Engineering Jobs in Hialeah Fl Remote
271 positions found — Page 10
A Senior Test Engineer job in Miramar, FL 33027 is currently available through Belcan at one of our key aerospace clients. This is a four‑month contract role with the potential to convert to a direct hire. To be considered for this role the candidate will need to have 3-5 years of relevant experience.
Description
The Test Design Engineer is responsible for creating and performing test automation activities consistent with the test lead and test development goals/objectives. This role requires knowledge/experience with automated test software, manufacturing test environment and the ability to interpret test requirements, implement requirement-based test methodologies and trouble shoot & debug test and product issues. Experience with FAA Part 145 in an MRO environment highly desired.
Job Duties:
Specific duties will include:
SW/HW debug, troubleshoot, upgrade and maintain product automated test equipment.
Requirements Analysis/Review for test-ability
Test procedure development, implementation, execution and failure root cause analysis.
Test planning and preparation.
Assess System performance against requirements
Develop code in Veristand, Teststand, LabVIEW to implement test GUIs, drivers and test requirements.
Perform verification and validation testing on developed Automated Test Equipment (ATE).
Perform sub-system testing from bench level CCA functional testing to system level burn in testing against an ATP/QTP.
Develop and refine system and board level test cases and procedures.
Trouble shoot subsystem and system level failures to root cause.
Design test fixtures & cables to enable testing.
Perform verification and validation testing on developed Automated Test Equipment (ATE).
Bench test CCAs and test electronic sub-assemblies and rack based test systems (instruments, cables and interfaces).
Trouble shoot subsystem and system level failures to root cause.
Gather, configure and use appropriate test equipment to perform task - Power supplies, DVM, Oscilloscope, electronic loads, custom cables, etc.
Interpret test requirements and electrical test results.
Read electrical schematics.
Test planning, preparation & execution
Required Qualifications:
3 to 5 years of experience
Strong interpersonal skills
Strong analytical skills
B.S. or M.S. in Electrical Engineering, Electrical Engineering Technology, or related discipline desired
Will consider equivalent years of relevant experience in lieu of a formal degree
Experience working with or developing Automated Test Equipment (ATE).
Experience in hardware and test equipment troubleshooting experience.
Knowledge of test automation (HIL) using National Instruments Labview, TestStand and Veristand
Can operate independently
Desired Skills:
Excellent verbal and written communication skills.
Experience working independently and in a collaborative environment
Ability to react to project adjustments and alterations promptly and efficiently
Ability to effectively prioritize and execute tasks in a high-pressure environment
Familiarity with electronic components and common electronic test equipment.
Experienced using lab test equipment, power supplies, DVM, Oscilloscope, electronic loads
Ability to interpret test requirements and electrical test results.
Ability to conduct detailed failure analysis and develop and implement root cause corrective actions.
Experience with GIT, Tortoise SVN, or equivalent software configuration management tools
Previous experience with CAN, UDS, RS232, RS422 & 1553 communication protocols.
Previous experience with programming languages such as C, C++ & C#.
Previous experience with Visual Studio.
Compensation:
This position is offering an salary rate of $52.88 - $62.50/hr, however, Belcan considers several factors when extending an offer, including but not limited to education, experience, geographic location, and discipline. Benefits offered may include health care, dental, vision, life insurance; 401(k); education assistance; paid time off including PTO, holidays, and any other paid leave required by law.
Belcan is an equal opportunity employer. Your application and candidacy will not be considered based on race, color, sex, religion, creed, sexual orientation, gender identity, national origin, disability, genetic information, pregnancy, veteran status or any other characteristic protected by federal, state or local laws.
Position Overview
The Sales Director will be responsible for developing and executing sales strategies for mortar and drymix products (sand & powder materials) across the U.S., with a focus on market expansion, distributor development, and key account management. This role will be based in the Miami, Florida area and will play a critical role in building the company’s presence in the North American construction materials market.
Key Responsibilities
- Develop and implement sales strategies to drive revenue growth for mortar and drymix products in the U.S. market
- Identify and develop distributors, contractors, and key accounts within the construction materials industry
- Build and maintain strong relationships with contractors, builders, and building material distributors
- Lead and manage regional sales activities, including pricing strategy, contract negotiation, and sales forecasting
- Conduct market analysis to identify new business opportunities and competitive positioning
- Collaborate with marketing, product, and operations teams to support product launches and market development
- Build and lead a local sales team as the business expands
- Represent the company at industry events, trade shows, and customer meetings
Qualifications
- Bachelor’s degree or above in Business, Marketing, Engineering, or related fields
- 8+ years of sales experience in construction materials, with strong preference for mortar, drymix, cement-based materials, tile adhesives, or related sand/powder products
- Proven track record of achieving sales targets and expanding distribution networks in the U.S. market
- Strong understanding of the construction materials industry and distribution channels
- Experience working with contractors, builders, and building material suppliers
- Excellent communication, negotiation, and leadership skills
- Ability to travel as required within the U.S.
Fortis Design Build is a real estate development company in South Florida focusing on mixed-use development, multifamily, commercial with about 4 million SF currently in design or under construction. Fortis is looking for a team member that can fulfill the below responsibilities successfully. We are looking for someone who is self-motivated, ambitious, organized, possess strong management skills, attention to detail and a sense of urgency for critical deadlines. We strive to provide a collaborative, creative environment where each individual is encouraged to contribute to our overall processes, decisions, planning, and culture. Fortis offers a collaborative work environment with a very attractive compensation package with bonuses, wellness packages and potential investment opportunities.
Responsibilities:
Development Management
- Oversee the full lifecycle of real estate development projects from concept through completion.
- Conduct due diligence and feasibility analysis for potential acquisitions or development opportunities.
- Coordinate with legal, finance, and acquisitions teams to structure deals, obtain entitlements, and ensure project viability.
- Manage consultants, architects, engineers, and permitting authorities throughout predevelopment phases.
- Participate in the rezoning and entitlements process when necessary.
- Manage the approval and permitting phase of the development process and ensure approvals are in line with company requirements.
- Manage the design phase of projects, ensuring adherence to our standards and the established budget.
- Coordinate with, and manage, the design team to ensure the timely and on-budget completion of all plan sets.
- Prepare and monitor development budgets, schedules, and pro formas.
Construction Management
- Lead general contractor selection process and negotiate construction contracts.
- Monitor construction activities to ensure adherence to plans, budget, and schedule.
- Manage relationships with general contractors, subcontractors, and vendors.
- Conduct site inspections, resolve field issues, and ensure quality control and safety compliance.
- Review and approve draw requests, change orders, and project invoices.
Ownership Communication
- Provide regular updates to internal stakeholders, executives, and investors on project status.
- Facilitate cross-functional coordination with finance, legal, asset management, and leasing teams.
- Prepare executive reports, board presentations, and community meeting materials as needed.
Qualifications
- Bachelor’s degree in Real Estate, Construction Management, Architecture, Engineering, or related field; MBA or Master’s preferred.
- 3+ years of experience in real estate development, construction management, or a related field.
- Proven track record of delivering ground-up development and/or major renovation projects on time and within budget.
- Deep knowledge of entitlement processes, permitting, design and construction standards, and project finance.
- Strong financial acumen, including experience with project budgeting, scheduling, and forecasting.
- Excellent communication, leadership, and negotiation skills.
- Proficiency in project management tools (e.g., MS Project, Procore, Smartsheet) and MS Office Suite.
- Strong organizational and communication skills
Propy is revolutionizing the real estate industry by building the world's first AI-powered Title and Escrow platform onchain. We have processed over $5B in transactions, and we are on a mission to make closing on a home as easy as buying a stock.
We combine blockchain for security with advanced AI to automate the heavy lifting of closing documents. We aren't just "using" AI; we are building the infrastructure that allows AI agents to securely manage escrow, eliminate fraud, and run 24/7.
We are looking for a pragmatic Applied AI Engineer to join our engineering team.
The role is not about training models and does not involve academic Machine Learning research. It is about building the rails that make AI usable in a high-stakes financial environment. You will bridge the gap between our robust C#/.NET architecture and the probabilistic world of LLMs.
Title and Escrow is a document-heavy industry with zero room for error. Your mission is to use AI to clean up the messiness of real-world real estate data.
You will solve problems like:
- Structured Data Extraction: Converting messy, unstructured data (like emails, PDFs, documents) from various sources into strictly validated JSON schemas with as close to 100% accuracy as possible.
- Escrow Automation: Designing workflows that reduce human intervention by 50% by intelligently routing tasks based on AI analysis.
- Fraud Detection: Implementing deterministic logic checks on bank and financial documents to detect fraud patterns before they happen.
- Engineer the Integration: Writing production-grade code that interacts with external AI APIs
- "Prompt Engineering" as Code: You won't just write prompts; you will version, test, and optimize them. You will define strict schemas to ensure the AI speaks the language of our internal tools.
- Orchestrate & Validate: Help in building the logic that parses AI responses, validates them against our database (MongoDB), and flags inconsistencies before they reach the user.
- Full-Stack Implementation: Work to visualize AI-aided services and data for user review and approval.
- Collaborate: Work closely with the other senior engineers and product owners to translate complex "Title & Escrow" schemas into technical constraints that an AI can understand.
- Developer DNA: You are a software engineer first. You have strong experience in Python (C# / .NET is an advantage) and understand programming in depth.
- Applied AI Experience: You have integrated LLMs into applications via API. Have experience with not only models but also AI frameworks. Experience with workflows, AI agent building and orchestration. You understand context windows, token limits, temperature, and guardrails.
- Data Handling: Experience with handling complex data structures.
- The "Glue" Mindset: You enjoy writing the code that connects different services ( like the AWS, AI APIs, and Database) to make a seamless features.
- Collaborative Autonomy: You will own the AI domain, but you won't be on an island. You will be embedded in a senior engineering team that supports you with architecture, code reviews, and best practices.
- Experience with AWS infrastructure.
- Familiarity with the US Real Estate, Title, or Escrow process.
- Working in a transparent environment which focuses on solving problems and getting things done.
- The opportunity to work with very smart and driven people.
- The ability to grow your talents and career in a high-growth sector.
- A remuneration package that is based on the candidate's motivation, skills, and experience.
Please submit your resume to this job ad along with a portfolio of your AI-related experience, GitHub account and anything else you find applicable.
Construction Project Scheduler
'We're all Americaribe'. It means that we share the same culture, expertise & refers to the efforts we take every day to make ourselves operate more tightly and agilely. Our pride, achievements, and experiences have all tied to the minds of teamwork, innovation, and novelty. Talented newcomers with creative and technical skill sets like these, along with an energy and enthusiasm that effectively contribute to team morale, are always needed as Americaribe continues to grow. Beyond the high-level benefits and competitive salary is a plethora of opportunity to accentuate your career path, allowing growth from advanced trainings and experience, provided by Americaribe, to build leadership, versatility, & consistency. Americaribe LLC is known for applying its capacity for technical and commercial innovation, cutting-edge engineering skills and expertise in development to offices, hotels, airports, hospitals, schools, housing, exhibition centers, leisure facilities, etc. Americaribe is the subsidiary of Bouygues Bâtiment International, operating in over twenty countries, also known for combining its networks alongside major contracts with highly added value.
POSITION SUMMARY
The Project Scheduler is responsible for developing, maintaining, and monitoring project schedules to ensure construction projects are delivered on time and within budget. This role collaborates closely with project managers, preconstruction managers, estimators, superintendents, subcontractors, and clients to coordinate timelines, monitor progress, identify risks, and recommend corrective actions when necessary.
ESSENTIAL DUTIES AND RESPONSIBILITIES
Schedule Development & Planning
- Develop detailed baseline schedules using tools such as Primavera P6, Microsoft Project, or similar scheduling software, covering all project phases from RFP/Project Launch through Substantial Completion and Final Turnover.
- Create Work Breakdown Structures (WBS) and define project activities, durations, and sequencing.
- Establish logic-driven critical path (CPM) and identify schedule constraints.
- Resource load schedules with quantities, labor, and cost data when required.
- Prepare schedule narratives documenting assumptions and methodologies.
- Collaborate with project managers, preconstruction managers, field teams and estimators during both preconstruction and construction phases.
Schedule Monitoring & Control
- Conduct site visits to assess and document construction progress.
- Update schedules regularly to reflect actual progress.
- Perform critical path analysis and identify variances.
- Develop recovery schedules when delays occur.
- Perform Time Impact Analyses (TIA) to assess the effects of change orders and scope modifications.
Means & Methods
- Define construction means and methods required to achieve schedule objectives.
- Develop site logistics and Maintenance of Traffic (MOT) plans in 2D or 3D formats.
Reporting & Communication
- Prepare and distribute schedule reports, dashboards, executive summaries, and look-ahead schedules.
- Present schedule status updates to internal stakeholders and clients.
- Provide scheduling input for executive reports and owner meetings.
- Maintain documentation to support claims and delay analyses when required.
Risk Management
- Identify schedule-related risks and recommend mitigation strategies.
- Conduct what-if scenario analysis to evaluate alternative approaches.
- Support dispute resolution efforts through detailed time impact analysis.
Collaboration
- Coordinate with project management, engineering, procurement, and subcontractors to ensure schedule alignment.
- Support resource planning and labor forecasting efforts.
- Ensure alignment between field operations and master project schedules.
- Perform other duties as assigned.
QUALIFICATIONS
Education
- Bachelor’s degree in construction management, engineering, or related field (preferred).
Experience
- 3 to 7+ years of experience in construction scheduling or project controls preferably within the US, South Florida or the Caribbean.
- Experience on commercial, industrial, infrastructure, or residential projects.
Technical Skills
- Advanced proficiency in Primavera P6 and Microsoft Project.
- Strong understanding of construction sequencing means and methods.
- Solid knowledge of Critical Path Method (CPM) scheduling.
- Familiarity with cost control, earned value management (EVM) principles
- Ability to use construction resources data to validate productivity rates and activity durations.
- Proficient in Microsoft Office Suite (including Excel), Power BI, Bluebeam is a must.
- Working knowledge of (or willingness to learn) BIM, Revit, AutoCAD, Navisworks, cmBuilder and Synchro 4D.
- Ability to interpret contract documents, drawings, specifications, and scopes of work.
- Ability to perform quick quantity take-offs for scheduling purposes.
Soft Skills
- Strong analytical and problem-solving skills.
- Excellent written and verbal communication skills.
- High level of attention to detail and organizational skills.
- Ability to manage multiple projects simultaneously.
- Experience working with multidisciplinary and multicultural teams.
- Innovative mindset with curiosity toward emerging technologies.
PREFERRED CERTIFICATIONS (OPTIONAL)
- PMI Scheduling Professional (PMI-SP).
- Project Management Professional (PMP).
- Planning & Scheduling Professional (PSP) – AACE.
WORK ENVIRONMENT
- Primarily office-based with regular visits to active construction sites.
- Travel may be required depending on project location.
- Full-time position with occasional extended hours to meet project deadlines.
Americaribe LLC is an Equal Opportunity Employer
We’re expanding into a full 24/7 operation and are hiring across multiple roles and experience levels. Our 12‑hour overnight shift is ideal for someone who enjoys a more independent work environment with more days off each week. You’ll benefit from premium shift differentials, cross‑training opportunities, and the chance to shape processes on a growing team. If you’re someone who prefers working nights or wants to maximize earning potential while enjoying a schedule with fewer total days giving you additional full days off during the week to spend with family, pursue hobbies, or rest, this could be a great fit for you.
Currently hiring Technicians for the below shifts.
Note: Based on the 2-week rotating shift pattern, employees will be scheduled to work 36 hours one week, and 48 hours on the alternate week. In this alternate week, employees will be receiving 8 hours of overtime, resulting in 16 hours of overtime pay in a month.
Shift A– 6pm to 6am 15% shift differential pay
Week 1: Tuesday, Thursday, and Friday
Week 2: Monday, Wednesday, Saturday and Sunday
Shift B – 6pm to 6am 15% shift differential pay
Week 1: Monday, Wednesday, Saturday and Sunday
Week 2: Tuesday, Thursday, and Friday
Shift D – 6pm to 6am 15% shift differential pay
Week 1: Tuesday, Thursday, and Friday
Week 2: Monday, Wednesday, Saturday and Sunday
How will you make an impact!
In this key Manufacturing Engineer Technician onsite role, you will perform preventative maintenance, calibration, change overs in Z-prep area and perform preventive maintenance for tooling (SMT & BE process) and other specialty support equipment used in the manufacturing process.
Location: This role will be based on-site at one of our St. Petersburg Florida Facilities located in Seminole, FL specializing in Renewable Energy
What will you do?
Key Responsibilities
- Operate, monitor, and adjust SMT equipment while ensuring high quality and process stability.
- Perform setups, changeovers, and material verification for each process step.
- Conduct preventive and corrective maintenance on:
- Laser marking systems
- Glue dispensing machines (CAMALOT)
- Screen printers (DEK)
- SPI systems (KOH YOUNG)
- Pick & place machines (FUJI NXT, AIM)
- Reflow ovens (ITW/VITRONIC)
- Troubleshoot and resolve process issues related to solder paste printing, component placement, inspection, and reflow profiling.
- Create, modify, and optimize SMT programs (FUJI, CAMALOT, DEK, etc.).
- Document downtime, maintenance activities, root cause analysis, and improvements.
- Collaborate with Engineering, Quality, and Production to improve OEE, yields, CP/CPK, and reduce rework.
- Ensure compliance with safety standards, ESD controls, and manufacturing best practices.
- Cover overtime requirements as needed.
How will you get here?
Education and Experience:
- Electronics Industry Experience
- High School Diploma or GED preferred not required or equivalent - experience.
- Six months of demonstrated experience, ideally 2 plus years.
- Must have experience with at least one of the below:
- Laser marking systems
- Glue dispensing machines (CAMALOT)
- Screen printers (DEK)
- SPI systems (KOH YOUNG)
- Pick & place machines (FUJI NXT, AIM)
- Reflow ovens (ITW/VITRONIC)
Why Join Jabil?
- Be part of a mission-critical team supporting Renewable Energy innovation.
- Gain hands-on experience with high-precision, advanced technologies.
- Work in a culture focused on quality, safety, and continuous improvement.
- Competitive compensation and a comprehensive benefits package.
Remote working/work at home options are available for this role.
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
Job Family: General Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.
What will you do?
- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed
- Participating in design reviews to ensure accuracy and compliance with requirements
- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control
- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards
- Work closely with engineers and other designers to meet product specifications and performance requirements
- Modify and revise designs to correct operating deficiencies or to reduce production problems
- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.
- Check and validate designs to ensure they meet required quality and safety standards
- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications
- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications
- Designing and creating schematic PLC input/output connections.
- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.
- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team
- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration
- Capable of creating a Bill of Materials (BOM) for release to manufacturing
- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers
- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs
- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required
Experience:
- 6-8 years of experience in electrical design within the power distribution or data center industry.
- Proven experience as a CAD designer, preferably in an electrical engineering environment.
- Proficiency in CAD software (AutoCAD Electrical, Revit).
- Strong understanding of electrical systems, integration strategy, and system coordination
- Excellent problem-solving skills and attention to detail
- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently
Knowledge, Skills, Abilities:
- Strong knowledge of electrical design, manufacturing processes, and material properties.
- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.
- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.
- Excellent interpersonal and communication skills.
- Creative, self-motivated, accountable, and team-oriented.
- Able to work independently with minimal oversight.
- Effective at presenting information and responding to management, clients, and public queries.
- Capable of influencing others and sharing best practices.
- Comfortable working as part of a global team.
- Capable of assessing projects, articulating risks, and developing project milestones.
- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.
Job Family: General Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.
What will you do?
- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed
- Participating in design reviews to ensure accuracy and compliance with requirements
- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control
- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards
- Work closely with engineers and other designers to meet product specifications and performance requirements
- Modify and revise designs to correct operating deficiencies or to reduce production problems
- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.
- Check and validate designs to ensure they meet required quality and safety standards
- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications
- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications
- Designing and creating schematic PLC input/output connections.
- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.
- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team
- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration
- Capable of creating a Bill of Materials (BOM) for release to manufacturing
- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers
- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs
- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required
Experience:
- 6-8 years of experience in electrical design within the power distribution or data center industry.
- Proven experience as a CAD designer, preferably in an electrical engineering environment.
- Proficiency in CAD software (AutoCAD Electrical, Revit).
- Strong understanding of electrical systems, integration strategy, and system coordination
- Excellent problem-solving skills and attention to detail
- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently
Knowledge, Skills, Abilities:
- Strong knowledge of electrical design, manufacturing processes, and material properties.
- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.
- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.
- Excellent interpersonal and communication skills.
- Creative, self-motivated, accountable, and team-oriented.
- Able to work independently with minimal oversight.
- Effective at presenting information and responding to management, clients, and public queries.
- Capable of influencing others and sharing best practices.
- Comfortable working as part of a global team.
- Capable of assessing projects, articulating risks, and developing project milestones.
- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.