Engineering Jobs in Germantown Ohio

Compensation details: 1 Yearly Salary

PIa3124d977fd4-3631

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. 

Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

What You Will Do:

• Follow specific directions of Leader/Supervisor to carry out repair and restoration projects for engine parts.
• Layout work requirements and obtain needed equipment to perform routine repair and alteration operations.
• Perform bench repair operations to restore parts where close tolerances are not normally required and specifically defined criteria are used.
• Recognize need and arrange for repair or replacement of equipment used in performing the work as necessary.
• .Perform routine servicing throughout the assigned area following specified procedures and written instructions such as operator’s check list for upkeep and to assure equipment operates properly.
• Assist others responsible for new process tryout, and other specialized assignments within the scope and skill level of this job description.
• .Refer difficulties to Leader/Supervisor.
• Maintain logs and records as requested to communicate findings and prepare requests for approval.
• May be required to train for, obtain and maintain licenses, operator permits, and certifications within assigned area.
• May be assigned to carry out tasks not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individual’s skills.

2nd shift hours are Monday through Friday from approximately 3 pm to 12 am.

Qualifications You Must Have:

• High School Diploma or GED.

• U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.

• Able to obtain/ maintain active Security Clearance after Day 1 of work.

• 2 years of experience in blueprint reading, CNC manual machining & reading. Knowledge of shop math.

Qualifications We Prefer: In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

  Pratt & Whitney in Middletown, CT is a FAA regulated facility and as such under the U.S. Departments of Transportation’s Federal Aviation Administration (FAA). This position is considered safety sensitive in accordance with FAA Guidelines. Candidate will be subject to drug and alcohol testing per FAA’s regulation 14 CFR part 120, as well as 49 CFR part 40.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. 

Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

We have an immediate need for a Facilities Mechanic Pipefitter 1st Shift (onsite)

What You Will Do:

• Perform repetitive tasks related to preventative maintenance, supply and servicing of facilities, machinery and equipment.
• Assist trade groups as required.
• Under the direction of supervisor or project leader, work from specified methods and procedures, exercise care and use judgment for routine tasks associated with machine and equipment servicing and assist trades groups on projects.
• Assist others in system operation, care, use and preventative maintenance techniques where a limited knowledge of specialized trade terminology is required to understand instructions.
• Work with manufacturing departments and trades groups responsible for developing preventative maintenance servicing schedules for machine tools and equipment.
• Preform similar duties throughout the facility within the scope and skill level of this job description. Assist other trades working on joint projects where common skill crossover provides the opportunity for shared responsibilities and more effective use of skills.
• Refer difficulties to leader/supervisor.
• May be required to train for, obtain and maintain licenses, operator permits and certifications for assigned area.

Qualifications You Must Have:

• High School/ GED
• Requires knowledge of arithmetic involving decimals and fractions to work from drawings and sketches make required computations and to work with variable measuring instruments. 
• 6-12 months experience.

Qualifications We Prefer:

• Should be able to read and comprehend service manuals, instruction booklets and use mechanics’ hand and power tools.

• In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

Learn More & Apply Now!

In addition to transforming the future of flight, we are also transforming how and where we work. We’ve introduced role types to help you understand how you will operate in our blended work environment.

This role is onsite. Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines.

Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee’s personal responsibility.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. 

Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

We have an immediate need for a Production Machinist/Processor C 2nd shift (Onsite)

What You Will Do:

Job Description

• Setup and operate one machine tool or process equipment type and operate more than one unrelated machine tool or process equipment types within an assigned area to produce precision turbine engine parts.

• Perform work where methods, procedures and processes are well developed and the required tooling, gaging and fixturing are provided.

• Under the direction of leader/supervisor, work from verbal and written instructions, operation sheets, drawings and other pertinent information. Following established methods and procedures, use manual or numerically controlled machine tools such as milling, boring, grinding, turning, broaching and shaping machines to achieve the required dimensional specifications.

• Recognize indications of dull or damaged cutting tools and replace them as needed.

• Perform bench, assembly and surface finishing operations such as deburring, blending, trimming and fitting, using a variety of hand and power tools.

• Follow prescribed methods and procedures to perform drilling, riveting and bonding operations to assemble various details in producing a finished part. Operate part-marking equipment.

• Use a variety of media, dry or liquid, to perform cleaning or part preparation and finishing operations. Operate tumbling, grit blast, shot peen, buffing and polishing equipment, wash machines and dip tanks for part surface conditioning.

• Apply masking as required. Perform applications of anti-gall and polymite coatings utilizing dry bake ovens to cure.

• Utilize a variety of fixed or variable measuring instruments to check dimensions and part features. Operate OpCert and other computer–based systems to retrieve and store information and records.

Refer difficulties to leader or supervisor.

Perform routine servicing throughout assigned area following specified procedures and written instructions, such as operators’

checklist, for upkeep and to assure equipment operates properly.

May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individuals skills.

Qualifications You Must Have:

• High School Diploma or GED.

Qualifications we prefer:

• 1-3 years of machining experience.

• In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

Learn More & Apply Now!

Must be a U.S. Citizen. This position may require access to systems/tools that are restricted to individuals who possess US citizenship.

In addition to transforming the future of flight, we are also transforming how and where we work. We’ve introduced role types to help you understand how you will operate in our blended work environment. This role is:

Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines.

Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee’s personal responsibility.

EV5 Job code: PWH77771 (Production Machinist/Proc C)

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

What You Will Do:

Our Pratt & Whitney Middletown, CT facility has several exciting opportunities for a Production Machinist available on 1st shift .

1st shift hours are Monday through Friday from approximately 6:30 am to 3:30 pm.

In this role, you will setup and operate one machine tool or process equipment type and operate more than one unrelated machine tool or process equipment types within an assigned area to produce precision turbine engine parts. You will perform work where methods, procedures and processes are well developed and the required tooling, gaging and fixturing are provided.

• Under the direction of leader/supervisor, work from verbal and written instructions, operation sheets, drawings and other pertinent information. Following established methods and procedures, use manual or numerically controlled machine tools such as milling, boring, grinding, turning, broaching and shaping machines to achieve the required dimensional specifications. Recognize indications of dull or damaged cutting tools and replace as needed.

• Perform bench, assembly and surface finishing operations such as deburring, blending, trimming and fitting, using a variety of hand and power tools. Follow prescribed methods and procedures to perform drilling, riveting and bonding operations to assemble various details in producing a finished part. Operate part-marking equipment.

• Use a variety of media, dry or liquid, to perform cleaning or part preparation and finishing operations. Operate tumbling, grit blast, shot peen, buffing and polishing equipment, wash machines and dip tanks for part surface conditioning. Apply masking as required. Perform applications of anti-gall and polymite coatings utilizing dry bake ovens to cure.

• Utilize a variety of fixed or variable measuring instruments to check dimensions and part features. Operate OpCert and other computer–based systems to retrieve and store information and records.

• Perform routine servicing throughout assigned area following specified procedures and written instructions, such as operators’ checklist, for upkeep and to assure equipment operates properly.

• May be required to train for, obtain and maintain licenses, operator permits and certifications within assigned area.

Qualifications You Must Have:

• High School Diploma or GED equivalent with 6 months of machining experience

In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious.

Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

This position is for 2nd shift. Hours are Monday - Friday 3:12pm - 11:59pm.

What You Will Do :

• Under direction of leader/supervisor, follow assembly drawings and/or specifications and computer information systems to prepare parts and build subassemblies, modules and accessories for new gas turbine engines where tooling and process methods are established. Perform similar duties assisting with engine test operations and performing component and accessory tests as assigned.

• Use overhaul and repair procedures and specifications to perform the mechanical work to overhaul engines, modules and related components.

• Obtain parts, check details for conformance to assembly requirements and fit and measure components to assure overall dimensions are within limits specified.

• Use mechanic’s hand tools, holding fixtures, and specialized assembly equipment to build engine sections and perform installation of details and maintain equipment and tooling for assigned areas.

• Provide related support for test operations and assist with testing under direct supervision and specific test schedules.

• Perform similar duties to assist with co-producer, customer support or other similar programs, retrofit projects and to accommodate new engine programs and assist with changes in specifications.

Qualifications You Must Have :

• High School Diploma or Equivalent & formal training in a specialized field achieving A&P license or equivalent OR 4 years of technical high school including technical post high school certification and 5+ years of heavy automotive experience.

Qualifications We Prefer:

• Experience as an aerospace mechanic or A&P mechanic preferred.

• 3 + years avionics mechanic experience.

In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

Learn More & Apply Now!

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

What You Will Do:

Our Pratt & Whitney Middletown, CT facility has several exciting opportunities for a Production Machinist available on 3rd shift .

3rd shift hours are Monday through Friday from approximately 11:00 pm to 7:00 am.

In this role, you will setup and operate one machine tool or process equipment type and operate more than one unrelated machine tool or process equipment types within an assigned area to produce precision turbine engine parts. You will perform work where methods, procedures and processes are well developed and the required tooling, gaging and fixturing are provided.

• Under the direction of leader/supervisor, work from verbal and written instructions, operation sheets, drawings and other pertinent information. Following established methods and procedures, use manual or numerically controlled machine tools such as milling, boring, grinding, turning, broaching and shaping machines to achieve the required dimensional specifications. Recognize indications of dull or damaged cutting tools and replace as needed.

• Perform bench, assembly and surface finishing operations such as deburring, blending, trimming and fitting, using a variety of hand and power tools. Follow prescribed methods and procedures to perform drilling, riveting and bonding operations to assemble various details in producing a finished part. Operate part-marking equipment.

• Use a variety of media, dry or liquid, to perform cleaning or part preparation and finishing operations. Operate tumbling, grit blast, shot peen, buffing and polishing equipment, wash machines and dip tanks for part surface conditioning. Apply masking as required. Perform applications of anti-gall and polymite coatings utilizing dry bake ovens to cure.

• Utilize a variety of fixed or variable measuring instruments to check dimensions and part features. Operate OpCert and other computer–based systems to retrieve and store information and records.

• Perform routine servicing throughout assigned area following specified procedures and written instructions, such as operators’ checklist, for upkeep and to assure equipment operates properly.

• May be required to train for, obtain and maintain licenses, operator permits and certifications within assigned area.

Qualifications You Must Have:

• High School Diploma or GED equivalent with 6 months of machining experience

In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Position Summary:

The purpose of the Quality Manager is to lead and manage our Quality Management System (QMS) and ensure that products, processes, and services consistently meet internal standards and customer expectations.

This role is responsible for ISO 9001 compliance, customer complaint resolution, CAPA management, internal and external audits, process improvement initiatives, and fostering a strong quality culture across operations. The Quality Manager partners cross-functionally with Operations, Engineering, Supply Chain, Service, and Sales to drive continuous improvement and operational excellence.

Key Responsibilities

• Provide leadership and guidance for Quality Assurance activities supporting Operations, Sales, Service, Distributors, and Customers.
• Support the development and maintenance of the Quality Policy and Quality Management System (QMS), ensuring quality objectives are established, tracked, and achieved.
• Develop and execute an internal audit program; conduct audits and support customer and regulatory inspections.
• Ensure timely response to customer complaints and support resolution within established service standards.
• Support Quality System deployment, including implementation, documentation control, regulatory compliance, and product release sign-offs.
• Plan and implement quality policies, procedures, and continuous improvement initiatives to ensure products and services meet internal and customer standards.
• Conduct Management Review meetings to ensure ongoing performance and effectiveness of the Quality Management System.
• Design and implement quality control methods, process improvement initiatives, inspection standards, and testing procedures using Lean and/or Six Sigma methodologies.
• Define and clarify roles and responsibilities related to quality throughout the organization.
• Utilize statistical and analytical tools to identify process improvement opportunities.
• Lead and track quality improvement projects focused on cost reduction, defect reduction, and process standardization.
• Manage Corrective and Preventive Action (CAPA) processes.
• Analyze trends and lead investigations related to product complaints and internal nonconformances.
• Support customer and distributor quality-related communications and issue resolution.
• Ensure ISO 9001 certification compliance for facilities and related activities.
• Lead by example in root cause analysis and proactive problem-solving.
• Support cross-functional continuous improvement initiatives in collaboration with Operations, Engineering, Supply Chain, Finance, and other departments.
• Drive measurable improvements using Lean manufacturing principles.
• Provide training and guidance to employees on quality standards, procedures, and expectations.
• Ensure products and components—from raw materials to finished goods—meet internal and customer quality standards.
• Prepare and maintain quality documentation, including policies, procedures, manuals, work instructions, and training materials.
• Oversee the ISO 9001 program, including compliance, documentation, and audit coordination.
• Respond to facility requests related to quality standards, documentation, and regulatory clarification.
• Conduct compliance audits to assess adherence to quality standards and company policies; provide recommendations for corrective actions.
• Stay current on industry standards, regulatory updates, and quality best practices.
• Perform other duties as assigned.

Qualifications and Skills:

• Minimum of five (5) years of progressive experience in Quality Management within a manufacturing environment.
• Bachelor’s degree in Quality, Engineering, or related technical field required; Master's degree preferred. Equivalent combination of education and experience may be considered.
• ISO 9001 experience required (implementation, maintenance, and audit support).
• Experience with CAPA and structured root cause analysis methodologies.
• Lean Manufacturing and/or Six Sigma certification (Green Belt or Black Belt) preferred.
• Strong understanding of manufacturing processes and quality control methods.
• Proven ability to resolve Sales/Service and Customer quality issues.
• Proficient in ISO Quality System Standards.
• Excellent analytical, decision-making, and problem-solving skills.
• Strong interpersonal, communication, and organizational skills.
• Proficient in Microsoft Office (Word, Excel, PowerPoint) and able to navigate ERP systems and document management software.