Engineering Jobs in Cypress Tx Flexible
211 positions found — Page 2
The Manufacturing Engineering Supervisor is responsible for providing leadership to the Manufacturing Engineering team to advance manufacturing by reducing cost, improving quality, expanding safety, and increasing on-time delivery. This position functions as a working supervisor and is expected to both lead the team and directly perform hands-on manufacturing engineering activities as the business needs require.
PRINCIPAL DUTIES AND RESPONSIBILITIES (ESSENTIAL FUNCTIONS)
- Leading project teams to acquire, integrate and implement technologies into manufacturing and production processes.
- Ensure appropriate procedures and support documentation are maintained properly and efficiently. Includes: Manufacturing processes, NC programming, tooling, and tool design documentation.
- Manages capital equipment requisitions, ensuring competitive cost, process fulfillment, and quality needs are satisfied.
- Supports new product development to ensure manufacturability, cost, and quality from design concept to production release.
- Manages shop floor tooling and facility operating expenses.
- Assist and support plant and facility maintenance and improvements.
- Serve as a player-coach by executing hands-on manufacturing engineering tasks in addition to supervisory responsibilities.
- Manage the design/build of tooling and fixtures to support production and launch new parts in production.
EDUCATION AND EXPERIENCE
- Bachelor's degree (or equivalent) in Manufacturing Engineering, Mechanical Engineering, or Industrial Engineering preferred.
- 10 years' experience in an Engineering/Operations environment with 3-5 years in a Managerial position.
KNOWLEDGE, SKILLS AND ABILITIES
- Strong organizational and interpersonal skills are a necessity.
- Ability to provide and give work direction within the department and communicate with all aspects/areas of the company.
- Attention to detail, with a high degree of accuracy.
- General Office computer skills. Ability to understand and navigate in Excel - ability to analyze large amounts of data and combine data from multiple sources.
- Requires effective communication skills in working with all departments.
PHYSICAL DEMANDS
- Physical demands are typical of an office position including extended periods of sitting, extensive use of a personal computer and telephone.
- Position requires movement around the facilities.
- Occasional handling of material and components.
WORKING CONDITIONS
Normal manufacturing and office environment. When working occasionally in some shop areas, personal protection equipment (PPE) will be recommended and/or required (safety shoes, safety glasses w/side shields, hearing protection, face shield, gloves, apron and boots). Must have the ability to support extended business hours to meet customer business needs.
DISCLAIMER
The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified.
QUALITY
Quality encompasses all aspects of DeZURIK, Inc.'s business, and every team member shares the responsibility to prevent the occurrence of any nonconformity relating to product, process, and the quality system. All team members have an obligation to identify and record any such nonconformity, and, through designated channels, initiate and recommend solutions.
SALARY AND BENEFITS
DeZURIK offers a competitive base salary in the $86,158 to $107,698 range, based on experience and qualifications, along with annual bonus opportunities tied to performance.
Beyond pay, our market-leading benefits are designed to support your wellbeing. These include medical, dental, vision, and life insurance, as well as short- and long-term disability coverage. DeZURIK also provides a health savings account with company match, a retirement plan for employer contributions through Vanguard, and access to the Granite Assistance Fund for support when it's needed most. We value time for rest and personal growth, offering generous paid time off, including volunteer time off and paid holidays.
Please note: Sponsorship is not available for this role.
#LI-JW1
Professional Engineer (PE) - Power Utility Design
Seeking a licensed PE in Texas
Location: Remote
Are you an experienced Professional Engineer? If you are open to joining a supportive, passionate team, we have an attractive opportunity for you!
Sigma Technologies is a growing engineering and design firm with over 500 team members across 30+ states. For more than 25 years, our work for the power and telecommunications industries has helped accelerate and fortify positive impact in communities across the country. Our core values — Safety, Honesty, Truth, and Decency — fuel our culture. We are TeamSigma™.
**To learn more about working at Sigma, view our video and career page .
**If you do not have the experience required for this role, please refer to our other open positions: **While we list our openings in multiple locations, you only need to apply to one as they are remote.
Please note : New hires will be required to come to our headquarters in Perrysburg, OH for an initial 2-week in-person paid orientation and training period. This position requires travel to job sites as needed, of which in Texas. Travel may require overnight stay. Use of personal vehicle is required, but mileage reimbursement is provided.
WHAT YOU CAN EXPECT TO DO AS A PROFESSIONAL ENGINEER AT SIGMA:
Performs multiple engineering-related tasks in various assignments within the organization related to project design. Travel to job sites to verify design functionality. Work types can vary, but often involve designing for overhead/underground power for roadway/DOT, waterway, and railroad crossing projects. Will assist with additional design/engineering project tasks as needed.
Some of the essential job functions
Collects data by visually identifying, inspecting, and recording equipment and structures in the field and maps data collected.
Executes work orders for fielding and/or design of infrastructure consistently meeting benchmarks for quality, time, and budget constraints.
Performs 2-D Civil and/or Electrical type design in CAD (i.e., PLS-CADD, AutoCAD, MicroStation), demonstrating an elevated level of proficiency.
Applies comprehensive knowledge of NESC and local code requirements.
Perform planning taking into consideration assessments of current and future power infrastructure needs.
Conducts walkouts alongside contractors to assess the accuracy and quality of completed projects.
Performs a variety of walkouts or kickoff/scope meetings to assist in route analysis, preparation of scope and/or to assist in preparation of bid documents.
Develops, reviews, or presents technical drawings and analysis
Prepares moderate to complex program/project proposals
Perform economic analysis of engineering alternatives taking into consideration costs of construction and maintenance.
Recognized as a safety champion in their work
Takes responsibility for QA/QC activities, formulates lessons learned and creates training tools.
Consults with SMEs or acts as the SME to ensure projects and/or programs meet existing and new regulatory requirements.
Communicates and directs team project objectives, parameters, status, and outcomes to relevant stakeholders.
Coordinates with Operations management on the allocation of personnel to meet project objectives.
Collaborate with supervisors to provide feedback to assist in coaching and development of associates as necessary
Liaison between Sigma and the client for issues arising from the field.
Other duties as assigned.
Requirements:
General Requirements
Education Requirements : Bachelor of Science degree from an ABET Accredited Engineering College or a Bachelor of Science degree in Engineering Technology.
Experience Requirements : 5+ years of experience in the Electrical Utility Industry.
Active Professional Engineering License : Licensed in Texas is required
Proficient in interpreting and comprehending intricate engineering schematics with precision.
Displays a foundational grasp of the pertinent standards, codes, and regulations within the assigned fields.
Demonstrates articulate verbal and written communication skills, presenting ideas with clarity and coherence.
Exhibits advanced collaborative abilities, actively participating in information exchange and seeking assistance as needed while collaborating harmoniously with team members.
Mastery in swiftly acquiring and navigating customer specific proprietary software and other computer systems to streamline and enhance the work order process.
Possesses adept financial skills, contributing to informed and prudent business decision-making.
Acquired knowledge extends beyond basic familiarity, encompassing the utilization of established concepts, practices, and procedures within electrical and/or civil engineering domains.
Demonstrates advanced computer literacy, particularly in Microsoft Word, Excel, and Outlook.
Able to work in all weather conditions.
Willing and able to travel overnight during the week.
Dependable transportation and valid driver’s license and insurance.
Able to pass a background check/drug test/driving record check.
Authorized to work in the United States.
Physical Requirements:
Must be able to endure frequent/lengthy: Driving, standing, walking long distances (5 miles or more in a day), navigating rough terrain on foot, and lifting/balancing objects that may weigh up to ~40 lbs. and require the use of upper extremities and back muscles; work in proximity to moving vehicles in the right of way.
Must be able to endure sitting for prolonged periods of time, including driving in a vehicle.
Must have the physical ability to perform activities such as visually identifying, inspecting, and measuring objects as well as transcribing notes in proximity to moving vehicles in the right of way; these activities require close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.
Must be able to endure frequent, lengthy periods of sedentary work and sit for prolonged periods of time.
Must be able to utilize a computer keyboard, computer monitor, and telephone for prolonged periods of time.
Must have the physical ability to perform activities such as preparing and analyzing data and figures, transcribing notes, and viewing a computer terminal; these activities require close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.
Must have the physical ability to express or exchange ideas by means of the spoken word and convey detailed or important spoken instructions to other workers accurately, often in a group setting.
Must have the ability to receive detailed information through oral communication, and to make the discriminations in sound.
Skills/Competencies
Professional Engineer | Power Distribution Design | Make-Ready Engineering | Joint-Use Design | Electrical Distribution | Overhead and Underground Design | Utility Design | Power System Planning | Grid Modernization | Smart Grid | Substation Design | NESC Compliance | Distribution Automation | Project Management | Electrical Engineering | CAD Software | GIS Mapping | Load Flow Analysis | Electrical Safety | Regulatory Compliance | Field Engineering | Network Design | Grid Resilience | Renewable Integration | Utility Infrastructure | Arc Flash Analysis | Pole Loading Analysis
This job advertisement should not be interpreted as all-inclusive. It is intended to identify the major responsibilities and requirements of a job. The individual may be required to perform job-related responsibilities and tasks other than those stated in this ad. This advertisement does not constitute an employment agreement between Sigma and the employee and is subject to change by Sigma as the needs of the organization and/or the requirements of the function change.
Pay is commensurate with experience and education. Sigma is an equal opportunity employer and will not discriminate based on an employee’s race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any other classification protected by law.
PM22
#Remote
PI0d4a2749c349-37344-39899953
Date Posted:
2026-02-27Country:
United States of AmericaLocation:
US-AZ-TUCSON-810 ~ 1151 E Hermans Rd ~ BLDG 810 (External Site)Position Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Active and existing security clearance required on day 1At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
The Naval Power Engineering Execution Team is seeking a highly motivated Integrated Product Team Lead for the Evolved Sea Sparrow Missile (ESSM) portfolio within the Shipboard Missiles Sub-Strategic Business Unit (SSBU).
This position requires a strong leader to also serve as Chief Product Owner (CPO) for the Systems Integration & Test (SI&T) Agile Release Train (ART) spanning both the Development and Production Design Value Streams (DVSs). The CPO is setting up the vision and plan for the team, responsible for removing barriers, and defining solutions that support the program and deliverables.
In addition, it is expected this leader will work across all Raytheon functional organizations to staff the IPT and ensure the timely start-up and delivery of products in accordance with the supported contract(s).
This is an onsite position located in Tucson, AZ.
What You Will Do
Serve as ESSM’s primary interface to the NATO Sea Sparrow Project Office (NSPO) Test & Evaluation community.
Work across multiple design value streams spanning development, production and sustainment by serving customer needs and delivering capabilities in support of various contracts. Negotiate and balance priorities among multiple contracted efforts and customers while ensuring on-time delivery and execution.
Primary responsible for schedule and cost execution of multiple CLINs within Design Agent contract. This includes direct Cost Account Management (CAM) responsibilities as well as delegation of CAM responsibilities to members within team.
Support Agile ceremonies such as Increment Planning, Sprint Planning, Sprint Retrospectives and work closely with Agile Release Train Engineer (RTE) to ensure the team’s backlog is prioritized, well defined with acceptance criteria, and executable to achieve the program goals and contractual deliveries.
Own and define team’s vision and execution strategy to achieve program goals and contractual deliveries while managing dependencies across functional organizations to ensure on-time contractual deliveries.
Develop executable build schedules for various integration and test assets and production units, ensuring and facilitating cross-functional coordination, collaboration and communication to support on-time deliveries.
Remove barriers and ensure the team is properly staffed and resourced to support the program goals and contractual deliveries.
Mentor and coach junior engineers within the team and foster a healthy team environment.
Support weekly ESSM Block 1 and 2 Flight Test Working Group (FTWG) with NSPO, PHD, Corona and other test support teams. Align customer domestic and international flight test schedules and needs with Raytheon’s expected support.
Support NSPO Telemetry Working Group (TMWG) as required.
Qualifications You Must Have
Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 10 years of prior relevant experience.
Experience working with Manufacturing and Production Systems and Processes.
PM Level 6 certification or able to obtain PM Level 6 certification within 1 year,
Experience in programs utilizing Agile Framework, and understanding of and experience working in an Agile SI&T environment.
Prior IPTL, or Cross Product Team Lead (CPTL) experience.
Must be willing to travel to support Technical Interchange Meetings (TIMs) and other customer/program meetings as necessary.
Active and transferable Secret U.S. government issued security clearance is required prior to start date with the ability to obtain special program access prior to start. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.
Qualifications We Prefer
Advanced Degree in Electrical Engineering, Mechanical Engineering, Aerospace Engineering, or similar Engineering discipline.
Strong leadership skills and project management experience.
Strong interpersonal and communication skills; both verbal and written.
What We Offer
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation
Relocation Eligibility.
Learn More & Apply Now
Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 132,400 USD - 251,600 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.
Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.
What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.
Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.
Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.
Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.
Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.
Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.
Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.
Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.
Specific options depend on the Sailor's status, training, and current Navy policy.
Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.
Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.
Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.
Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.
Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.
It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.
Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.
- 3rd Shift Houston, TX 77041 9:00 PM to 5:30 AM Must be flexible to work, train or help on 1st and/or 2nd shift Position Summary The Quality Technician will assist in all aspects of the Quality inspection program including auditing components or materials, inspection planning, execution, and follow-up if necessary for purchased parts.
QA Technician reviews protocols, qualifications, First Article and Incoming Material validation procedures documented by the organization and follow those procedures.
If a purchased product does not meet quality specifications, the QA Technician investigates, documents, and reports the findings.
Positions Responsibility May include: Inspect new or revised purchased parts, received and/or production parts as per the sampling plan and inspection plan Provide disposition on the line on daily basis & team up with the Production, Supplier Quality departments and Suppliers to identify root causes and implement corrective actions.
Data Entry in Live Source and transaction for VR in MAPICS Document Non-Conformances and communicate the Non-Conformances with the appropriate authorities Read, interpret and follow Engineering BOM, drawings, inspection plans, work instructions Assist QA leadership in continuous improvement projects as assigned.
Inspect and provide data for dimensional characteristics as needed to assist quality investigations Transfer items in or out of the QA inventory locations Communicate the part status as needed to other functional departments and individuals Nature and Scope Possesses a broad theoretical job knowledge typically obtained through advanced education Has no discretion to deviate from established procedures by performing structured work assignments Work is closely supervised Problems faced are not typically difficult nor complex Required Skills Microsoft Office intermediate level Basic print and GD&T interpretation skills Quality tools: Systemic data collection and sampling.
1+ years Recent Hands on experience with measurement tools such a caliper, micrometer, high gauge, pin gauges High level of attention to detail Effective verbal and written communication skills Ability to be independent and self-disciplined, allowing for timely audit report submission and follow up.
Explains facts, policies and practices related to job area Strong team player, results orientated, dedicated to excellence and sense of urgency to achieve business objectives.
Ability to use good judgement and strong work ethics and integrity on the job Ability to establish positive working relationships with internal and external customers and employees Attention to detail and accuracy, effective organizational and time management skills Able to accurately and timely complete reports Ability to apply good judgement, strong work ethics and integrity on the job.
Physical Requirements/Work Environment Must be able to perform essential responsibilities with or without reasonable accommodations.
Must be able to walk 3 to 5 miles a day.
Standing, walking, bending, stooping, etc.
to move, view and transfer product.
May be required to lift, carry, and/or move up to 40 lbs.
Will work with and around fiberglass and insulation
Supervisor - Make Ready Power Design (Remote)
(Remote) Company HQ: Ohio
Are you an experienced Power Utility Designer, Team Lead, or Supervisor? If you are open to joining a supportive, passionate team, we have an attractive opportunity for you!
Sigma Technologies is a growing engineering and design firm with over 500 team members across 30+ states. For more than 25 years, our work for the power and telecommunications industries has helped accelerate and fortify positive impact in communities across the country. Our core values — Safety, Honesty, Truth, and Decency — fuel our culture. We are TeamSigma™.
**To learn more about working at Sigma, view our video and career page.
**If you do not have the experience required for this role, please refer to our other open positions: **While we list our openings in multiple locations, you only need to apply to one as they are remote.
Please note: This position can work fully remotely, but new hires will be required to come to our main office located in Perrysburg, OH for an initial 2 week in-person paid orientation and training period.
Position Description: Project Supervisors are responsible for one or more of the following areas on a specific project/program: Functional Performance, Project Reporting, and/or Personnel Performance. Project Supervisors demonstrate technical expertise and leadership and should be familiar with the commonly used concepts, practices, and procedures in electrical and/or civil engineering environments, preferably in the utility industry, and be able to rely on their experience and judgment to plan and accomplish goals. Supervisors are expected to be able to recommend new and/or improvements to documentation and implement approved changes. While their focus is on the assigned project functions, the failure of their team/area to achieve objectives will impact overall project/program deadlines and results.
The Design Supervisor:
- Provides first-level leadership: Supervises and leads a team or functional activities daily
- Concurrently perform the work of those they supervise
- Provides support to key duties of the Project Manager / Project Engineer
- Assists in the process to review function/project procedures, specifications, and standards
- Works with Project Engineer to set priorities for a team to ensure task completion; coordinates work activities for team members.
- Provides cross-functional representation
- Mentor team members in professional development
- Responsible for performance management of team members
- Complete and deliver annual performance reviews for assigned staff
- Provides input on disciplinary actions
- Adapts management to changing conditions and supports associates affected by the change.
Requirements:
Education/Experience Requirements:
- EDUCATION: High School Diploma or equivalent required, Associates degree or higher is preferred
- EXPERIENCE: 3+ years of experience in the Electric Utility Industry is required; previous experience as a supervisor/manager is strongly preferred
- Advanced field, drafting, and/or design knowledge
- Identified leadership skills
- Familiar with basic concepts, practices, and procedures used in general personnel management
- Strong technical knowledge, oral and written communication skills
- Ability to develop plans and organize work to ensure efforts are focused, resources are aligned, progress is monitored, and targets are met.
- Strong interpersonal skills and the ability to work within a team
- Basic financial management skills
- Ability to learn and operate customer-based proprietary software
- Is available during the “core” work hours of 8:00 a.m. to 5:00 p.m. Eastern Time - evening and/or weekend work may be required as duties demand
- Willing and able to travel as needed, including overnight travel
- Dependable transportation and valid driver’s license and insurance
- Able to pass a background check/drug test/driving record check
- Authorized to work in the United States
Physical Requirements:
- Must be able to endure frequent, lengthy periods of sedentary work and sit for prolonged periods of time, including sitting at a desk or driving in a vehicle.
- Must be able to utilize a computer keyboard, computer monitor, and telephone for prolonged periods of time.
- Must have the physical ability to perform activities such as preparing and analyzing data and figures, transcribing notes, and viewing a computer terminal; these activities require close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.
- Must have the physical ability to express or exchange ideas by means of the spoken word and convey detailed or important spoken instructions to other workers accurately, often in a group setting.
- Must have the ability to receive detailed information through oral communication
WHAT WE OFFER: We want our Associates to stay healthy, happy, and secure! We offer you a positive work environment with supportive coworkers, managers, and leaders, plus:
- Competitive pay
- Medical, dental and vision plans with up to 80% of the premium sponsored by Sigma
- 401(k) plan with matching contributions up to 5% of salary
- Paid holidays, vacation, and sick time
- Education and professional licensing assistance programs
This job advertisement should not be interpreted as all-inclusive. It is intended to identify the major responsibilities and requirements of a job. The individual may be required to perform job-related responsibilities and tasks other than those stated in this description. This advertisement does not constitute an employment agreement between Sigma and the employee and is subject to change by Sigma as the needs of the organization and/or the requirements of the function change. Pay is commensurate with experience and education. Sigma is an equal opportunity employer and will not discriminate based on an employee’s race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any other classification protected by law.
PM22
#Remote
PI4f1c2abd992f-38
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
What will you do?
- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
MINIMUM QUALIFICATIONS
Education:
- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
Experience:
- 8 years' experience in mechanical design and integration of mission-critical systems.
- Proven track record of successful system designs and implementations in a relevant industry
- Strong understanding of mechanical systems, integration strategy, and system coordination
- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
- Excellent problem-solving skills and attention to detail
- Strong communication and teamwork abilities
PREFERRED QUALIFICATIONS
- Master’s Degree in Mechanical Engineering
- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
Power Distribution and Make Ready Designer
Overhead Utility Pole Design • Joint-Use Engineering • NESC-Compliant Make-Ready Work
Location: Tyler, TX (Remote)
Are you an experienced Power Distribution Designer or Make-Ready Designer looking to support meaningful utility engineering projects? Join a team that values accuracy, collaboration, and long-term professional growth.
ABOUT THIS OPPORTUNITY
We are seeking skilled Make-Ready Designers (primary focus) and Power Distribution Designers to support engineering programs for major electric and telecom utilities. Ideal candidates bring demonstrated experience in overhead utility pole design, NESC application, clearance assessment, pole loading analysis, and construction package development. Useful design platforms include DDS, Katapult, O-Calc, GIS, MicroStation, AutoCAD, or client-specific drafting systems.
In this role, you will review field/walkout data, evaluate existing attachment conditions, model pole loading, determine make-ready requirements, and prepare accurate construction-ready deliverables. Applicants without utility pole design or distribution engineering experience will not be considered.
Note: This position is remote, but new hires must attend a 2-week paid, in-person orientation at our Perrysburg, OH headquarters.
WHAT YOU WILL DO
• Execute overhead distribution and make-ready design work orders while meeting quality, time, and budget expectations
• Apply established engineering design standards, NESC requirements, and internal processes
• Perform end-to-end make-ready, joint-use, and/or general distribution design
• Conduct permitting and easement research (pole ownership, ROW, property rights, approvals)
• Collaborate with team members to resolve design challenges and ensure accurate deliverables
• Use design software such as AutoCAD, MicroStation, DDS, PoleForeman, O-Calc, Katapult, or client systems
• Perform quality control reviews when required
• Support additional duties as assigned
TOP COMPETENCIES & SKILLS
Make-Ready Engineering, Joint-Use Design, Pole Loading Analysis, Utility Pole Design, Overhead Distribution Design, NESC Compliance, Utility Engineering, Pole Attachments, Make-Ready Construction, Aerial Design, Utility Coordination, Right-of-Way Permitting, Pole Replacement Design, Make-Ready Estimates, Field Survey Interpretation, CAD for Utility Design, GIS for Utility Design, Electrical Distribution Design, Utility Construction Standards, Telecommunications Make-Ready
Requirements:
WHAT WE’RE LOOKING FOR
• High school diploma or equivalent required; an associate degree or higher in engineering, drafting, or a related field is preferred
• Minimum 2 years of experience in make-ready engineering, joint-use design, or electric power distribution design (3+ years strongly preferred)
• Proven experience in utility pole design, including NESC application, clearance analysis, pole loading concepts, and preparation of construction-ready design packages
• Proficiency with CAD or MicroStation; experience with DDS, Katapult, O-Calc, or similar utility design platforms is strongly preferred
• Solid understanding of power distribution construction practices, with the ability to learn utility-specific proprietary systems efficiently
• Must hold a valid driver’s license, maintain active auto insurance, and pass all required background, drug, and MVR screenings
• Authorization to work in the United States is required
• Willingness to travel occasionally, including minimal overnight travel when project needs require
• Ability to work a standard Monday–Friday schedule aligned to Eastern Time, with Central/Mountain/Pacific adjustments as appropriate
PHYSICAL REQUIREMENTS
• Ability to work for extended periods using a computer keyboard, monitor, and telephone
• Ability to prepare and analyze data, review detailed information, and work with design tools requiring close vision, distance vision, color vision, peripheral vision, depth perception, and focus adjustment
• Ability to communicate effectively through oral and written channels
ABOUT SIGMA TECHNOLOGIES
Sigma Technologies is a growing engineering and design firm with 500+ team members across 30+ states. For over 25 years, we’ve supported major power and telecommunications utilities with work that directly impacts communities nationwide. Our core values — Safety, Honesty, Truth, and Decency — shape how we work and who we hire. We are TeamSigma™.
*To learn more about working at Sigma, view our video and career page.
* If you do not have Power Design experience, please refer to our other open positions: *While Designer openings are listed in multiple locations, you only need to apply to one, as they are remote roles.
WHAT WE OFFER
We want our Associates to stay healthy, happy, and secure. We offer a positive work environment with supportive coworkers, managers, and leaders, plus:
• No-cost monthly healthcare plan option for employees
• Competitive pay
• Medical, dental, and vision plans with up to 80% of the premium sponsored by Sigma
• 401(k) plan with matching contributions up to 5% of salary
• Paid holidays, vacation, and sick time
• Education and professional licensing assistance programs
This job advertisement is intended to outline the primary responsibilities and requirements of the role. It is not all-inclusive. Additional duties may be assigned as needed. This ad does not constitute an employment agreement, and job requirements may change based on organizational needs.
Pay is commensurate with experience and education. Sigma is an equal opportunity employer and does not discriminate based on race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any classification protected by law.
PM22
PI26aca347aca
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
What will you do?
- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
MINIMUM QUALIFICATIONS
Education:
- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
Experience:
- 8 years' experience in mechanical design and integration of mission-critical systems.
- Proven track record of successful system designs and implementations in a relevant industry
- Strong understanding of mechanical systems, integration strategy, and system coordination
- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
- Excellent problem-solving skills and attention to detail
- Strong communication and teamwork abilities
PREFERRED QUALIFICATIONS
- Master’s Degree in Mechanical Engineering
- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
LEADERSHIP AND MANAGEMENT RESPONSIBILITIES
Recruitment and Retention:
· Recruit and interview Process Technicians.
· Communicate criteria to recruiters for Process Technician position candidates.
· Coach technicians in the interviewing/hiring process.
· Monitor team member turnover; identify key factors that can be improved; make improvements.
Employee and Team Development:
· Identify individual and team strengths and development needs on an ongoing basis.
· Create and/or validate training curriculum in area of responsibility.
· Coach and mentor Process Technicians to deliver excellence to every internal and external customer.
Performance Management:
· Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
· Solicit ongoing feedback from Assistant Test Engineering Manager, Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team member based on feedback.
· Express pride in staff and encourage them to feel good about their accomplishments.
· Perform team member evaluations professionally and on time.
· Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
· Coordinate activities of large teams and keep them focused in times of crises.
· Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
Communication:
· Provide communication forum for the exchange of ideas and information with the department.
· Organize verbal and written ideas clearly and use an appropriate business style.
· Ask questions; encourage input from team members.
· Assess communication style of individual team members and adapt own communication style accordingly.
TECHNICAL MANAGEMENT RESPONSIBILITIES
· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· Provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university; and three to five years experience
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.
Remote working/work at home options are available for this role.
