Engineering Jobs in Bothell Wa Flexible

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer, you will play a vital role in our commitment to excellence in aviation by ensuring the safety and quality of our aircraft. Your expertise will be essential as you meticulously verify parts and fasteners against stringent specifications, set up assembly tools, and align components based on engineering drawings and installation plans. In this dynamic environment, you will engage in the installation and rework of various interior parts and assemblies, enhancing both functionality and aesthetics. Your dedication to quality will shine through as you conduct thorough inspections of your work, ensuring compliance with our high standards and promptly addressing any discrepancies.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation

Position Responsibilities

• Review job assignments using bar charts, SOI, IP, and consult with leads to obtain necessary drawings.

• Locate work areas using drawings and electronic resources that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials for accuracy and suitability.

• Determine and obtain the correct fasteners from PCA/MMO control per specifications.

• Set up assembly tools according to tooling instructions, ensuring locators are correct for the model.

• Align and secure parts on the airplane using tooling holes and clamps, checking for proper margins.

• Install and rework interior parts and assemblies, including carpets, stowbins, and seats.

• Select and use appropriate drill bits, reamers, and countersinking tools for pilot and full-size holes.

• Drill, ream, and countersink holes in parts/assemblies per specifications and instructions.

• Disassemble parts, deburr holes, and prepare surfaces for fastener installation.

• Apply sealants, primers, adhesives, and corrosion-inhibiting compounds as required by specifications.

• Install fasteners in the correct sequence using appropriate tools, adhering to specifications.

• Mark and symbolize work for subsequent riveting and install cables and wire bundles as needed.

• Inspect completed work for defects, ensuring compliance with engineering drawings and report any job handicaps.

• Move kits, carts, and equipment within the work cell to facilitate workflow and maintain personal and tool certifications.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications

• 1+ years of experience in manufacturing, automotive, construction, aerospace or similar industry; this can include education and Military.

• 1+ years of experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using hand and power tools

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel.

• Ability to wear hearing protection (ear inserts, canal caps, earmuffs); eye protection.

• Ability to use hazardous chemicals.

Preferred Qualifications:

• 1+ years of experience installing aerospace components, construction or automotive assemblies with precision measurement tools, hand and power tools.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Pay : $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 15, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.

We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.

Find your future with us.The 777-8 F Airplane Level Integration Team (ALIT) organization has an exciting opportunity for a Systems Engineering and Integration Manager (Level K) to join our team in Everett, Washington .Position Overview: In this role, you will lead activities critical to the success of the 777-8 F derivative within the 777 X family, such as functional integration, requirements integration, and/or development assurance oversight.

This role will lead teams that own critical program-level deliverables and processes within systems engineering, provide systems engineering expertise and guidance to program Integrated Product Teams (IPTs), and develop artifacts necessary for aircraft certification.

You will have the opportunity to interface with program internal and external organizations such as Engineering Integrated Product Teams, Systems Engineering core, and global partners.The ideal candidate is adaptable, demonstrates curiosity and a learning mindset, has previous experience in Systems Engineering, and has proven ability to lead cross functional teams through complex technical issues.Position Responsibilities: Lead the management and execution of systems engineering activities across the 777-8 F program Lead the development of systems engineering artifacts such as airplane and system-level functional decomposition, functional analysis reports, requirements validation & verification, and program plans and guidance materials Drive accountability for completion of systems engineering activities Integrate amongst program teams to resolve technical risks and issues Manage, develop, and motivate employees Develop and maintain relationships with stakeholders, peers, partners, and team members Develop and execute project and process plans, implement policies and procedures and set operational goals Provide oversight, guidance, and approval of technical approaches, products, and processesWork Authorization:This position is expected to be 100% onsite.

The selected candidate will be required to work onsite at Everett, WA.Basic Qualifications (Required Skills/Experience): Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement 7+ years of engineering experience in the aerospace or similar industry5+ years of experience leading teams in a formal and/or informal leadership role5+ years in Systems Engineering or Design Engineering (e.g.

Systems, Flight Sciences, Interiors, Propulsion, Safety)Fundamental understanding of systems engineering principles (e.g.

requirements, development assurance, and/or functional integration)Ability to effectively navigate and lead a team through dynamic and ambiguous environmentsPreferred Qualifications (Desired Skills/Experience):1+ years of engineering management experience5+ years of experience leading cross-functional teams to resolve complex technical issuesAbility to communicate complex concepts clearly across different audiences and varying levels of the organizationExperience with leading technical cross functional teams, working across organizational boundaries, and ensuring an inclusive environment

Familiarity with the 777 X family of aircraftConflict of Interest:Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union:This is not a union-represented position.Pay and Benefits:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.

Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations.Summary Pay Range:$151,000
- 205,000Applications for this position will be accepted until Mar.

30, 2026Export Control Requirements:This position must meet U.

S.

export control compliance requirements.

To meet U.

S.

export control compliance requirements, a "U.

S.

Person" as defined by 22 C.

F.

R.

§120.62 is required.

"U.

S.

Person" includes U.

S.

Citizen, U.

S.

National, lawful permanent resident, refugee, or asylee.Export Control Details:US based job, US Person requiredEducationBachelor's Degree or Equivalent RequiredRelocationThis position offers relocation based on candidate eligibility.Visa SponsorshipEmployer will not sponsor applicants for employment visa status.ShiftThis position is for 1st shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.

Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.

We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.

Find your future with us.Boeing Commercial Airplanes is seeking an Experienced (Level 3) or Senior (Level 4) Model Based System Engineer to join our Product Security Engineering (PSE) Product Development and Innovation team in Everett, WA or Seattle, WA.

This position will be responsible for ensuring security, safety, and resilience of all digitally connected systems, focused on partnering with BCA and Enterprise Digital Transformation Engineering teams to develop tools and processes, to be used to provide security artifacts for airplane and system development in support of certification.Primary responsibilities:Design, develop, test, and deploy new Digital Engineering features and capabilities for the Boeing Commercial Airplanes Product Security Engineering functionEnsure and maintain the quality of the MBSec Solution Kit (SK) models, processes, and templatesManage PSE Digital Engineering project access control, permissions management, project structure, and to help implement related Access Control PoliciesWork with PSE Enterprise and MBSec Technical Lead, Development Lead, and Scrum-Master to define and execute "releases" of the MBSec SK and other PSE Digital Engineering capabilities per the PSE Digital Engineering technical roadmapWork with the MBSec Development Lead and Scrum-Master to define new features to add and align within the PSE Digital Engineering technical roadmapWork with the PSE Engineering Integration Lead to align MBSec SK, and other PSE Digital Engineering tools, with defined enterprise and BCA PSE Engineering Capabilities and engineering activitiesParticipate in peer reviews and technical reviews related to PSE Digital Engineering features and capabilitiesManage the deployment and implementation of MBSec across multiple BCA programs for Product Security EngineeringDevelop and define training materials, courses, and pathways for PSE Digital Engineering tools and capabilities.Train and teach PSEs from across the enterprise in the use of PSE Digital Engineering tools and capabilitiesParticipate as a contributor to the Enterprise PSE community for Model Based Solution Kits and Design PracticesWork in and utilize agile methodologies for planning and execution of tasks across the teamDefine and craft the technical capabilities roadmap for PSE Digital EngineeringBasic Qualifications (Required Skills and Experience): Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement Level 3: 5+ years of related work experience or an equivalent combination of education and experience Level 4: 9+ years of related work experience or an equivalent combination of education and experience Experience with Model Based Engineering tools and languages such as Enterprise Architecture, Cameo, Magic Draw, UML/Sys ML, 3 DX, CATIA Experience with system security engineering or systems engineering Experience with analysis of requirements, architecture, design, and product designPreferred Qualifications (Desired Skills and Experience): Accredited degree or certificate in Systems Engineering with a focus or emphasis on Model Based Systems Engineering (MBSE) Experience in Airplane System Development, Product Security, Cybersecurity, or Systems Security Engineering Demonstrated history of performance in systems, systems security, or software engineering throughout the course of engineering or operations lifecycle Highly motivated and exhibit strong written and verbal communication, inter-personal, and problem-solving skills Experience with Model Based Engineering languages and frameworks such as UAF, Do DAF, MODAF, AADL, UPDM etc Experience with formalized semantics and semantic modeling languages and frameworks such as RDF, OWL, SPARQL, and TTL Understanding and working knowledge of various standards, including: DFARS Clause 252.204-7012, CNSSI 1253, DOD 8570, NIST 800-160, NIST 800-53 (and 53 A), NIST 800-30, NIST 800-171, NIST 800-55, NIST 800-137, NIST 800-39 etcDrug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.

Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations.Summary Pay Range :Experienced (Level 3): $137,700
- $186,300Senior (Level 4): $173,400
- $234,600 Applications for this position will be accepted until Mar.

28, 2026Export Control Requirements:This position must meet U.

S.

export control compliance requirements.

To meet U.

S.

export control compliance requirements, a "U.

S.

Person" as defined by 22 C.

F.

R.

§120.62 is required.

"U.

S.

Person" includes U.

S.

Citizen, U.

S.

National, lawful permanent resident, refugee, or asylee.Export Control Details:US based job, US Person requiredEducationBachelor's Degree or Equivalent RequiredRelocationThis position offers relocation based on candidate eligibility.Visa SponsorshipEmployer will not sponsor applicants for employment visa status.ShiftThis position is for 1st shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.

Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Who We Are

Johns Manville is a leading manufacturer and marketer of premium-quality insulation and commercial roofing, along with glass fibers and nonwovens for commercial, industrial and residential applications. Our products are used in a wide variety of industries including building products, aerospace, automotive and transportation, filtration, commercial interiors, waterproofing and wind energy.

A proud member of the Berkshire Hathaway family of companies, we serve customers in more than 80 countries around the globe. We are committed to delivering positive and powerful experiences, because we are successful only when our employees and customers thrive. We are passionate, we care about people, we perform at a superior level, and we protect others and our environments.

Pay Range

This is the base salary pay range that an applicant can expect to make upon hire. Pay within this range will vary based upon relevant experience, skills, and education among other factors. In addition, this position is eligible for an incentive bonus.

The Corporate Environmental Manager will be responsible for ensuring JM manufacturing facilities are in compliance with applicable regulations, identifying and implementing programs that improve factory environmental performance, communicating environmental issues and progress at all levels in the company, and mentoring and developing factory environmental staff. This position is accountable, along with plant managers, for eliminating or reducing factory environmental violations, tracking factory performance metrics, renewing and amending environmental operating permits, leading the development of air pollution construction permits and implementing new programs to address emerging regulations.

Your Day to Day:

• Develop and implement environmental compliance systems and programs for JM's factory operations and employees
• Represent the company with state and federal agencies for air permitting and other issues as required
• Provide regulatory guidance for all environmental media to manufacturing facilities and ensure that compliance systems are adequate to track and document compliance status
• Review all major capital projects and provide environmental impact assessments
• Actively audit factory environmental performance for JM locations and ensure that audit findings are addressed and corrected where appropriate
• Provide regulatory guidance for all environmental media to manufacturing facilities and ensure that compliance systems are adequate to track and document compliance status
• Represent the company with state and federal agencies for air permitting and other issues as required
• Effectively communicate the environmental goals, objectives, performance expectations, and metrics throughout the organization
• Mentor, train, and develop JM factory environmental employees
• Develop and implement management systems to ensure seamless leadership for JM's business environmental activities
• May be required to perform other related duties as assigned

What You Bring to the Team:

• Bachelor's degree in environmental management, engineering or a related field or equivalent experience with a minimum of 8 years in implementing and managing environmental programs and initiatives
• Master's degree with a minimum of 6 years of experience preferred
• Significant knowledge of federal, state and local environmental laws and regulations relating to air, water, solid waste and hazardous waste management
• The ability to develop and implement environmental compliance systems and programs for JM's factory operations and employees
• Solid ability to develop, implement and lead group environmental management programs for the JM's businesses to ensure full compliance with regulations and company requirements
• Demonstrated ability to mentor, train, and develop JM factory environmental employees
• Develop and implement management systems to ensure seamless leadership for JM's business environmental activities
• Solid knowledge of emission inventory development
• Solid leadership skills
• Excellent interpersonal, verbal and written communication skills
• Ability to work both independently and in a diverse team environment
• Heavy travel required (Minimum 30%)
• May be required to lift, carry, push or pull up to and including 25 pounds
• Work environment is typical of an office setting

#LI-KL1 #LI-ONSITE #P #D

Please Keep in Mind

If you do not meet 100% of these requirements, we at JM still want to hear from you. So, if you are interested in the role, we encourage you to apply so we can learn how your skills and talents can contribute to our team.

Benefits

Johns Manville (JM) offers a wide range of benefits to employees. Some are subsidized by the company and others are fully employee-paid. Health benefits include a choice of comprehensive medical plans, a dental plan, vision plan, wellness program and critical illness insurance. JM sponsors a 401(k) plan which includes a sizeable company match. JM offers paid vacation and also provides paid sick and parental leave for eligible employees.

Additionally, Johns Manville provides basic life Insurance, short-term and long-term disability coverage, an employee assistance program, and business travel accident coverage. Supplemental life insurance and accidental death and dismemberment insurance are available as well. The company also offers a variety of tax saving accounts; health spending account, traditional flexible spending account, and a dependent care spending account. JM also offers a tuition reimbursement program for undergraduate and certain graduate programs.

Johns Manville supports employee growth with vast educational opportunities and a company-wide mentoring program. This program pairs employees and leaders to grow skills, build stronger internal networks and strengthen the company’s succession planning process. Johns Manville also offers soft and hard skills training facilitated by internal and external presenters. Our talent management team prioritizes the holistic growth of our workforce.

Diversity & Inclusion

Johns Manville believes diversity and inclusion in our workplace is critical for the long-term success of our company. We are committed to retaining, developing and attracting a diverse workforce that fosters an inclusive work environment in which all employees are treated with dignity and respect. This is the right thing to do for our employees, our company and our communities.

Incumbent must be physically able to perform essential job functions. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions.

We are proud to be an Equal Opportunity/Affirmative Action employer. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

Johns Manville is a proud member of the Berkshire Hathaway family of companies, serving customers in more than 80 countries, supplying innovative products to the construction, aerospace, automotive, filtration and energy industries. With a more than 160-year legacy, we understand that our story continues to grow only with the right people saying, thinking and doing the right things. Make your story our story.

Johns Manville believes diversity and inclusion in our workplace is critical for the long-term success of our company. We are committed to retaining, developing and attracting a diverse workforce that fosters an inclusive work environment in which all employees are treated with dignity and respect. This is the right thing to do for our employees, our company and our communities.

PIae633f215d0e-37344-39995487

Sr. Data Engineer (Hybrid)

Chicago, IL

The American Medical Association (AMA) is the nation's largest professional Association of physicians and a non-profit organization. We are a unifying voice and powerful ally for America's physicians, the patients they care for, and the promise of a healthier nation. To be part of the AMA is to be part of our Mission to promote the art and science of medicine and the betterment of public health.

At AMA, our mission to improve the health of the nation starts with our people. We foster an inclusive, people-first culture where every employee is empowered to perform at their best. Together, we advance meaningful change in health care and the communities we serve.

We encourage and support professional development for our employees, and we are dedicated to social responsibility. We invite you to learn more about us and we look forward to getting to know you.

We have an opportunity at our corporate offices in Chicago for a Sr. Data Engineer (Hybrid) on our Information Technology team. This is a hybrid position reporting into our Chicago, IL office, requiring 3 days a week in the office.

As a Sr. Data Engineer, you will play a key role in implementing
and maintaining AMA's enterprise data platform to support analytics,
interoperability, and responsible AI adoption. This role partners closely with
platform engineering, data governance, data science, IT security, and business
stakeholders to deliver highquality, reliable, and secure data products. This
role contributes to AMA's modern lakehouse architecture, optimizing data
operations, and embedding governance and quality standards into engineering
workflows. This role serves as a
senior technical contributor within the team-providing mentorship to junior
engineers and implementing engineering best practices within the data platform function,
in alignment with architectural direction set by leadership.

RESPONSIBILITIES:

Data Engineering & AI Enablement

• Build and maintain scalable data pipelines and
  ETL/ELT workflows supporting analytics, operational reporting, and AI/ML use
  cases.
• Implement best practice patterns for ingestion,
  transformation, modeling, and orchestration within a modern lakehouse
  environment (e.g., Databricks, Delta Lake, Azure Data Lake).
• Develop highperformance
  data models and curated datasets with strong attention to quality, usability,
  and interoperability; create reusable engineering components and automation.
• Collaborate with the Architecture Team, the Data
  Platform Lead, and federated IT teams to optimize storage, compute, and
  architectural patterns for performance and costefficiency.
• Build model-ready data sets and feature
  pipelines to support AI/ ML use cases; serve as a technical coordination point
  supporting business units' AI-related infrastructure needs.
• Collaborate with data scientists and AI Working
  Group to operationalize models responsibly and maintain ongoing monitoring
  signals.

Governance, Quality & Compliance

• Embed data governance, metadata standards,
  lineage tracking, and quality controls directly into engineering workflows;
  ensure technical implementation and alignment within engineering workflows.
• Work with the Data Governance Lead and business
  stakeholders to operationalize stewardship, classification, validation,
  retention, and access standards.
• Implement privacybydesign and securitybydesign
  principles, ensuring compliance with internal policies and regulatory
  obligations.
• Maintain documentation for pipelines, datasets,
  and transformations to support transparency and audit requirements.

Platform Reliability, Observability & Optimization

• Monitor and troubleshoot pipeline failures,
  performance bottlenecks, data anomalies, and platformlevel issues.
• Implement observability tooling, alerts,
  logging, and dashboards to ensure endtoend reliability.
• Support cost governance by optimizing compute
  resources, refining job schedules, and advising on efficient architecture.
• Collaborate with the Data Platform Lead on
  scaling, configuration management, CI/CD pipelines, and environment management.
• Collaborate with business units to understand
  data needs, translate them into engineering requirements, and deliver
  fit-for-purpose data solutions; share and apply best practices and emerging
  technologies within assigned initiatives.
• Work with IT Security and Legal/ Compliance to
  ensure platform and datasets meet risk and regulatory standards.
  

Staff Management

• Lead, mentor, and provide management oversight
  for staff.
• Responsible for setting objectives, evaluating
  employee performance, and fostering a collaborative team environment.
• Responsible for developing staff knowledge and
  skills to support career development.

May include other responsibilities as assigned

REQUIREMENTS:

1. Bachelor's degree in Computer Science, Engineering, Information Systems, or related field preferred or equivalent work experience and HS diploma/equivalent education required.
2. 5+ years of experience in data engineering within cloud environments
3. Experience in people management preferred.
4. Demonstrated hands-on experience with modern data platforms (Databricks preferred).
5. Proficiency in Python, SQL, and data
   transformation frameworks.
6. Experience designing and operationalizing
   ETL/ELT pipelines, orchestration workflows (Airflow, Databricks Workflows), and
   CI/CD processes.
7. Solid understanding of data modeling,
   structured/unstructured data patterns, and schema design.
8. Experience implementing governance and quality
   controls: metadata, lineage, validation, stewardship workflows.
9. Working knowledge of cloud architecture, IAM,
   networking, and security best practices.
10. Demonstrated ability to collaborate across
    technical and business teams.
11. Exposure to AI/ML engineering concepts, feature
    stores, model monitoring, or MLOps patterns.
12. Experience with infrastructureascode
    (Terraform, CloudFormation) or DevOps tooling.

The American Medical Association is located at 330 N. Wabash Avenue, Chicago, IL 60611 and is convenient to all public transportation in Chicago.

This role is an exempt position, and the salary range for this position is $115,523.42-$150,972.44. This is the lowest to highest salary we believe we would pay for this role at the time of this posting. An employee's pay within the salary range will be determined by a variety of factors including but not limited to business consideration and geographical location, as well as candidate qualifications, such as skills, education, and experience. Employees are also eligible to participate in an incentive plan. To learn more about the American Medical Association's benefits offerings, please click here.

We are an equal opportunity employer, committed to diversity in our workforce. All qualified applicants will receive consideration for employment. As an EOE/AA employer, the American Medical Association will not discriminate in its employment practices due to an applicant's race, color, religion, sex, age, national origin, sexual orientation, gender identity and veteran or disability status.

THE AMA IS COMMITTED TO IMPROVING THE HEALTH OF THE NATION

Power Distribution and Make Ready Designer

Overhead Utility Pole Design • Joint-Use Engineering • NESC-Compliant Make-Ready Work

Location: Kalamazoo, MI / Remote (U.S.)

Are you an experienced Power Distribution Designer or Make-Ready Designer looking to support meaningful utility engineering projects? Join a team that values accuracy, collaboration, and long-term professional growth.

ABOUT THIS OPPORTUNITY
We are seeking skilled Make-Ready Designers (primary focus) and Power Distribution Designers to support engineering programs for major electric and telecom utilities. Ideal candidates bring demonstrated experience in overhead utility pole design, NESC application, clearance assessment, pole loading analysis, and construction package development. Useful design platforms include DDS, Katapult, O-Calc, GIS, MicroStation, AutoCAD, or client-specific drafting systems.

In this role, you will review field/walkout data, evaluate existing attachment conditions, model pole loading, determine make-ready requirements, and prepare accurate construction-ready deliverables. Applicants without utility pole design or distribution engineering experience will not be considered.

Note: This position is remote, but new hires must attend a 2-week paid, in-person orientation at our Perrysburg, OH headquarters.

WHAT YOU WILL DO
• Execute overhead distribution and make-ready design work orders while meeting quality, time, and budget expectations
• Apply established engineering design standards, NESC requirements, and internal processes
• Perform end-to-end make-ready, joint-use, and/or general distribution design
• Conduct permitting and easement research (pole ownership, ROW, property rights, approvals)
• Collaborate with team members to resolve design challenges and ensure accurate deliverables
• Use design software such as AutoCAD, MicroStation, DDS, PoleForeman, O-Calc, Katapult, or client systems
• Perform quality control reviews when required
• Support additional duties as assigned

TOP COMPETENCIES & SKILLS
Make-Ready Engineering, Joint-Use Design, Pole Loading Analysis, Utility Pole Design, Overhead Distribution Design, NESC Compliance, Utility Engineering, Pole Attachments, Make-Ready Construction, Aerial Design, Utility Coordination, Right-of-Way Permitting, Pole Replacement Design, Make-Ready Estimates, Field Survey Interpretation, CAD for Utility Design, GIS for Utility Design, Electrical Distribution Design, Utility Construction Standards, Telecommunications Make-Ready

WHAT WE’RE LOOKING FOR
• High school diploma or equivalent required; an associate degree or higher in engineering, drafting, or a related field is preferred
• Minimum 2 years of experience in make-ready engineering, joint-use design, or electric power distribution design (3+ years strongly preferred)
• Proven experience in utility pole design, including NESC application, clearance analysis, pole loading concepts, and preparation of construction-ready design packages
• Proficiency with CAD or MicroStation; experience with DDS, Katapult, O-Calc, or similar utility design platforms is strongly preferred
• Solid understanding of power distribution construction practices, with the ability to learn utility-specific proprietary systems efficiently
• Must hold a valid driver’s license, maintain active auto insurance, and pass all required background, drug, and MVR screenings
• Authorization to work in the United States is required
• Willingness to travel occasionally, including minimal overnight travel when project needs require
• Ability to work a standard Monday–Friday schedule aligned to Eastern Time, with Central/Mountain/Pacific adjustments as appropriate

PHYSICAL REQUIREMENTS
• Ability to work for extended periods using a computer keyboard, monitor, and telephone
• Ability to prepare and analyze data, review detailed information, and work with design tools requiring close vision, distance vision, color vision, peripheral vision, depth perception, and focus adjustment
• Ability to communicate effectively through oral and written channels

ABOUT SIGMA TECHNOLOGIES
Sigma Technologies is a growing engineering and design firm with 500+ team members across 30+ states. For over 25 years, we’ve supported major power and telecommunications utilities with work that directly impacts communities nationwide. Our core values — Safety, Honesty, Truth, and Decency — shape how we work and who we hire. We are TeamSigma™.

*To learn more about working at Sigma, view our video and career page.
* If you do not have Power Design experience, please refer to our other open positions: *While Designer openings are listed in multiple locations, you only need to apply to one, as they are remote roles.

WHAT WE OFFER
We want our Associates to stay healthy, happy, and secure. We offer a positive work environment with supportive coworkers, managers, and leaders, plus:

• No-cost monthly healthcare plan option for employees
• Competitive pay
• Medical, dental, and vision plans with up to 80% of the premium sponsored by Sigma
• 401(k) plan with matching contributions up to 5% of salary
• Paid holidays, vacation, and sick time
• Education and professional licensing assistance programs

This job advertisement is intended to outline the primary responsibilities and requirements of the role. It is not all-inclusive. Additional duties may be assigned as needed. This ad does not constitute an employment agreement, and job requirements may change based on organizational needs.

Pay is commensurate with experience and education. Sigma is an equal opportunity employer and does not discriminate based on race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any classification protected by law.

PM22
#Remote

PI7087748e2d7e-3631