Engineering Jobs in Gotha Florida Remote
269 positions found — Page 10
Our client is seeking an experienced Director of Network Operations – Market Lead for a very exciting Direct Hire opportunity with a fast growing company in the telecommunications (Fiber/OSP) industry. This is a hybrid role and requires this person to sit in Orlando or be willing to relocate at their own expense.
Overall Purpose:
- Directs all outside plant engineering, planning, design, and construction activities in a geographical area.
- This is a supervisory role with responsibility for directing; planning; apportioning the market's build responsibilities, including the work of employees including interviewing, selecting, and training; establishing and monitoring attainment of objectives; coaching and assessing performance; and ensuring compliance with company and regulatory policy.
Key Roles and Responsibilities:
- Approves or recommends approval of long and short- range planning, specific and routine authorizations, including plans and specifications.
- Responsible for scheduling of work offers and the managing of the Outside Plant (OSP) budget. Responsible for contract negotiations for the performance of outside plant construction engineering and installation/repair of a specific area.
- Responsible for the operational effectiveness of provisioning OSP facilities relative to customer service activation and assurance.
- Directs and controls capital budget for outside plant for specific market area.
- Oversee the installation and maintenance of high-speed broadband service in assigned geography through general contractor partner.
- The job has direct and indirect supervisory responsibility for employees below Director level.
- Leader will directly manage the work performed by employees, contractors, vendors and or partners.
Education:
Typically, a bachelor's degree in Math, Science or Engineering preferred or relevant industry experience.
Experience:
Typically requires 10 or more years of experience and at least two years of management responsibility.
Supervisory:
Yes.
Environmental Requirements:
This position may be responsible for contributing to compliance with environmental laws and regulations applicable to its job function.
Pay Range: $140-$160k plus bonus depending on experience. The specific compensation for this position will be determined by a number of factors, including the scope, complexity and location of the role as well as the cost of labor in the market; the skills, education, training, credentials and experience of the candidate; and other conditions of employment. Our full-time consultants have access to benefits including medical, dental, vision as well as 401K contributions.
The ideal candidate will be responsible for creating and implementing project and bid strategies. You will do so by analyzing project proposals and historical cost data. Ultimately, your work will help us develop new business opportunities.
Responsibilities
- Attend bid meetings and develop and execute bid strategy
- Prepare thorough and timely cost analysis
- Analyze project proposals to prepare budget and cost estimate
- Gather, update, and review historical cost data
Qualifications
- Bachelor's Degree or equivalent experience in Construction Management or related field of study
- Experience estimating projects or relevant engineering experience
- Proficient in Microsoft Office suite
- 5 years of estimating experience in the commercial G.C. sector
- Experience with bidding projects in the $1-30 million range.
Position Overview:
PTS Advance is seeking an experienced MEP Mechanical Design Engineer to join our growing team. The ideal candidate will have a strong background in mechanical building systems design and proven expertise in Revit for modeling and documentation. You'll play a key role in developing HVAC, plumbing, and piping designs for commercial, industrial, and institutional projects.
Key Responsibilities:
- Design and develop mechanical systems for building projects, including HVAC, plumbing, and piping.
- Create and coordinate 3D models and detailed construction documents using Revit.
- Collaborate with multidisciplinary teams, including architects, electrical engineers, and contractors.
- Perform load calculations, equipment selection, and system layouts.
- Ensure designs meet applicable codes, standards, and client specifications.
- Support project lifecycle from concept through construction administration.
Qualifications:
- Bachelor's degree in Mechanical Engineering or related field.
- 10+ years of experience in MEP mechanical design (commercial or industrial preferred).
- Proficiency in Revit required.
- Strong understanding of mechanical building codes and standards.
- Excellent communication and teamwork skills.
- Professional Engineer (PE) license is a plus.
Title: Account Manager
Location: Orlando, FL
Ready to take charge of key client relationships and drive meaningful business growth?
Join NES Fircroft in Orlando as an Account Manager, where you’ll own client delivery, lead recruitment activity, and play a vital role in expanding our presence across the region. This role is perfect for someone who thrives in a fast-paced, people-first environment and is excited to build lasting connections.
What You’ll Be Doing:
Client Champion: Serve as the primary point of contact for all contract staff—delivering consistent, responsive, first‑class service.
Lead Generator: Identify strong leads, uncover new roles, and feed the Contract Recruitment team with high‑quality vacancies.
Team Driver: Partner closely with recruiters to ensure seamless delivery on all live requisitions and client needs.
Industry Expert: Build your personal brand and become a subject matter expert through networking, client engagement, and industry insights.
Process Improver: Help elevate NES Fircroft’s supplier position by providing competitive insights and identifying process improvements.
Cross‑Functional Collaborator: Work hand‑in‑hand with invoicing, credit control, and compliance teams to keep operations running smoothly.
Bid & Proposal Partner: Support tenders, proposals, and RFIs alongside our commercial team to secure new business.
Global Connector: Collaborate with peers worldwide to develop international business and share best practices that elevate our delivery model.
Growth Accelerator: Proactively identify and develop new revenue streams, service lines, and regional expansion opportunities.
What We’re Looking For:
Industry Experience: 3+ years in Sales, Account Management at a staffing (Oil & Gas experience a plus).
People‑Focused Personality: Outgoing, engaging, and exceptional at building long‑lasting client relationships.
Customer Service Pro: Delivers a top-tier experience with ease, empathy, and professionalism.
Organizational Guru: Detail-oriented, methodical, and excellent at managing multiple priorities.
Target Achiever: Driven to meet and exceed objectives in a fast-paced environment.
Multitasking Master: Comfortable juggling tasks while maintaining quality and accuracy.
Why NES Fircroft?
Financial Stability: Competitive base salary + strong bonus structure.
Time Off: 22 PTO days (increasing with tenure) + 10 paid holidays, festive shutdown (companywide shutdown from Christmas to the new year).
Giving Back: One paid charity day per year, plus volunteering opportunities
Small but Mighty: Free onsite parking.
Career Growth: Training programs & clear progression paths
Culture: Fun, energetic, supportive team environment.
Who Are We?
NES Fircroft isn’t just a staffing agency — we’re a global powerhouse in engineering recruitment, shaping the workforce of tomorrow across Energy, Power, Chemicals, Life Sciences, and more. We innovate, grow, and have fun doing it.
Accessibility & Inclusion
We’re committed to an inclusive workplace and welcome applicants with disabilities and those who are neurodiverse. If you require adjustments during the recruitment process, please let us know — we’re here to support you.
Don’t Meet Every Requirement?
If you’re excited about this role but don’t tick all the boxes, we still encourage you to apply. You may be the perfect fit.
NES Fircroft – Empowering with energy!
About Us // Meet The Team // Follow Us On Youtube!
Date Posted:
2026-01-28Country:
United States of AmericaLocation:
US-AZ-TUCSON-M09 ~ 3350 E Hemisphere Loop ~ BLDG M09Position Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Active and existing security clearance required after day 1At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
The Agile Hardware Solutions (AHS) strives to develop, mature, and deploy advanced product development capabilities across the Hardware Engineering discipline, enabling the business to deliver high quality work products at competitive discriminating velocity & cost.
The Agile Hardware Solutions (AHS) Department is seeking a Mechanical Dimensional Management Engineer, located in Tucson, AZ (Onsite)
Occasional domestic travel may be expected.
The Mechanical Dimensional Management (DM) Engineer is part of the Producibility Team within Agile Hardware Solutions. The DM Engineer collaborates directly with Mechanical Engineering, Materials & Processes and Design & Drafting from the Mechanical Products Team along with Operations, Quality and Supply Chain peers, and suppliers to implement mechanical producibility improvements on new and emerging programs, and upgrades to existing programs.
The team executes tolerance optimization through primarily 3D tolerance and variation analysis and works with the design team to influence the final design. Early engagement in the conceptual stage and throughout the development process will ensure that our designs are optimized with respect to tolerance controls and methods of manufacture. The DM engineer plays an essential part in reducing product cost and ensuring functional quality.
What You Will Do
As a member of the Dimensional Management and Producibility Team, you may support the team in the following ways:
Perform detailed 3D complex dimensional tolerance analyses and review 1D tolerance analyses using various tools to evaluate design requirements of new and existing designs to calculate design margin / capability, and provide recommendations while adhering to cost, schedule, and manufacturing constraints.
Work with product teams to develop coordinated datum flow and document via drawings including interface control drawings (ICDs).
Apply, encode and decode Geometric Dimensioning and Tolerancing (GD&T) on various technical data packages.
Contribute to the development and training of the practical application of GD&T, tolerance analysis methods, and tools.
Where applicable become recognized as the Dimensional Management Lead on a program to coordinate various aspects of the Dimensional Management Closed Loop Process while supporting Critical Item Initiatives.
Function as a self-starter while exercising considerable latitude in determining the strategic objectives and methods of achieving Dimensional Management goals.
Where empowered within a program, offer assistance developing inspection plans for both internal inspection and as required by suppliers for compliance with specifications.
Qualifications You Must Have
Bachelors in Science, Technology, Engineering, or Mathematics (STEM), and 8 years’ professional engineering experience
Experience in the application of GD&T principles (ASME Y14.5)
Experience with CAD modeling (CREO preferred)
Experience with commercial tolerance analysis tools (Siemens visVSA preferred)
Qualifications We Prefer
Demonstrated working knowledge of statistical tolerancing methods (e.g., Monte Carlo simulations, RSS, MRSS, etc.)
Working knowledge of fabrication processes, producibility enhancements, and inspection and validation methods
Working knowledge of inspection planning, inspection methods and dimensional data analysis
ASME Certified GD&T Professional (GDTP per ASME Y14.5.2) or equivalent5 ASME standard (e.g.Y14.5) committee membership or similar involvement
Expertise in various Inspection and Validation methods and tools, including gages & Coordinate Measuring Machines (CMMs)
What We Offer
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.
Relocation Eligible
Learn More & Apply Now!
Please consider the following role type definition as you apply for this role.
Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA, an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 107,500 USD - 204,500 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
We’re expanding into a full 24/7 operation and are hiring across multiple roles and experience levels. Our 12‑hour overnight shift is ideal for someone who enjoys a more independent work environment with more days off each week. You’ll benefit from premium shift differentials, cross‑training opportunities, and the chance to shape processes on a growing team. If you’re someone who prefers working nights or wants to maximize earning potential while enjoying a schedule with fewer total days giving you additional full days off during the week to spend with family, pursue hobbies, or rest, this could be a great fit for you.
Currently hiring Technicians for the below shifts.
Note: Based on the 2-week rotating shift pattern, employees will be scheduled to work 36 hours one week, and 48 hours on the alternate week. In this alternate week, employees will be receiving 8 hours of overtime, resulting in 16 hours of overtime pay in a month.
Shift A– 6pm to 6am 15% shift differential pay
Week 1: Tuesday, Thursday, and Friday
Week 2: Monday, Wednesday, Saturday and Sunday
Shift B – 6pm to 6am 15% shift differential pay
Week 1: Monday, Wednesday, Saturday and Sunday
Week 2: Tuesday, Thursday, and Friday
Shift D – 6pm to 6am 15% shift differential pay
Week 1: Tuesday, Thursday, and Friday
Week 2: Monday, Wednesday, Saturday and Sunday
How will you make an impact!
In this key Manufacturing Engineer Technician onsite role, you will perform preventative maintenance, calibration, change overs in Z-prep area and perform preventive maintenance for tooling (SMT & BE process) and other specialty support equipment used in the manufacturing process.
Location: This role will be based on-site at one of our St. Petersburg Florida Facilities located in Seminole, FL specializing in Renewable Energy
What will you do?
Key Responsibilities
- Operate, monitor, and adjust SMT equipment while ensuring high quality and process stability.
- Perform setups, changeovers, and material verification for each process step.
- Conduct preventive and corrective maintenance on:
- Laser marking systems
- Glue dispensing machines (CAMALOT)
- Screen printers (DEK)
- SPI systems (KOH YOUNG)
- Pick & place machines (FUJI NXT, AIM)
- Reflow ovens (ITW/VITRONIC)
- Troubleshoot and resolve process issues related to solder paste printing, component placement, inspection, and reflow profiling.
- Create, modify, and optimize SMT programs (FUJI, CAMALOT, DEK, etc.).
- Document downtime, maintenance activities, root cause analysis, and improvements.
- Collaborate with Engineering, Quality, and Production to improve OEE, yields, CP/CPK, and reduce rework.
- Ensure compliance with safety standards, ESD controls, and manufacturing best practices.
- Cover overtime requirements as needed.
How will you get here?
Education and Experience:
- Electronics Industry Experience
- High School Diploma or GED preferred not required or equivalent - experience.
- Six months of demonstrated experience, ideally 2 plus years.
- Must have experience with at least one of the below:
- Laser marking systems
- Glue dispensing machines (CAMALOT)
- Screen printers (DEK)
- SPI systems (KOH YOUNG)
- Pick & place machines (FUJI NXT, AIM)
- Reflow ovens (ITW/VITRONIC)
Why Join Jabil?
- Be part of a mission-critical team supporting Renewable Energy innovation.
- Gain hands-on experience with high-precision, advanced technologies.
- Work in a culture focused on quality, safety, and continuous improvement.
- Competitive compensation and a comprehensive benefits package.
Remote working/work at home options are available for this role.
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
Job Family: General Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.
What will you do?
- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed
- Participating in design reviews to ensure accuracy and compliance with requirements
- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control
- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards
- Work closely with engineers and other designers to meet product specifications and performance requirements
- Modify and revise designs to correct operating deficiencies or to reduce production problems
- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.
- Check and validate designs to ensure they meet required quality and safety standards
- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications
- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications
- Designing and creating schematic PLC input/output connections.
- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.
- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team
- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration
- Capable of creating a Bill of Materials (BOM) for release to manufacturing
- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers
- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs
- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required
Experience:
- 6-8 years of experience in electrical design within the power distribution or data center industry.
- Proven experience as a CAD designer, preferably in an electrical engineering environment.
- Proficiency in CAD software (AutoCAD Electrical, Revit).
- Strong understanding of electrical systems, integration strategy, and system coordination
- Excellent problem-solving skills and attention to detail
- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently
Knowledge, Skills, Abilities:
- Strong knowledge of electrical design, manufacturing processes, and material properties.
- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.
- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.
- Excellent interpersonal and communication skills.
- Creative, self-motivated, accountable, and team-oriented.
- Able to work independently with minimal oversight.
- Effective at presenting information and responding to management, clients, and public queries.
- Capable of influencing others and sharing best practices.
- Comfortable working as part of a global team.
- Capable of assessing projects, articulating risks, and developing project milestones.
- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.
Job Family: General Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.
What will you do?
- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed
- Participating in design reviews to ensure accuracy and compliance with requirements
- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control
- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards
- Work closely with engineers and other designers to meet product specifications and performance requirements
- Modify and revise designs to correct operating deficiencies or to reduce production problems
- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.
- Check and validate designs to ensure they meet required quality and safety standards
- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications
- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications
- Designing and creating schematic PLC input/output connections.
- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.
- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team
- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration
- Capable of creating a Bill of Materials (BOM) for release to manufacturing
- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers
- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs
- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required
Experience:
- 6-8 years of experience in electrical design within the power distribution or data center industry.
- Proven experience as a CAD designer, preferably in an electrical engineering environment.
- Proficiency in CAD software (AutoCAD Electrical, Revit).
- Strong understanding of electrical systems, integration strategy, and system coordination
- Excellent problem-solving skills and attention to detail
- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently
Knowledge, Skills, Abilities:
- Strong knowledge of electrical design, manufacturing processes, and material properties.
- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.
- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.
- Excellent interpersonal and communication skills.
- Creative, self-motivated, accountable, and team-oriented.
- Able to work independently with minimal oversight.
- Effective at presenting information and responding to management, clients, and public queries.
- Capable of influencing others and sharing best practices.
- Comfortable working as part of a global team.
- Capable of assessing projects, articulating risks, and developing project milestones.
- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.
