Engineering Jobs in Germantown, TN

GRAMMER is specialized in developing and manufacturing components and systems for car interiors as well as driver and passenger seats for off-road vehicles, trucks, buses, and trains.

As a global partner to the vehicle manufacturing industry we are represented around the world by our two divisions, Automotive and Commercial Vehicles. Our employees are constantly engaged in developing and producing innovative, flexible solutions to meet challenges in today’s competitive global market. GRAMMER can be found on four continents with more than 50 production, distribution and logistics sites in 20 countries.

Culture:

Here at GRAMMER, we foster a culture that embraces our Grammer CODE: Collaborate in an inclusive environment, Openness in communication and ideas, Drive for results with energy and Empower yourself and others by taking ownership of decisions and actions.

What we are looking for:

Grammer is looking for a Manufacturing Engineer to join our team in Tupelo, MS. The ideal candidate will enjoy working in a team environment. This individual will have an opportunity to make lasting and positive changes in our team!

Primary Responsibilities and Essential Functions:

The Manufacturing Engineer is responsible for their assigned manufacturing processes. Through input from the customer, plant staff, and production employees the Manufacturing Engineer will review process controls, emphasize continuous improvement through Lean Manufacturing methodology and Kaizen activities, participate in the development of cell layouts, set up reduction (SMED), lead time reduction, improve productivity through waste reduction. In addition, the Manufacturing Engineer will be responsible for achieving product target cost, improved efficiency, identifying possible production problems for existing products within their scope of accountability.

The Manufacturing Engineer will be involved with helping to determine project capital needs, launch strategies, project timing, process flows, labor and machine standards as well as proposed plans for changes to the process, equipment, molds, and tooling to ensure reliability and compatibility with existing standards and systems.

What you will be doing:

• Support and maintain project timeline
• Management of Project- Process/Product implementation in Plant
• Analyze and validate project risks
• Define and sustain Quality level, scheduling, deadlines, contribution margin, costs and customer satisfaction in the approval and implementation of project phases and variant creation in the pre-series process.
• Analyze and organize transfer process, SAP system generate and modification
• Establish, monitor and control Product Lifecycle management on plant level.
• Change evaluation and preliminary decision from the affected plant view.
• Define, manage and distribute change activities, process documentation, consumption management, and customer approval.
• Organize and follow Ramp Up, R&R, Equipment Industrialization
• Kick off new equipment and tools (plan budget, investment, purchase, build, relocation and setup of all new equipment.
• Plan and organize internal resources for pre-serial and Ramp Up phase.
• Create and control asset list (purchase orders, invoices, asset numbers, customs data, asset tags, accounting overview.
• Planning of industrialization in stages
• Lead cross-functional team on defined tasks in all phases of project
• Define role and transfer tasks between P1 project team, Engineering, Quality, Logistics, and Production.
• Enlisting teams, implementing strategies, measuring ROI and plan continuous improvements
• Lead internal and external meetings with suppliers, customer, plants and make correlation between different parties.
• Define and manage specific customer requirement with transfer and implementation in serial production between departments responsibility.
• Collect and organize execution of all norms and standards based on requirements of ITAF audit and VDA standards.
• Participate in identifying open items issues
• Review mold and secondary fixture design and make recommendations
• Develop workflow, effective layout and optimize processes
• Evaluate and implement process/product improvements
• Work with the team to develop tooling and poke yoke methods
• Assist with training of both technical and production in processing standards
• Develops short- and long-term strategy to support customer requirement
• Authorizes engineering change notices (deviations), process alerts, purchase orders, equipment spare parts inventory, and personnel training requests
• Supports plant safety rules, UAW contract, procedures and standards
• Involved with assigned project launch strategies, capital needs, program timing in support of all APQP, PPAP, and ISO/TS16949 requirements

Deliverables:

• Achieve goals and objectives relating to cost and timing
• Achieve project expectation and requirements for all elements of PPAP, ISO/TS16949 (Promotes ISO/TS16949 compliance)
• Program status reports (i.e., top five ppm’s, open items, corrective action plans, etc.)
• Maintain records for primary tools (molds) and selected secondary equipment
• Prioritize personnel and resources as activities require
• Accountable for customer/plant continuous improvement programs
• Develop and maintain favorable customer relations

What you will bring along:

• Bachelor's degree in a related field
• A minimum of 3 years' experience in a similar role.
• Project management
• SAP Workflow
• Excellence in MS Office Suite
• AutoCAD
• Automotive industry experience.
• Product launch exposure a plus.
• Injection Molding and robotic experience required (Fanuc)

What we can provide you:

• Medical, Dental, and Vision coverage
• Tuition reimbursement programs
• 401(k) match
• Robust EAP services
• Developmental opportunities
• Much more!

Responsibilities

• Efficient setup and operation of CNC mills, lathes, and other complex multi-axis (5-axis/6-axis) machining centers to produce component parts in accordance with engineering drawings, internal sketches, or other specifications provided by engineering/USN
• Interpret blueprints, engineering drawings, and work instructions while understanding GD&T requirements
• Select tooling, adjust offsets, and verify machine parameters for complex geometries
• Perform quality checks using micrometers, calipers, gauges, CMM, and other precision instruments
• Perform some follow-up operations, such as deburring, polishing, and grinding
• Maintain safe and clean work environment in compliance with company and DoD standards
• Document production, quality, and maintenance logs
• Collaborate with supervisors, engineers, and fellow machinists to resolve production issues
• Communicate with team members to produce quality parts to specification
• Other duties as assigned within required scope of work

Required Qualifications

• Associate’s degree or CNC Machining Technology certification (2-year program)- Preferred
• High School diploma or GED equivalent
• Able to properly wear PPE (Personal Protective Equipment)
• Able to stand for long periods of time, bend, stoop, lift, reach above shoulders, pull, push, climb up/downstairs
• 1+ years’ experience as a Machinist
• Knowledge of machining fundamentals, G-code, M-code and shop mathematics (Ability to perform basic arithmetic, geometric and algebraic calculations)
• Ability to read and interpret technical drawings and GD&T
• Proficiency with precision inspection tools

Company Description

Ranchland Tractor & ATV is a leading Mississippi dealer for Mahindra, Kioti, Polaris, CFMOTO, Can-Am, Sea-Doo, Bad Boy Mowers, Kohler, Briggs, Kawasaki Engines, and Texas Bragg Trailers. Located in Saucier, MS, we serve the Gulf Coast area of Mississippi and have a large in-stock inventory of tractors, trailers, implements, zero turn mowers, commercial lawn mowers, finishing mowers, outdoor power equipment, ATV's, small engines, and much more!

Role Description

This is a full-time on-site role for a Parts Assistant. The Parts Assistant will be help our Parts Team with Receiving shipments, Packaging, Shipping, Inventory Counting, delivering parts to our service department and keeping the work area neat. This position will require direct communication with customers as well as sales support staff. This is an entry level position that offers advancement opportunity.

Ranchland Tractor Offers:

• Stable Employment
• Competitive Pay
• Matching 401K
• Health Insurance
• Paid Time Off
• Advancement Opportunities

Qualifications

• Good communication and customer service skills
• Ability to lift 30 Lbs.
• Customer satisfaction oriented, with a passion for providing quality service
• Ability to work in a fast-paced environment
• Knowledge of tractor and ATV parts is desirable
• High school diploma
• Valid Drivers License
• Must be able to pass a background check
• Ability to be on-time and have a strong work ethic

Equal Opportunity Employer

Martinrea is a diversified global automotive supplier engaged in the design, development and manufacturing of highly engineered, value-added Lightweight Structure and Propulsion Systems. We employ approximately 15,000 skilled and motivated people at manufacturing, engineering and technical centers in Canada, the United States, Mexico, Brazil, Germany, Slovakia, Spain and China. Our business strategy leverages world-class technologies, motivated and talented people, and high-quality products.

Our Mission is to make people's lives better by:

• Delivering outstanding quality products and services to our customers
• Providing meaningful opportunities, job satisfaction, and job security for our people
• Being positive contributors to our communities and
• Providing superior long-term investment returns to our stakeholders

Our strength is our people

We invite you to follow your dreams and explore a challenging and rewarding career at Martinrea.

Job Summary

The EHS Compliance Specialist is a critical, high-visibility role responsible for the leadership, ownership, and continuous improvement of all Environmental, Health, and Safety (EHS) programs. This position ensures complete compliance with OSHA, TOSHA, EPA, and internal quality standards (ISO 14001, IATF 16949 requirements) to maintain a proactive, injury-free work environment. The Specialist serves as the primary EHS subject matter expert and driver of safety culture change within the manufacturing facility.

Major Accountabilities

EHS Leadership & Culture

• Owns and drives the site's EHS strategy, working collaboratively with the Plant Manager and Operations leadership.
• Creates and sustains a proactive, behavioral-based safety culture through employee engagement, recognition programs, and strong visible leadership on the plant floor.
• Leads the development, delivery, and documentation of all required safety and environmental training programs.
• Conducts thorough and root-cause-focused accident and incident investigations, implementing corrective actions to prevent recurrence.
• Maintains authority to shut down production or specific processes immediately due to imminent safety hazards.

Compliance & Management Systems

• Serves as the ISO 14001:2015 Site Representative, ensuring compliance, conducting internal audits, and driving continual improvement within the Environmental Management System.
• Manages and ensures compliance with all applicable federal, state, and local regulatory requirements (OSHA, TOSHA, EPA).
• Maintains and updates all official documentation, including OSHA Logs (300, 300A), training records, and environmental audit reports.
• Assists in the identification, analysis, control, and elimination of occupational and environmental hazards (e.g., LOTO, machine guarding, ergonomics, chemical handling).

Workers' Compensation & HR Collaboration

• Collaborates with the Human Resources Manager to administer the Workers' Compensation program, focusing on early intervention, return-to-work protocols, and minimizing recordable incidents.
• Provides coaching and technical support to managers and supervisors to ensure consistent adherence to safe work practices.

Qualifications

• Education: Bachelor’s degree in occupational safety, Environmental Engineering, or a related technical field is required.
• Experience: Minimum of three (3) years of dedicated safety experience in a high-volume manufacturing or industrial environment.
• Technical Knowledge:
• Expert knowledge of OSHA and TOSHA General Industry Standards is required.
• Demonstrated knowledge of ISO 14001:2015 Environmental Management Systems.
• Familiarity with IATF 16949 quality system requirements.
• Knowledge of any applicable customer-specific requirements.
• Core Competencies:
• Exceptional communication skills with the ability to listen, coach, and present complex information clearly to all levels of the organization.
• High degree of thoroughness and attention to detail; does not assume compliance.
• Proven relationship-building skills across departments (Operations, HR, Quality).
• Computer and spreadsheet proficiency (MS Office Suite).
• Bilingual English/Spanish is strongly preferred.

Work Environment & Benefits

Work Environment:

• Constant communication with employees, peers, and management, requiring high visibility on the plant floor (Office and Plant floor).
• Fast-paced, team-oriented, and dynamic environment with frequent demands.
• Overtime and occasional travel may be required.

Benefits:

• Working in a collaborative, team environment committed to safety excellence.
• Comprehensive Medical, Dental, and Vision Insurance.
• Annual Stipend for Professional Certification (e.g., ASP, CSP) and Continuing Education.
• Safety shoe and prescription safety glasses reimbursement.
• Supplier discounts.
• Tuition reimbursement and additional training opportunities.

Key Responsibilities

• Perform grinding, rough finishing, excavation, and final finishing/polishing of Nickel Aluminum Bronze (NiAlBr) and stainless-steel components to meet specifications
• Utilize hand and power tools to achieve precise finishes and tolerances
• Apply and fit edge gauges and cylindrical gauges to required tolerances
• Work collaboratively with production and quality teams to ensure compliance with engineering drawings and customer requirements
• Stand, bend, and work in physically demanding positions for up to 8 hours per shift
• Safely lift and maneuver materials weighing up to 50 lbs.
• Work at height using manlifts, scaffolding, or platforms as required
• Maintain flexibility to work any assigned shift, including nights and weekends
• Travel to local and out-of-state shipyards (including East Coast locations, Florida, and Virginia) for repair and overhaul work
• Obtain and maintain certifications for cranes, forklifts, skid-steers, manlifts, and scissor lifts
• Adhere to all safety protocols and maintain a clean, organized work environment
• Support additional production tasks as needed to meet operational demands

Qualifications & Requirements

• High school diploma or GED required; technical or vocational training preferred
• Proven experience grinding and finishing Nickel Aluminum Bronze (NiAlBr) and stainless steel
• Experience working with tight tolerances and precision measurement tools
• Proficiency with hand and power tools with a strong emphasis on safety and quality
• Ability to stand, bend, climb, and work in physically demanding positions for extended periods
• Ability to safely lift up to 50 lbs.
• Ability to polish and finish components at height from manlift baskets or scaffolding
• Willingness to work flexible shifts and travel as required
• Must meet Department of Defense (DoD) security clearance requirements
• Valid driver’s license required
• Strong attention to detail and commitment to high-quality workmanship
• Excellent communication skills and ability to work independently or as part of a team

Preferred Qualifications

• Prior experience in a defense, foundry, or shipyard environment
• Ability to read and interpret engineering drawings, blueprints, and specifications
• Knowledge of OSHA safety regulations and best industrial practices

Akkodis is seeking a Quality Assurance Auditor/Engineer for a Contract job with a client in West Point MS Ideally looking for applicants with a solid background in the Manufacturing industry.

Rate Range: $50/hour to $55/hour; The rate may be negotiable based on experience, education, geographic location, and other factors.

Responsibilities

• Primary point of contact for all customer correspondence relative to quality objectives, quality concerns and the development of strong customer relationships.
• Lead and develop teams to ensure effective problem resolution.
• The monitoring and measurement of business-related metrics specific to stated Leadership goals
• Track and report progress to closure and number of open issues (Metrics. i.e. days open, quantity open / closed)
• Responsible for generating and maintaining Quality Plans as required, including maintaining their Configuration Control in accordance with ISO and MIL requirements.
• Responsible for on-going customer interface for all Quality related matters relative to non-conforming product.
• Implementation and maintenance of QMS / ISO system.

Qualifications

• Bachelor’s degree in Engineering or Engineering Technology preferred, though extensive experience may meet the educational requirement.
• At least 8 years of Engineering and Quality Assurance experience.
• In-depth knowledge of core quality tools (MSA, PFMEA, Control Plans, LPAs, SPC) and proficient use of problem-solving tools including GD&T, Metrology / CMM practices, Shainin, DFSS, Ishikawa Diagrams, 3L 5Why, 8D, etc.
• Quality certification preferred

• Maintains advanced knowledge to diagnose and repair mechanical problems on heavy equipment.
• Performs repair or preventative maintenance on electrical, diesel and gasoline vehicles, including compactor, excavator, wheel loader, and other vehicles to maximize safe and productive operations. Typical repairs and maintenance would include work on engines, transmissions, chassis, drivelines and body components, hydraulic, brake, electrical and suspension systems, wheels, tires and undercarriages.
• Reads and interprets equipment condition reports and/or repair orders, communicate with supervisor and/or operator for clarification of defects and discuss preventive techniques with operators to minimize future repairs.
• Completes paperwork associated with repairing equipment, documenting parts usage and accounting for applied times (i.e., work order times compared to time card times).
• Completes daily consumables report to record hours, fuel and oil usage, and provide information for input into Dossier, Republic Services Fleet Management Software system.
• Collects and interprets analyses from oil sampling, on-board computer, and fleet management software.
• Follows all safety policies and procedures.
• Performs overhauls on gas or diesel engines.

• Advanced knowledge in air brakes, tires, hydraulics, advanced electrical, advanced drive train knowledge, suspension, steering and wheel-end components training as evidenced by ASE Certification.
• At least 1 year of experience as a technician working on heavy equipment.
• Minimum of 1 year of prior experience as a technician working on heavy equipment, demonstrating the ability to service increasingly more challenging maintenance repairs.Mechanical Trade School certificate or degree
• Certificate in electrical diagnostics.
• Applicable ASE certifications.
• Working knowledge of Tier 4 emission systems.
• Welding and/or fabrication skills and/or experience.

• Minimum of 1 year of experience in a technician position requiring knowledge and application of OSHA Haz Com; OSHA Lock Out Tag Out and all OSHA Fire Protection regulations.

• Safe: We protect the livelihoods of our colleagues and communities.
• Committed to Serve: We go above and beyond to exceed our customers' expectations.
• Environmentally Responsible: We take action to improve our environment.
• Driven: We deliver results in the right way.
• Human-Centered: We respect the dignity and unique potential of every person.

• Barron's 100 Most Sustainable Companies
• CDP Discloser
• Dow Jones Sustainability Indices
• Ethisphere's World's Most Ethical Companies
• Fortune World's Most Admired Companies
• Great Place to Work
• Sustainability Yearbook S&P Global

• Maintains advanced knowledge to diagnose and repair mechanical problems on heavy equipment.
• Performs repair or preventative maintenance on electrical, diesel and gasoline vehicles, including compactor, excavator, wheel loader, and other vehicles to maximize safe and productive operations. Typical repairs and maintenance would include work on engines, transmissions, chassis, drivelines and body components, hydraulic, brake, electrical and suspension systems, wheels, tires and undercarriages.
• Reads and interprets equipment condition reports and/or repair orders, communicate with supervisor and/or operator for clarification of defects and discuss preventive techniques with operators to minimize future repairs.
• Completes paperwork associated with repairing equipment, documenting parts usage and accounting for applied times (i.e., work order times compared to time card times).
• Completes daily consumables report to record hours, fuel and oil usage, and provide information for input into Dossier, Republic Services Fleet Management Software system.
• Collects and interprets analyses from oil sampling, on-board computer, and fleet management software.
• Follows all safety policies and procedures.
• Performs overhauls on gas or diesel engines.

• Advanced knowledge in air brakes, tires, hydraulics, advanced electrical, advanced drive train knowledge, suspension, steering and wheel-end components training as evidenced by ASE Certification.
• At least 1 year of experience as a technician working on heavy equipment.
• Minimum of 1 year of prior experience as a technician working on heavy equipment, demonstrating the ability to service increasingly more challenging maintenance repairs.Mechanical Trade School certificate or degree
• Certificate in electrical diagnostics.
• Applicable ASE certifications.
• Working knowledge of Tier 4 emission systems.
• Welding and/or fabrication skills and/or experience.

• Minimum of 1 year of experience in a technician position requiring knowledge and application of OSHA Haz Com; OSHA Lock Out Tag Out and all OSHA Fire Protection regulations.

• Safe: We protect the livelihoods of our colleagues and communities.
• Committed to Serve: We go above and beyond to exceed our customers' expectations.
• Environmentally Responsible: We take action to improve our environment.
• Driven: We deliver results in the right way.
• Human-Centered: We respect the dignity and unique potential of every person.

• Barron's 100 Most Sustainable Companies
• CDP Discloser
• Dow Jones Sustainability Indices
• Ethisphere's World's Most Ethical Companies
• Fortune World's Most Admired Companies
• Great Place to Work
• Sustainability Yearbook S&P Global

MMR Project Engineer

Company Culture:

At MMR, our most valuable assets are not our buildings or equipment, it is our family of employees with diverse backgrounds and experiences. Our investment in training programs and resources allows our employees to reach both their personal and professional goals. This is evident with MMR receiving numerous awards including “Best Place to Work” and consistently being recognized as one of the top Engineering News Record’s “Annual Specialty Contractors.”

Organization Description:

MMR has served as the industry leader in instrumentation and electrical construction, maintenance, and technical services for over 30 years. Our diverse list of clients allows us the unique ability to work across industry lines in the oil and gas upstream and midstream as well as chemical and petrochemical downstream, industrial manufacturing, power generation, renewable energy, mission critical, heavy commercial, and energy storage sectors. MMR holds the proud distinction of being the largest privately owned “Open Shop” contractor in the United States with over 30 branch offices including global locations in Canada, Qatar, and South America. For more information, please visit our website: Description:

MMR is seeking Project Engineer candidates with a degree in Construction Management or industry related equivalent. The responsibilities would include, but not limited to, the following:

• Assist with organization, planning, scheduling, and subcontractor scheduling of the project
• Handle day to day issues with meeting deadlines within budget
• Assist with developing job tracking systems including schedule, productivity, and cost
• Maintaining and updating tracking systems, schedules, cost reports
• Identifying and submitting RFI’s
• Participate in weekly client update meetings
• Prepare and submit weekly client update reports
• Preparing and submitting change orders
• Coordinating with site supervision to build work packages
• Prepare and submit client invoices
• Maintaining RFI log, change order log, invoice log, restraint log, drawing log, equipment log, material log
• Updating schedule of values and preparing client invoices
• Field material and equipment purchasing as required
• The above is not an exhaustive list of duties, and you will be expected to perform different tasks as needed to align with the overall business objectives of the organization

Required Skills and Qualifications:

• BS in Construction Management or related field
• At least 3-5 years relevant work experience
• Experience in electrical and instrumentation construction preferred
• Experience in industrial construction is preferred
• Must have knowledge in estimating, scheduling, and purchasing
• Ability to read and understand electrical drawing packages and specifications
• Working knowledge of MS Office software
• Experience with Primavera P6 preferred
• Ability to read and understand a CPM schedule and identify critical paths
• Ability to work independently, prioritize, organize, problem solve, and exercise good judgement with minimal supervision
• Strong organizational and interpersonal skills
• Able to work effectively under time pressure and/or deadline
• Excellent verbal and written communication skills
• Willingness to work flexible, varying hours, including evenings and weekends as needed
• Regular and reliable attendance at work

MMR Group, Inc. and its affiliated companies ("MMR") is an Equal Opportunity Employer and does not discriminate on the basis of race, color, national origin, religion, sex, age, veteran status, genetic information or any other legally protected class.

*RNGD has contracted FireSeeds Recruiting to lead this search and will not accept submissions from other recruiting firms. Qualified candidates should apply directly through LinkedIn.*

RNGD is seeking an experienced Senior Project Manager to lead the execution of large, complex infrastructure projects or multiple mid‑sized projects simultaneously. This role serves as the company’s primary management representative responsible for cost control, schedule execution, team leadership, and client satisfaction.

The Senior Project Manager will work closely with field leadership, preconstruction, and executive leadership to ensure projects are delivered safely, on schedule, within budget, and aligned with RNGD standards and values.

Responsibilities

• Provide active management of one large infrastructure project or multiple mid‑sized projects
• Maintain full responsibility for cost management, forecasting, and gross profit targets
• Plan and allocate staff resources in coordination with Superintendents and field leadership
• Direct and support Superintendents in executing scope of work to RNGD standards
• Oversee project documentation, reporting, and document control
• Coordinate estimate reviews and bid strategy with Preconstruction/Estimating teams
• Support pipeline health and future revenue goals through proactive preconstruction involvement
• Develop, mentor, and evaluate Project Engineers and other assigned team members
• Ensure adherence to project and company KPIs related to safety, quality, schedule, process, and client satisfaction
• Serve as a key point of contact for owners, clients, and internal stakeholders

Qualifications

• Bachelor's Degree in Construction Management, Engineering, or similar field strongly preferred
• 5–10 years of Project Management experience in infrastructure construction or related heavy civil experience: Water, sewer, storm drainage, Utility construction, Mass grading, soil stabilization, or soil importing
• Strong cost and schedule management capability
• Excellent negotiation and communication skills
• Teacher’s mindset with a passion for developing people
• Customer‑oriented and solutions‑focused
• Strong judgment and ability to manage complexity across multiple projects
• Thrives in a fast‑paced, entrepreneurial environment
• Strong working knowledge of the Microsoft Office Suite, other Estimating/Project Management softwares

*RNGD has contracted FireSeeds Recruiting to lead this search and will not accept submissions from other recruiting firms. Qualified candidates should apply directly through LinkedIn.*