary to support delivery of programs within schedule, scope and budget boundaries.
- Able to understand how technical decisions impact the broader business, factories and customers and use these insights to lead the broader organization to optimized outcomes.
- Must be extremely detailed oriented while at the same time able to communicate complex issues in simple, actionable terms at all levels within the organization.
- Must possess a strong balance of technical skills, experience-based judgment and business acumen in all execution and decision-making activities.
- Strong ability to develop, grow and maintain healthy interpersonal relationships with peers, team members, executive leadership, customers and external partners at all times.
- Provide thought leadership and direct engineering support to multiple manufacturing sites in the areas of product, component and supplier expertise.
- Exchange knowledge and information with other Jabil facilities to ensure best practices are both shared and implemented throughout the Jabil organization.
- Guide technical and operational teams towards the successful resolution of complex and/or systemic product, process and material issues through the application of rigorous analytical methods.
- Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines).
FUNCTIONAL RESPONSIBILITIES
- Primary technical interface for manufacturing rack test development efforts from concept through delivery.
- Own driving resolution of all issues regarding test solutions aligned with critical path.
- Reviewer and approver of technical risks, and contingency/mitigation plans.
- Can review and provide input to material plans, test plans, test reports, lessons learned.
- Owns preventative actions so gaps in E2E process or capability are addressed long-term.
- Accountable for managing manufacturing technical and quality excursions through indirect coordination and hands-on engineering analysis as it pertains to your test deliverables.
- Provide technical and product subject matter expertise to the factories and customers.
- Lead highly technical and innovative RFI/RFQ responses supporting new strategic and recurring business opportunities.
KNOWLEDGE REQUIREMENTS
- Strong technical program management skills. Able to lead and direct a broad cross-functional global team.
- Exceptional knowledge and experience regarding product development processes and tools.
- Experience and deep level of understanding of server, storage, networking and GPGPU and PCIe-based accelerator architectures.
- Working knowledge of OS, driver, firmware and hardware architecture, device interactions and ability to leverage expertise to determine root cause that lead to optimized solutions.
- Deep experience in process development and process improvement. Able to lead the development of complex processes spanning multiple functions and areas of expertise.
What is the experience needed to be successful in this role?
- BS degree in Electrical/Computer Engineering, Computer Science or related field is required; MS is preferred.
- 8+ years' experience in a software or hardware product development environment with enterprise server, storage or networking products is required.
- Excellent verbal and written communication skills.
- Prior experience directly or indirectly managing engineering and/or development teams.
- Experience managing remote, multi-national and geographically dispersed development teams.
- Domestic and/or international travel, up to 30%, may be required.
Benefits Package with Jabil
Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:
- Competitive Base Salary
- Annual Bonus
- Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
- 401K Match
- Employee Stock Purchase Plan
- Paid Time Off
- Tuition Reimbursement
- Life, AD&D, and Disability Insurance
- Commuter Benefits
- Employee Assistance Program
- Pet Insurance
- Adoption Assistance
- Annual Merit Increases
- Community Volunteer Opportunities
Remote working/work at home options are available for this role.
Jabil is seeking a Senior Manager, Manufacturing Test Development for our Austin, TX location who will directly contribute to the transformative growth within our Intelligent Infrastructure division by applying unique and innovative approaches to developing end customer product solutions.
You will be responsible for managing the technical direction of Rack scale test software and integration development programs through the lens of the customer, factory, and services. You will also be responsible for partnering and collaborating with Hyperscale & AI customers, strategic suppliers, internal engineering, product management, program management, manufacturing, test and quality teams to ensure your products meet the rigorous standards and performance expectations of Jabil’s world-class manufacturing environments and our customers.
What can you expect to do?
LEADERSHIP RESPONSIBILITIES
- Responsible for ensuring the delivery of all manufacturing test solutions for new and sustaining programs for rack-scale AI/ML and GPGPU and hardware accelerator-based server and storage platforms.
- Accountable for all onsite customer delivery commissioning tests as an extension of the manufacturing test capability.
- Strong ability to organize teams and drive the solution for multiple, complex problems cross-functionally and within various areas of technical expertise (hardware, software, firmware, performance, interoperability, etc.)
- Charged with ensuring the right level of execution discipline and engineering rigor is applied to all technical program deliverables – must lead by example.
- Empowered to make key decisions with respect to quality and features that may impact customer experience.
- Capable of influencing individuals, teams and executives to the level necessary to support delivery of programs within schedule, scope and budget boundaries.
- Able to understand how technical decisions impact the broader business, factories and customers and use these insights to lead the broader organization to optimized outcomes.
- Must be extremely detailed oriented while at the same time able to communicate complex issues in simple, actionable terms at all levels within the organization.
- Must possess a strong balance of technical skills, experience-based judgment and business acumen in all execution and decision-making activities.
- Strong ability to develop, grow and maintain healthy interpersonal relationships with peers, team members, executive leadership, customers and external partners at all times.
- Provide thought leadership and direct engineering support to multiple manufacturing sites in the areas of product, component and supplier expertise.
- Exchange knowledge and information with other Jabil facilities to ensure best practices are both shared and implemented throughout the Jabil organization.
- Guide technical and operational teams towards the successful resolution of complex and/or systemic product, process and material issues through the application of rigorous analytical methods.
- Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines).
FUNCTIONAL RESPONSIBILITIES
- Primary technical interface for manufacturing rack test development efforts from concept through delivery.
- Own driving resolution of all issues regarding test solutions aligned with critical path.
- Reviewer and approver of technical risks, and contingency/mitigation plans.
- Can review and provide input to material plans, test plans, test reports, lessons learned.
- Owns preventative actions so gaps in E2E process or capability are addressed long-term.
- Accountable for managing manufacturing technical and quality excursions through indirect coordination and hands-on engineering analysis as it pertains to your test deliverables.
- Provide technical and product subject matter expertise to the factories and customers.
- Lead highly technical and innovative RFI/RFQ responses supporting new strategic and recurring business opportunities.
KNOWLEDGE REQUIREMENTS
- Strong technical program management skills. Able to lead and direct a broad cross-functional global team.
- Exceptional knowledge and experience regarding product development processes and tools.
- Experience and deep level of understanding of server, storage, networking and GPGPU and PCIe-based accelerator architectures.
- Working knowledge of OS, driver, firmware and hardware architecture, device interactions and ability to leverage expertise to determine root cause that lead to optimized solutions.
- Deep experience in process development and process improvement. Able to lead the development of complex processes spanning multiple functions and areas of expertise.
What is the experience needed to be successful in this role?
- BS degree in Electrical/Computer Engineering, Computer Science or related field is required; MS is preferred.
- 8+ years' experience in a software or hardware product development environment with enterprise server, storage or networking products is required.
- Excellent verbal and written communication skills.
- Prior experience directly or indirectly managing engineering and/or development teams.
- Experience managing remote, multi-national and geographically dispersed development teams.
- Domestic and/or international travel, up to 30%, may be required.
Benefits Package with Jabil
Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:
- Competitive Base Salary
- Annual Bonus
- Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
- 401K Match
- Employee Stock Purchase Plan
- Paid Time Off
- Tuition Reimbursement
- Life, AD&D, and Disability Insurance
- Commuter Benefits
- Employee Assistance Program
- Pet Insurance
- Adoption Assistance
- Annual Merit Increases
- Community Volunteer Opportunities
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Integration Engineer – DCI Pipes, Frames and Structures (REMOTE) (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Senior Mechanical Systems Engineer - Remote Structures and Piping (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
jobs by
✓ All jobs loaded