Engineering Jobs in Everett, WA

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

The Boeing Regulatory Administration & Airworthiness team is seeking Experienced (Level 3) or Senior (Level 4) Airworthiness & Regulatory Engineer to join their team on-site in Everett, Washington .

This team has opportunities for those looking toward next steps in their career development in the field of aviation regulations and safety. If you are a growth-minded person with excitement for certification systems, realizing efficiencies, and thrives in an environment of latitude, we encourage you to apply.

The team and leadership encourage innovation and forward-thinking solutions in an autonomous atmosphere. The team enjoys problem solving through investigating issues, developing action plans, data analysis and driving systems level solutions. This is a dynamic and highly visible environment.

Primary responsibilities:

• Provides technical guidance and training relative to complex safety and airworthiness matters
• Coordinate with engineering teams, project administrators, and regulators (may include international regulators/validation authorities) to successfully certify projects for commercial aircraft production teams
• Review certification plans, write letters to regulators, and understand compliance process
• Leading cross-functional teams resulting in resolution of technical issues.
• Coordinate technical messaging and partnering with the FAA on regulatory issues
• Own, manage, and have/develop technical aptitude to enable execution of process/procedure documents (BPM, BPIs, D6s, D950s, etc.)
• Ensure proper coordination across products, platforms and functional areas to promote culture of compliance to requirements and application of procedures and FAA guidance
• Develop strategic action plans for changes to certification processes and execute those plans through completion
• Contribute to root cause corrective action plans for development and execution of noncompliance’s, voluntary disclosures, informal corrective actions, formal corrective actions, etc. including reviewing/researching processes, design practices, analysis, conducting root cause analysis, and identifying/owning corrective actions and corrective action plans

Basic Qualifications (Required Skills and Experience):

• Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
• Level 3: 5+ years of related work experience or an equivalent combination of education and experience.
• Level 4: 9+ years of related work experience or an equivalent combination of education and experience.
• 5+ years of experience working directly with the FAA and/or ODA on Type Certification projects
• 5+ years of experience in developing, contributing and/or maintaining processes, policies, and procedures.
• Experience with project management and self-managing projects.
• Desire to work in a collaborative environment and ability to interact well with various levels of leadership and front-line employees
• Ability to accomplish goals on a self-directed basis
• Experience leading cross-functional teams 

Preferred Qualifications (Desired Skills and Experience):

• Experience in presenting data to customers, suppliers, and program and site leaders.
• Knowledge of software development and Digital Services product portfolio is preferred.
• Previous experience with Safety Management Systems and/or understanding of FAA Part 5 regulations relating to SMS (or the equivalent global ICAO standards).
• Understanding of Safety Risk Management/Bowtie methodology.
• Experience working across the certification value stream
• Experience communicating verbally and in writing, to a variety of audiences including FAA representation, ODA Leadership, Engineering Unit Members (E-UM) & Project Administrators (PA), and Program & Functional Leaders
• Experience coaching/teaching E-UMs, Design Approval Engineers, Technical Specialists, Cert Plan Owners/Authors on certification processes and tool usage
• Experience identifying web application impact due to changes in certification requirements
• Systems thinker capable of making engineering proposals based on data analysis and forecasting wide reaching and longer-term impacts
• Experience developing presentations and presenting to multiple levels of an organization
• Experience investigating and finding solutions to complex technical or regulatory issues
• Experience recognizing and balance conflicting priorities

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range :

• Experienced (Level 3): $114,750 - $155,250
• Senior (Level 4) $141,100 - $190,900

Applications for this position will be accepted until Mar. 21, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

The Boeing Regulatory Administration & Airworthiness team is seeking Experienced (Level 3) or Senior (Level 4) Airworthiness & Regulatory Engineer to join their team on-site in Everett, Washington .

This team has opportunities for those looking toward next steps in their career development in the field of aviation regulations and safety. If you are a growth-minded person with excitement for certification systems, realizing efficiencies, and thrives in an environment of latitude, we encourage you to apply.

The team and leadership encourage innovation and forward-thinking solutions in an autonomous atmosphere. The team enjoys problem solving through investigating issues, developing action plans, data analysis and driving systems level solutions. This is a dynamic and highly visible environment.

Primary responsibilities:

• Provides technical guidance and training relative to complex safety and airworthiness matters
• Coordinate with engineering teams, project administrators, and regulators (may include international regulators/validation authorities) to successfully certify projects for commercial aircraft production teams
• Review certification plans, write letters to regulators, and understand compliance process
• Leading cross-functional teams resulting in resolution of technical issues.
• Coordinate technical messaging and partnering with the FAA on regulatory issues
• Own, manage, and have/develop technical aptitude to enable execution of process/procedure documents (BPM, BPIs, D6s, D950s, etc.)
• Ensure proper coordination across products, platforms and functional areas to promote culture of compliance to requirements and application of procedures and FAA guidance
• Develop strategic action plans for changes to certification processes and execute those plans through completion
• Contribute to root cause corrective action plans for development and execution of noncompliance’s, voluntary disclosures, informal corrective actions, formal corrective actions, etc. including reviewing/researching processes, design practices, analysis, conducting root cause analysis, and identifying/owning corrective actions and corrective action plans

Basic Qualifications (Required Skills and Experience):

• Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
• Level 3: 5+ years of related work experience or an equivalent combination of education and experience.
• Level 4: 9+ years of related work experience or an equivalent combination of education and experience.
• 5+ years of experience working directly with the FAA and/or ODA on Type Certification projects
• 5+ years of experience in developing, contributing and/or maintaining processes, policies, and procedures.
• Experience with project management and self-managing projects.
• Desire to work in a collaborative environment and ability to interact well with various levels of leadership and front-line employees
• Ability to accomplish goals on a self-directed basis
• Experience leading cross-functional teams 

Preferred Qualifications (Desired Skills and Experience):

• Experience in presenting data to customers, suppliers, and program and site leaders.
• Knowledge of software development and Digital Services product portfolio is preferred.
• Previous experience with Safety Management Systems and/or understanding of FAA Part 5 regulations relating to SMS (or the equivalent global ICAO standards).
• Understanding of Safety Risk Management/Bowtie methodology.
• Experience working across the certification value stream
• Experience communicating verbally and in writing, to a variety of audiences including FAA representation, ODA Leadership, Engineering Unit Members (E-UM) & Project Administrators (PA), and Program & Functional Leaders
• Experience coaching/teaching E-UMs, Design Approval Engineers, Technical Specialists, Cert Plan Owners/Authors on certification processes and tool usage
• Experience identifying web application impact due to changes in certification requirements
• Systems thinker capable of making engineering proposals based on data analysis and forecasting wide reaching and longer-term impacts
• Experience developing presentations and presenting to multiple levels of an organization
• Experience investigating and finding solutions to complex technical or regulatory issues
• Experience recognizing and balance conflicting priorities

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range :

• Experienced (Level 3): $114,750 - $155,250
• Senior (Level 4) $141,100 - $190,900

Applications for this position will be accepted until Mar. 21, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Tooling and Machined Parts to join our Quality team in Puget Sound in Washington.

As an Inspector for Tooling and Machined Parts, you will be essential in ensuring the highest standards of quality and safety in our manufacturing processes. Your keen attention to detail will enable you to conduct thorough inspections of tooling and machined parts, verifying compliance with stringent specifications and quality standards. To excel in this role, it is important to note that employees must pass visual acuity and color perception eye examination tests to ensure accuracy in evaluations. You will collaborate closely with engineering and quality assurance teams to identify and resolve any discrepancies, ensuring that all components meet operational requirements. Your expertise will also be critical in performing audits and surveillance of manufacturing processes, contributing to continuous improvement initiatives.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Obtain daily work assignments from the team leader or supervisor and review work orders and blueprints to determine required tasks.

• Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells.

• Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required.

• Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives.

• Initiate and document any nonconforming materials or assemblies according to specifications and procedures.

• Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance.

• Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements.

• Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies.

• Inspect mockups of engineering design changes to ensure adherence to specifications.

• Perform line checks to investigate whether rejectable conditions exist on other assemblies or airplanes.

• Indicate Quality Assurance acceptance by stamping the appropriate paperwork and processing completed records.

• Review previously accepted systems, customer requirements, or FAA conformities to determine if re-inspection is required.

• Work with engineering and the FAA on red label equipment to ensure proper segregation from production parts.

• Document discrepancies and report them to the appropriate personnel for resolution.

• Assist in the training and instruction of lower-grade inspectors, providing guidance as needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work on-site at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications :

• 3+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).

• 3+ years of experience in setting and using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators.

• 1+ years of experience calibrating and/or using coordinate measurement machines, laser trackers, and/or optical measurement devices.

• Experience as a Quality Inspector.

• Experience working with Microsoft Office (Excel, Word, PowerPoint).

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Ability to complete Fall Protection Training.

Preferred Qualifications:

• Experience inspecting welds / welds certification

• Equivalent education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.)

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $31.32/hour, with potential to earn up to $59.47/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 27, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Tooling and Machined Parts to join our Quality team in Puget Sound in Washington.

As an Inspector for Tooling and Machined Parts, you will be essential in ensuring the highest standards of quality and safety in our manufacturing processes. Your keen attention to detail will enable you to conduct thorough inspections of tooling and machined parts, verifying compliance with stringent specifications and quality standards. To excel in this role, it is important to note that employees must pass visual acuity and color perception eye examination tests to ensure accuracy in evaluations. You will collaborate closely with engineering and quality assurance teams to identify and resolve any discrepancies, ensuring that all components meet operational requirements. Your expertise will also be critical in performing audits and surveillance of manufacturing processes, contributing to continuous improvement initiatives.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Obtain daily work assignments from the team leader or supervisor and review work orders and blueprints to determine required tasks.

• Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells.

• Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required.

• Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives.

• Initiate and document any nonconforming materials or assemblies according to specifications and procedures.

• Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance.

• Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements.

• Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies.

• Inspect mockups of engineering design changes to ensure adherence to specifications.

• Perform line checks to investigate whether rejectable conditions exist on other assemblies or airplanes.

• Indicate Quality Assurance acceptance by stamping the appropriate paperwork and processing completed records.

• Review previously accepted systems, customer requirements, or FAA conformities to determine if re-inspection is required.

• Work with engineering and the FAA on red label equipment to ensure proper segregation from production parts.

• Document discrepancies and report them to the appropriate personnel for resolution.

• Assist in the training and instruction of lower-grade inspectors, providing guidance as needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work on-site at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications :

• 3+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).

• 3+ years of experience in setting and using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators.

• 1+ years of experience calibrating and/or using coordinate measurement machines, laser trackers, and/or optical measurement devices.

• Experience as a Quality Inspector.

• Experience working with Microsoft Office (Excel, Word, PowerPoint).

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Ability to complete Fall Protection Training.

Preferred Qualifications:

• Experience inspecting welds / welds certification

• Equivalent education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.)

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $31.32/hour, with potential to earn up to $59.47/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 27, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

In partnership with our Director of Engineering, Staff, and Clients, the Building Engineer II will work to meet

the evolving maintenance demands of the Portfolio to ensure a superior level of professionalism regarding

all maintenance requirements, including prompt response to and resolution of client and property

occupant requests or concerns.

KEY RESPONSIBILITIES &DUTIES

• Proactively support the development and successful implementation of the preventative

maintenance program for the portfolio

• Perform scheduled maintenance and repairs in accordance with license(s) held
• Perform scheduled inspections, complete, and submit forms and/or checklists accurately and on

time

• Note items on inspection checklist which require follow up or additional work; communicate

findings with Chief and/or client

• Provide recommendations to Chief Engineer and/or client regarding needed repairs or services
• Act as lead of other Engineers as requested
• Read and understand operations manuals, constructions drawings, diagrams, and work orders

necessary to perform maintenance and other work

• Maintain appearance of property to Facilities Partners and Client’s standards
• Collaborate with other contracted vendors, and ensure quality of work performed by them
• Review, monitor and/or provide scope and specifications for contracted property services
• Partner with Chief and/or client to develop specifications for contracted services
• Respond to and resolve tenant service requests in accordance with license(s) held (e.g., replace

ballasts, repair plumbing, etc.)

• Provide excellent customer service by interacting in a professional and positive manner with

clients, vendors, co-workers, etc.

• Support annual operating and capital budgeting process as requested
• Use a variety of hand and power tools following all safety practices
• Maintain a safe, clean, and organized work environment at all times
• Attend monthly safety trainings and follow all safety procedures
• Report all accidents immediately
• Be aware of and report all potential safety hazards immediately
• Other job duties as requested

WORK ENVIRONMENT

While performing the duties of this job, the employee is frequently exposed to fumes, loud noise,

airborne particles and both hot and cold temperatures.

PHYSICAL REQUIREMENTS

While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day. The employee must frequently lift and/or move items up to 10 pounds and sometimes more than 10 pounds and rarely over 50 pounds. The employee must frequently climb a ladder. Specific vision abilities are required to do this job including close vision, distance vision, peripheral vision, depth vision and the ability to adjust focus. The employee must frequently drive an automobile.

EDUCATION & EXPERIENCE

Education/Certification: High School diploma or equivalent; valid driver’s license, automobile liability insurance and the ability to be covered by our insurer; maintain an O7 card, where applicable

Required Knowledge: Demonstrated working knowledge of typical office building systems (e.g., mechanical, fire and life safety, electrical, HVAC, security systems, plumbing, etc.)

Experience Required: 5-7 years’ experience in commercial building maintenance or related field; 5+ years’ experience operating relevant computer hardware/software (e.g., HVAC, security, MS Office, Work order system, smart phones, etc.)

ADDITIONAL REQUIREMENTS

• Ability to obtain an employee fidelity bond
• Possess excellent communication and organizational skills.
• Able to build relationships with clients, vendors, and internal partners
• Ability to provide excellent customer service and mediate difficult client situations
• Ability to speak, write and understand English
• Professional communication etiquette with good oral and written communication skills
• Demonstrated ability to function as part of a team
• Ability to anticipate problems and solve proactively
• Demonstrated ability to prioritize, multi-task, identify, and utilize resources needed to execute

tasks within a deadline-driven environment

• Demonstrated critical thinking, initiative, and trouble shooting skills
• Demonstrated ability to use relevant technology including email, work order system, and smart

phone

• Willingness and demonstration of professional development and continual learning
• Demonstrated ability to complete tasks thoroughly and on time
• Available to work overtime and be on call as needed
• Professional, clean, and neat appearance
• Ability to provide small hand tools as needed
• Must have dependable vehicle capable of transporting needed tools/equipment (e.g., ladder,

power washer, hand tools, power tools, etc.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer, you will play a vital role in our commitment to excellence in aviation by ensuring the safety and quality of our aircraft. Your expertise will be essential as you meticulously verify parts and fasteners against stringent specifications, set up assembly tools, and align components based on engineering drawings and installation plans. In this dynamic environment, you will engage in the installation and rework of various interior parts and assemblies, enhancing both functionality and aesthetics. Your dedication to quality will shine through as you conduct thorough inspections of your work, ensuring compliance with our high standards and promptly addressing any discrepancies.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation

Position Responsibilities

• Review job assignments using bar charts, SOI, IP, and consult with leads to obtain necessary drawings.

• Locate work areas using drawings and electronic resources that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials for accuracy and suitability.

• Determine and obtain the correct fasteners from PCA/MMO control per specifications.

• Set up assembly tools according to tooling instructions, ensuring locators are correct for the model.

• Align and secure parts on the airplane using tooling holes and clamps, checking for proper margins.

• Install and rework interior parts and assemblies, including carpets, stowbins, and seats.

• Select and use appropriate drill bits, reamers, and countersinking tools for pilot and full-size holes.

• Drill, ream, and countersink holes in parts/assemblies per specifications and instructions.

• Disassemble parts, deburr holes, and prepare surfaces for fastener installation.

• Apply sealants, primers, adhesives, and corrosion-inhibiting compounds as required by specifications.

• Install fasteners in the correct sequence using appropriate tools, adhering to specifications.

• Mark and symbolize work for subsequent riveting and install cables and wire bundles as needed.

• Inspect completed work for defects, ensuring compliance with engineering drawings and report any job handicaps.

• Move kits, carts, and equipment within the work cell to facilitate workflow and maintain personal and tool certifications.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications

• 1+ years of experience in manufacturing, automotive, construction, aerospace or similar industry; this can include education and Military.

• 1+ years of experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using hand and power tools

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel.

• Ability to wear hearing protection (ear inserts, canal caps, earmuffs); eye protection.

• Ability to use hazardous chemicals.

Preferred Qualifications:

• 1+ years of experience installing aerospace components, construction or automotive assemblies with precision measurement tools, hand and power tools.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Pay : $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 15, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer, you will play a vital role in our commitment to excellence in aviation by ensuring the safety and quality of our aircraft. Your expertise will be essential as you meticulously verify parts and fasteners against stringent specifications, set up assembly tools, and align components based on engineering drawings and installation plans. In this dynamic environment, you will engage in the installation and rework of various interior parts and assemblies, enhancing both functionality and aesthetics. Your dedication to quality will shine through as you conduct thorough inspections of your work, ensuring compliance with our high standards and promptly addressing any discrepancies.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation

Position Responsibilities

• Review job assignments using bar charts, SOI, IP, and consult with leads to obtain necessary drawings.

• Locate work areas using drawings and electronic resources that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials for accuracy and suitability.

• Determine and obtain the correct fasteners from PCA/MMO control per specifications.

• Set up assembly tools according to tooling instructions, ensuring locators are correct for the model.

• Align and secure parts on the airplane using tooling holes and clamps, checking for proper margins.

• Install and rework interior parts and assemblies, including carpets, stowbins, and seats.

• Select and use appropriate drill bits, reamers, and countersinking tools for pilot and full-size holes.

• Drill, ream, and countersink holes in parts/assemblies per specifications and instructions.

• Disassemble parts, deburr holes, and prepare surfaces for fastener installation.

• Apply sealants, primers, adhesives, and corrosion-inhibiting compounds as required by specifications.

• Install fasteners in the correct sequence using appropriate tools, adhering to specifications.

• Mark and symbolize work for subsequent riveting and install cables and wire bundles as needed.

• Inspect completed work for defects, ensuring compliance with engineering drawings and report any job handicaps.

• Move kits, carts, and equipment within the work cell to facilitate workflow and maintain personal and tool certifications.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications

• 1+ years of experience in manufacturing, automotive, construction, aerospace or similar industry; this can include education and Military.

• 1+ years of experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using hand and power tools

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel.

• Ability to wear hearing protection (ear inserts, canal caps, earmuffs); eye protection.

• Ability to use hazardous chemicals.

Preferred Qualifications:

• 1+ years of experience installing aerospace components, construction or automotive assemblies with precision measurement tools, hand and power tools.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Pay : $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 15, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.