Engineering Journal Jobs in Montclair

With a passion for life

Join our diverse teams of passionate people and a career that allows you to develop both personally and professionally. At Getinge we exist to make life-saving technology accessible for more people. To make a true difference for our customers - and to save more lives, we need team players, forward thinkers, and game changers.

Are you looking for an inspiring career? You just found it.

Job Responsibilities and Essential Duties

• 
  
• Lead and govern design-related CAPA activities across the R&D organization, ensuring timely, compliant, and effective resolution of complex design, verification, validation, and product performance issues.
  
• Oversee and review root cause investigations using rigorous, data-driven problem-solving methodologies, and ensure corrective and preventive actions are appropriately scoped, risk-based, sustainable, and effectively linked to design controls, risk management, and product lifecycle processes.
  
• Ensure CAPA records and documentation are complete, accurate, and audit-ready, in compliance with FDA regulations, ISO 13485, and internal quality system requirements.
  
• Manage and develop the R&D CAPA team, including setting expectations, prioritizing
  
• workload, providing technical direction, and coaching CAPA specialists and engineers.
  
• Provide technical guidance, coaching, and mentorship to R&D engineers and CAPA owners on CAPA processes, best practices, timeline development, SOP adherence, and effectiveness verification planning.
  
• Serve as the primary R&D CAPA interface with Quality, Regulatory Affairs, Operations, and other cross-functional partners to address systemic and cross-product issues.
  
• Review and approve CAPA plans, timelines, effectiveness verification strategies, and closure rationales to ensure regulatory robustness and high-quality outcomes.
  
• Support internal and external audits, inspections, and assessments by providing CAPA documentation (e.g., CAPA storyboards), investigation rationale, and subject matter expertise.
  
• Act as a CAPA subject matter expert within the R&D organization, driving continuous improvement in CAPA execution quality and consistency.
  

Minimum Requirements

• 
  
• Bachelor's degree in Engineering or related technical field; advanced degree preferred.
  
• 6+ years of experience in R&D within a medical device organization with at least 5 years of CAPA processes and regulatory compliance requirements (FDA, ISO 13485).
  
• 2+ years of leadership experience managing engineering teams.
  
• Proven experience in managing CAPA for design and development activities
  

Required Knowledge, Skills and Abilities

• 
  
• Expert-level understanding of CAPA methodologies, root cause analysis tools (Fishbone, 5 Whys, FMEA), and risk management.
  
• Strong leadership and team management skills with ability to influence and drive accountability.
  
• Excellent analytical and problem-solving abilities with attention to detail.
  
• Effective communication and presentation skills for all organizational levels.
  
• Experience with drafting statistically sound sampling plans & acceptance criteria for measuring Effectiveness of implemented actions.
  
• Proficiency in documentation and electronic CAPA systems, Trackwise preferred.
  
• Deep knowledge of medical device regulations and design control requirements.
  

Salary range: $145k - $175k

#LI-LG1

About us

With a firm belief that every person and community should have access to the best possible care, Getinge provides hospitals and life science institutions with products and solutions aiming to improve clinical results and optimize workflows. The offering includes products and solutions for intensive care, cardiovascular procedures, operating rooms, sterile reprocessing and life science. Getinge employs over 12,000 people worldwide and the products are sold in more than 135 countries.

Benefits at Getinge:

At Getinge, we offer a comprehensive benefits package, which includes:

• 
  
• Health, Dental, and Vision insurance benefits
  
• 401k plan with company match
  
• Paid Time Off
  
• Wellness initiative & Health Assistance Resources
  
• Life Insurance
  
• Short and Long Term Disability Benefits
  
• Health and Dependent Care Flexible Spending Accounts
  
• Commuter Benefits
  
• Parental and Caregiver Leave
  
• Tuition Reimbursement
  

Getinge is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, genetic information, national origin, disability, protected veteran status or any other characteristic protected by law.Reasonable accommodations are available upon request for candidates taking part in all aspects of the selection process.

• 
  
• Develop high quality, well documented engineering configuration and infrastructure solutions that adhere to all applicable clients security standards
  
• Ensure product and infrastructure security is maintained throughout the system lifecycle, integrating new security features, patches, and updates into existing environments
  
• Collaborate with tech leads in understanding system requirements, defining stories, creation of technical designs, and deployment of solutions
  
• Support engineering and other team members to understand systems end-to-end and deliver robust solutions that support positive business impact
  
• Write scripts and automation code to support areas such as operational excellence, production validation, and security for our Windows servers and identity infrastructure platform
  
• Research problems discovered internally or by stakeholders and consumers, ideate and develop solutions to mitigate without negative impact to the business
  
• Bring an applied understanding of relevant and emerging technologies, begin to identify opportunities to provide input to the team and coach others, and embed learning and innovation in the day-to-day
  
• Work on complex problems in which analysis of situations or data requires an in-depth evaluation of various factors
  
• Use programming languages including but not limited to PowerShell, Terraform, ARM templates, etc.
  

• 
  
• Infrastructure: Hyper-V and Windows Server Operating systems
  
• Observability: System Center Operations Manager (SCOM) / Azure Monitoring
  
• Configuration: System Center Configuration Manager (SCCM) / Azure Arc
  
• Identity: Active Directory Domain Services (AD DS) / Microsoft Entra ID
  
• Automation: PowerShell, Infrastructure and Configuration as Code (e.g. Chef, Ansible)
  
• Databases: SQL Server
  

With a passion for life

Join our diverse teams of passionate people and a career that allows you to develop both personally and professionally. At Getinge we exist to make life-saving technology accessible for more people. To make a true difference for our customers - and to save more lives, we need team players, forward thinkers, and game changers.

Are you looking for an inspiring career? You just found it.

Job Overview

The primary responsibility for the Sustaining Engineer II position focuses on Design Verification and Validation activities, supporting testing for regulatory submissions, CAPA execution, writing and executing Test Method Validations, and working with component suppliers. This position will report to the Sustaining Engineering Manager.

Job Responsibilities and Essential Duties

• 
  
• Write and execute protocols, such as Design Validations or Verifications. Compile, analyze and report protocol test data.
  
• Write and execute Test Method Validations. Compile, analyze and report testing data.
  
• Update Design Specifications, Risk Management Plans and Reports, FMEAs, or other risk management documents.
  
• Investigate and plan CAPA activities
  
• Communicate and Coordinate activities with other Getinge sites and outside component suppliers.
  
• Implement documentation changes as needed. (Engineering specifications, change notices, manufacturing procedures, and other documentation).
  
• Comply with Quality System Procedures, Good Lab Practices, and Exposure Control Plan.
  
• Develop processes, methods, tooling, and production controls; supervises their assembly and proofing.
  
• Prepares presentations reflecting the status and results of projects.
  
• Lead small projects that support product enhancement and cost savings opportunities.
  
• This is not an inclusive list of job responsibilities.
  

Minimum Requirements

• 
  
• Bachelor of Science degree (or equivalent), preferably in Biomedical, Mechanical or Manufacturing Engineering with 3-6 years of related experience.
  
• General understanding of Good Manufacturing Practices, FDA regulations, and ISO requirements.
  
• Experience with process and equipment validations/qualifications.
  

Required Knowledge, Skills and Abilities

• 
  
• 
  
  • 
    
  • Experienced with laboratory physical testing methods Validation/Verification
    
  • Process Validation/Verification
    
  • Knowledge with the following systems: CAPA, Risk Management, Design Controls and Change Management
    
  • Must have strong technical and analytical ability; detail oriented.
    
  • Must have good verbal and written communication skills.
    
  • Strong interpersonal skills.
    
  • Good organizational skills. Must be able to adhere to timelines.
    
  • Knowledge of computer skills including, but not limited to: Microsoft Windows, Word, Excel, Project, PowerPoint, Teams, Solidworks
    
  • Basic understanding of statistical analysis.
    
  
  
  

Salary range: $94,000.00 - $97,000.00

#LI-LG1

About us

With a firm belief that every person and community should have access to the best possible care, Getinge provides hospitals and life science institutions with products and solutions aiming to improve clinical results and optimize workflows. The offering includes products and solutions for intensive care, cardiovascular procedures, operating rooms, sterile reprocessing and life science. Getinge employs over 12,000 people worldwide and the products are sold in more than 135 countries.

Benefits at Getinge:

At Getinge, we offer a comprehensive benefits package, which includes:

• 
  
• Health, Dental, and Vision insurance benefits
  
• 401k plan with company match
  
• Paid Time Off
  
• Wellness initiative & Health Assistance Resources
  
• Life Insurance
  
• Short and Long Term Disability Benefits
  
• Health and Dependent Care Flexible Spending Accounts
  
• Commuter Benefits
  
• Parental and Caregiver Leave
  
• Tuition Reimbursement
  

Getinge is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, genetic information, national origin, disability, protected veteran status or any other characteristic protected by law.Reasonable accommodations are available upon request for candidates taking part in all aspects of the selection process.

With a passion for life

Join our diverse teams of passionate people and a career that allows you to develop both personally and professionally. At Getinge we exist to make life-saving technology accessible for more people. To make a true difference for our customers - and to save more lives, we need team players, forward thinkers, and game changers.

Are you looking for an inspiring career? You just found it.

Job Overview

The Sr. R&D Engineer - CAPA Specialist is a senior individual contributor responsible for leading complex, design and/or R&D controlled QMS process related Corrective and Preventive Action (CAPA) investigations within the Research & Development organization. This role drives robust root cause analysis, corrective and preventive action development, and effectiveness verification to ensure product quality, regulatory compliance, and continuous improvement in design and development processes.

Operating with a high degree of autonomy, this position serves as a technical authority and trusted advisor to R&D teams, providing guidance on structured problem-solving, CAPA best practices, and regulatory expectations. While the role does not include people management responsibilities, it plays a critical mentoring and coaching role within the R&D CAPA ecosystem.

Job Responsibilities and Essential Duties

• 
  
• Lead and execute product design and or Design Controls process related CAPA investigations within the R&D organization, from problem definition through implementation and effectiveness verification.
  
• Perform thorough and structured root cause analyses for design, verification, validation, and product performance issues using appropriate analytical tools and data.
  
• Develop and drive robust corrective and preventive actions that are risk-based, technically sound, and aligned with design controls and risk management processes.
  
• Ensure CAPA documentation is accurate, complete, and compliant with FDA regulations, ISO 13485, and internal quality system requirements.
  
• Collaborate closely with cross-functional partners-including Quality, Regulatory Affairs, Operations, and Manufacturing Engineering-to address systemic and cross-functional issues.
  
• Provide technical guidance, coaching, and informal mentorship to R&D engineers and associates on CAPA processes, problem-solving methodologies, and regulatory expectations.
  
• Support CAPA owners in developing realistic timelines, following CAPA SOPs, and defining appropriate effectiveness verification plans and acceptance criteria.
  
• Support internal and external audits and inspections by providing CAPA documentation, investigation rationale, and technical explanations.
  
• Maintain clear traceability between CAPA investigations, corrective actions, effectiveness checks, and related design and risk documentation.
  
• Identify opportunities to improve CAPA execution quality and efficiency and contribute to broader quality system and R&D process improvements.
  
• Serve as a technical CAPA subject matter expert within the R&D organization.
  

Minimum Requirements

• 
  
• Bachelor's degree in Engineering or related technical discipline; advanced degree preferred.
  
• 5+ years of experience in R&D engineering within a medical device organization.
  
• Demonstrated experience managing and executing CAPA activities within product design and development.
  
• Strong understanding of regulatory requirements, including FDA regulations and ISO 13485.
  

Required Knowledge, Skills and Abilities

• 
  
• Expert-level knowledge of CAPA methodologies and root cause analysis tools (e.g., Fishbone, 5 Whys, FMEA) and risk management practices.
  
• Strong analytical and problemsolving skills with exceptional attention to detail.
  
• Ability to provide clear technical guidance and support to junior engineers without direct supervisory responsibility.
  
• Effective verbal and written communication skills for presenting findings across all organizational levels.
  
• Experience creating statistically sound sampling plans and acceptance criteria for effectiveness verification.
  
• Proficiency with CAPA and documentation systems; TrackWise experience preferred.
  
• Indepth knowledge of medical device regulations, design control processes, and quality system expectations.
  

Salary Range: $115k - $140k

About us

With a firm belief that every person and community should have access to the best possible care, Getinge provides hospitals and life science institutions with products and solutions aiming to improve clinical results and optimize workflows. The offering includes products and solutions for intensive care, cardiovascular procedures, operating rooms, sterile reprocessing and life science. Getinge employs over 12,000 people worldwide and the products are sold in more than 135 countries.

Benefits at Getinge:

At Getinge, we offer a comprehensive benefits package, which includes:

• 
  
• Health, Dental, and Vision insurance benefits
  
• 401k plan with company match
  
• Paid Time Off
  
• Wellness initiative & Health Assistance Resources
  
• Life Insurance
  
• Short and Long Term Disability Benefits
  
• Health and Dependent Care Flexible Spending Accounts
  
• Commuter Benefits
  
• Parental and Caregiver Leave
  
• Tuition Reimbursement
  

Getinge is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, genetic information, national origin, disability, protected veteran status or any other characteristic protected by law.Reasonable accommodations are available upon request for candidates taking part in all aspects of the selection process.

With a passion for life

Join our diverse teams of passionate people and a career that allows you to develop both personally and professionally. At Getinge we exist to make life-saving technology accessible for more people. To make a true difference for our customers - and to save more lives, we need team players, forward thinkers, and game changers.

Are you looking for an inspiring career? You just found it.

Job Overview

The Complaint Engineer I conducts complaint investigations to identify causes of reported product defects. The role analyzes complaint data to detect undesirable trends and performs escalation request to drive effective corrective actions. It collaborates crossfunctionally to support timely resolution of product issues and support corrective and preventive actions.

Job Responsibilities and Essential Duties

• 
  
• Perform complaint investigations to determine potential cause(s). This includes evaluating field-reported information, reviewing applicable risk assessments, instructions for use (IFU), trend data, and other relevant documentation. The primary goal is to determine possible failure mechanisms and contributing factors related to the reported issue
  
• Initiate, own and support Corrective and/or Preventive Actions
  
• Perform daily, weekly, monthly data analysis of complaints to identify adverse trends
  
• This is not an inclusive list of job responsibilities
  

Required Knowledge, Skills and Abilities

• 
  
• Bachelor's degree in biomedical engineering, Mechanical Engineering, Electrical Engineering, or related technical discipline.
  
• Minimum of 1 year experience in complaint handling and complaint investigations for medical devices.
  
• General understanding of Good Manufacturing Practices, good Documentation Practices FDA regulations, and ISO requirements.
  
• Experience with Complaint, Corrective and Preventive Actions, Field Actions processes.
  
• Experienced with handling Biohazard materials.
  

• 
  
• Experience with laboratory work in the medical devices industry.
  
• Proficient in Microsoft Office Suite (Power Bi, Excel, Word, Outlook)
  
• Excellent written and verbal communication skills.
  
• Strong problem-solving skills and a passion for investigation and root cause analysis
  
• Strong interpersonal skills.
  
• Good organizational skills. Must be able to adhere to timelines.
  
• Basic understanding of statistical analysis.
  
• Basic understanding of quality systems
  

The base salary for the position is a minimum salary of 85,000 and a maximum of 90,000, plus 8% Annual Bonus

About us

With a firm belief that every person and community should have access to the best possible care, Getinge provides hospitals and life science institutions with products and solutions aiming to improve clinical results and optimize workflows. The offering includes products and solutions for intensive care, cardiovascular procedures, operating rooms, sterile reprocessing and life science. Getinge employs over 12,000 people worldwide and the products are sold in more than 135 countries.

Reasonable accommodations are available upon request for candidates taking part in all aspects of the selection process.

With a passion for life

Join our diverse teams of passionate people and a career that allows you to develop both personally and professionally. At Getinge we exist to make life-saving technology accessible for more people. To make a true difference for our customers - and to save more lives, we need team players, forward thinkers, and game changers.

Are you looking for an inspiring career? You just found it.

Job Overview

The Quality Engineer I Quality Operations specializes in Quality Operations, and is responsible for overseeing and improving the quality of manufacturing processes, ensuring compliance with regulatory requirements, and driving continuous improvement initiatives to enhance product quality and customer satisfaction. You will play a key role in ensuring that our manufacturing operations meet the highest standards of quality and efficiency while adhering to relevant regulations and industry best practices.

Job Responsibilities and Essential Duties

• 
  
• Develop, implement, and maintain quality control processes and procedures for manufacturing operations to ensure compliance with regulatory requirements and industry standards.
  
• Establish and monitor key performance indicators (KPIs) to assess manufacturing quality and identify opportunities for improvement.
  
• Participate/ Lead validation and verification activities for manufacturing processes, equipment, and software systems to ensure they meet quality and regulatory requirements.
  
• Develop/ review validation protocols, execute validation studies, and analyze data to ensure process robustness and reliability.
  
• Ensures through Design Transfer activities the Device Master Records (DMRs) contents are developed, controlled, and maintained leading to Risk based Manufacturing Control Plans.
  
• Support/ Investigate and resolve Out of Tolerance events identified during equipment/ instrument calibrations.
  
• Investigate product nonconformances, conduct root cause analysis, and implement corrective and preventive actions (CAPA).
  
• Track and monitor CAPA effectiveness to ensure issues are resolved and prevented.
  
• Support the Health and Hazard Evaluation process by gathering required data and performing in-depth analysis prior to sharing the information with the Field Action Committee.
  
• Implement corrective and preventive actions (CAPAs) to address root causes and prevent recurrence of quality issues.
  
• Facilitate risk management activities related to manufacturing processes, identifying, and mitigating risks to product quality, safety, and efficacy.
  
• Implement risk-based decision-making processes to prioritize quality activities and allocate resources effectively.
  
• Lead and support continuous improvement projects aimed at enhancing manufacturing processes, reducing defects, and optimizing productivity.
  
• Utilize quality tools and methodologies, such as Six Sigma, Lean Manufacturing, and Statistical Process Control (SPC), to drive process optimization and waste reduction.
  
• Ensure compliance with applicable regulations, including FDA Quality System Regulation (QSR), ISO 13485, and other international standards.
  
• Support both internal and external audits as an SME for Production & Process Controls and presents records of activities related to Design Transfer for New Product Development and Design Changes.
  

Minimum Requirements

• 
  
• Bachelor's degree in engineering, Science, or other related field is required.
  
• Six Sigma Green Belt or other applicable certifications are a plus.
  
• Minimum 1 year experience in Quality or Engineering.
  
• Experience in a medical device or pharmaceutical industry.
  
• Experience with Class III disposable and/or Electro-Mechanical medical devices is preferred.
  
• Knowledge and understanding of the US Food and Drug Administration (FDA) 21 CFR 820, ISO 13485, ISO 14971, EU MDD, and EU MDR. Knowledgeable on specific requirements for Design Controls and Risk Management is preferred.
  
• Knowledge of application & selection of Sampling Plans, to support Risk based Manufacturing Controls Plans.
  
• Project management and leadership experience is desirable.
  
• Knowledge of Microsoft Office Products such as Word, Excel, or equivalent software applications.
  

Required Knowledge, Skills and Abilities

• 
  
• Strong analytical and problem-solving skills.
  
• Excellent communication and interpersonal skills.
  
• Proficiency in quality tools and methodologies (e.g., Six Sigma, FMEA, Gage R&R).
  
• Ability to work effectively in a cross-functional team environment.
  
• Ability to review and understand technical standards and their requirements for products.
  
• Lead improvement initiatives, either independently or as part of cross-functional teams
  

The base salary for this the position is a minimum salary of $87,000 and a maximum of $90,000 with 8% annual bonus

About us

With a firm belief that every person and community should have access to the best possible care, Getinge provides hospitals and life science institutions with products and solutions aiming to improve clinical results and optimize workflows. The offering includes products and solutions for intensive care, cardiovascular procedures, operating rooms, sterile reprocessing and life science. Getinge employs over 12,000 people worldwide and the products are sold in more than 135 countries.

Reasonable accommodations are available upon request for candidates taking part in all aspects of the selection process.

With a passion for life

Join our diverse teams of passionate people and a career that allows you to develop both personally and professionally. At Getinge we exist to make life-saving technology accessible for more people. To make a true difference for our customers - and to save more lives, we need team players, forward thinkers, and game changers.

Are you looking for an inspiring career? You just found it.

JobOverview

The Staff Engineer, Sustainabilityleads sustainability initiatives across product development, operations, and supply chain whileestablishinggovernance frameworks. It ensures measurable environmental impact reductions, compliance with FDA/ISO standards, and trusted performance metrics aligned with business strategy.

Job Responsibilities and Essential Duties

• 
  
• 
  

  Drive carbon reduction roadmap and eco-design principles.

  
  
  

• 
  
• 
  

  Lead lifecycle assessments and integrate sustainability into product development.

  
  
  

• 
  
• 
  

  Collaborate with suppliers on low-carbon initiatives.

  
  
  

• 
  
• 
  

  Support compliance with ISO 14001, ISO 14040, and FDA standards.

  
  
  

• 
  
• 
  

  Ensure raw material complianceto include RoHS, REACH, EU MDR Prop65

  
  
  

• 
  
• 
  

  Define and standardizegovernance & KPI'sacross teams.

  
  
  

• 
  
• 
  

  Ensure data integrity and consistent reporting.

  
  
  

• 
  
• 
  

  Build dashboards to track sustainability and performance KPIs.

  
  
  

• 
  
• 
  

  Review and updategovernanceto align with evolving strategies.

  
  
  

MinimumRequirements

• 
  
• 
  

  Degree in Engineering, Sustainability,Project Management,or Data&Analytics.

  
  
  

• 
  
• 
  

  7+years in sustainability, governance, or regulated environments.

  
  
  

• 
  
• 
  

  Knowledge of lifecycle assessment, ISO frameworks, and BI tools (Power BI, Tableau).

  
  
  

• 
  
• 
  

  Strong communication, stakeholder management, and analytical skills.

  
  
  

• 
  
• 
  

  PMP Certification a plus.

  
  
  

Salary range: $98,000.00 - $125,000.00 plus bonus targeted at 10% (depending on overall company performance)

#LI-LG1

About us

With a firm belief that every person and community should have access to the best possible care, Getinge provides hospitals and life science institutions with products and solutions aiming to improve clinical results and optimize workflows. The offering includes products and solutions for intensive care, cardiovascular procedures, operating rooms, sterile reprocessing and life science. Getinge employs over 12,000 people worldwide and the products are sold in more than 135 countries.

Benefits at Getinge:

At Getinge, we offer a comprehensive benefits package, which includes:

• 
  
• Health, Dental, and Vision insurance benefits
  
• 401k plan with company match
  
• Paid Time Off
  
• Wellness initiative & Health Assistance Resources
  
• Life Insurance
  
• Short and Long Term Disability Benefits
  
• Health and Dependent Care Flexible Spending Accounts
  
• Commuter Benefits
  
• Parental and Caregiver Leave
  
• Tuition Reimbursement
  

Getinge is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, genetic information, national origin, disability, protected veteran status or any other characteristic protected by law.Reasonable accommodations are available upon request for candidates taking part in all aspects of the selection process.

Job Title: React Native Engineer

Location: Newark, NJ (Hybrid)

Duration: 6+ Months

• 
  
• Work collaboratively with Brand, Design/Creative, Product, Accessibility, User Research, Analytics and Technology SMEs.
  
• Create and maintain mobile branding, themes, components, modules, patterns and templates as reusable libraries, test automations and documentation.
  
• Adhere to clients Brand, Design, Engineering and Accessibility guidelines and standards.
  
• Provide leadership on implementing and improving mobile platform coding standards, tools and workflow.
  
• Prioritize and orchestrate the work of others.
  
• Consult closely with Product teams who develop full mobile native applications.
  

What You'll Need:

• 
  
• Must have experience in an agency environment or regulated industry (financial services preferred).
  
• Must possess at least 5 years of iOS and Android development experience. Use of React Native is mandatory; occasional lower-level Swift/Gradle interoperability is a plus.
  
• Must have experience coding, publishing and maintaining mobile libraries over several major versions.
  
• Have solid experience coding and supporting automated tests against UI libraries (Vitest/Jest preferred) and high-value journey flows (Appium or equivalent).
  
• Must have experience crafting accessible experiences including interactions with assistive technologies.
  
• Must have experience with Figma, possess strong design-thinking and be comfortable working in a design-led product development environment.
  
• Additional pluses include the use of Storybook, Figma Code Connect, BrowserStack/Saucelabs for visual and automated QA, mainstream AI agents, and Github Actions (or equivalent).
  
• Have experience mentoring junior associates and facilitating a "we win together" ethos.
  

With a passion for life

Join our diverse teams of passionate people and a career that allows you to develop both personally and professionally. At Getinge we exist to make life-saving technology accessible for more people. To make a true difference for our customers - and to save more lives, we need team players, forward thinkers, and game changers.

Are you looking for an inspiring career? You just found it.

Job Overview

Effectively design, develop, and document medical devices and medical equipment that satisfy internal and external customer needs and business objectives.

Job Responsibilities and Essential Duties

* Interprets customer specifications to define requirements for mechanical designs.

* Performs first principal analysis related to appropriate aspects of mechanical design.

* Provide support to peers, Jr Engineers, and Co-Ops.

* Applies the 3D CAD system to create mechanical design and drawings.

* Develops detailed fabrication and assembly drawings and performs tolerance analysis.

* Develop prototypes for design evaluation.

* Troubleshoot and resolve design & processing issues.

* Contributes to details of design documentation using electronic documentation systems.

* Collects, analyzes, and interprets data to propose recommendations.

* Develops & execute design verification protocols and technical reports.

* Work with internal and external resources on fabrication, inspection, and testing of new product parts and assemblies.

* Develop & debug prototype tooling / equipment and processes.

* Develop test methods and fixtures.

* Formulate plans & methods to accomplish assignments with appropriate oversight.

* Works independently and prioritizes assigned tasks with guidance.

* Contribute to project planning activities.

* Train technicians and operators on new process techniques.

Minimum Requirements

* BS in engineering discipline, mechanical preferred.

* Minimum 2-4 years related experience, or an MS and less than one year experience.

* Experience with a solid modeling CAD program, preferably SolidWorks and/or ProE.

* Experience in medical equipment / device design with experience in electromechanical, electro- pneumatic, and/or blood pumping equipment development.

* Knowledge in medical device industry regulations and practices - ISO 13485, ISO 7198 & GMP.

* Proficiency with Microsoft Windows, MS Office applications, and Adobe Acrobat.

* Experience with Microsoft Visio and Microsoft Project preferred.

Required Knowledge, Skills, and Abilities

* Design for Manufacturability and Assembly, DFM&A (cost/tooling/process considerations), preferably using SolidWorks CAD software.

* Understanding in design and development of injection molded plastic, plastic extrusion, casting, sheet metal, metal stampings, additive manufacturing processes, and machined metal components, and assemblies with high part counts highly desirable.

* Knowledge of mechanical design and development using metric ANSI/ISO dimensioning and drafting standards highly desirable.

* Understanding of GD&T, mechanical measurement and testing equip., and statistical analysis of test data.

* Experience with electronic document control systems in medical device and/or medical equipment design and development.

* Highly skilled at analytical reasoning, mechanism design, creative problem solving, and mathematical analysis.

* Ability to create and meet scheduled timelines (manage and coordinate tasks as required).

* Ability to work in a team environment.

* Strong communication skills.

* Competent in use of Microsoft Office tools.

* Ability to operate test equipment such as various pressure and flow measurement equipment, temperature/humidity chambers, PC-based data recorders, simulators, DVM's and oscilloscopes.

* Familiarity and the ability to operate basic shop equipment such as hand tools, a drill and Dremel.

* Understand and interpret simple wiring diagrams.

* Familiarity with Agile Scrum and waterfall project planning methods

This is a "Defined Term" assignment that will last approximately 6 months or until project is complete. Defined Term employees are eligible for most benefits (including health insurance and paid time off) while on assignment.

#LI-AS1

About us

With a firm belief that every person and community should have access to the best possible care, Getinge provides hospitals and life science institutions with products and solutions aiming to improve clinical results and optimize workflows. The offering includes products and solutions for intensive care, cardiovascular procedures, operating rooms, sterile reprocessing and life science. Getinge employs over 12,000 people worldwide and the products are sold in more than 135 countries.

Benefits at Getinge:

At Getinge, we offer a comprehensive benefits package, which includes:

• 
  
• Health, Dental, and Vision insurance benefits
  
• 401k plan with company match
  
• Paid Time Off
  
• Wellness initiative & Health Assistance Resources
  
• Life Insurance
  
• Short and Long Term Disability Benefits
  
• Health and Dependent Care Flexible Spending Accounts
  
• Commuter Benefits
  

Getinge is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, genetic information, national origin, disability, protected veteran status or any other characteristic protected by law.Reasonable accommodations are available upon request for candidates taking part in all aspects of the selection process.

Why You'll Love Working at Avantor

At Avantor, you're not just joining a finance team-you're stepping into a missiondriven organization where your insights and leadership truly matter. As a Sr. Accountant, you will:

Make a Visible Impact

Your work directly influences financial accuracy, operational excellence, and strategic business decisions across a global enterprise.

Grow Your Career with Intention

Elevate your technical accounting skills, deepen your SOX expertise, or expand into leadership-Avantor supports professional growth at every stage.

Lead Through Influence

Collaborate closely with Engineering, FP&A, and crossfunctional partners. Your coaching, mentorship, and process ownership will improve team performance and strengthen our financial operations.

Thrive in an Inclusive, Collaborative Culture

We value cultural confidence and competence. You'll work with diverse teams that welcome diverse perspectives and promote a sense of belonging.

Leverage Modern Tools & Systems

Your SAP and ERP experience will be put to strategic use as you participate in process enhancements, system optimization, and internal control strengthening.

Drive Process Improvements

Bring your ideas, identify gaps, and implement workflows that elevate operational efficiency and accuracy.

Competitive Salary & Stability

This role offers a competitive salary up to $110,000 and the stability of a global, established, and growthoriented organization.

Built for EST Candidates

Ideal for candidates located in NY, NJ, or PA, where collaboration aligns seamlessly with business needs and time zone requirements.

What We're Looking For

To attract the most qualified talent, we emphasize these key criteria:

Required Competencies

• Willing to work in the Eastern Time Zone (preferably based in NY, NJ, PA)

• Culturally confident and culturally competent communicator

• Strong SAP and ERP system experience

• Experience in team leadership, coaching, and mentoring

• Proven process implementation and continuous improvement mindset

• High accountability and ownership of work quality

• SOX control experience

• Fixed asset accounting expertise

• Salary requirement: up to $110,000 maximum

Role Overview

Under general supervision, the Sr. Accountant will collaborate with partners across the organization to:

• Provide detailed reports, including profit/loss projections

• Present financial reports and insights to internal leaders

• Analyze financial data and propose solutions to accounting issues

• Investigate and provide feedback on irregularities

• Support monthend, quarterend, and yearend closing processes

• Ensure SOX compliance and support remediation efforts

• Assist internal and external audit processes

• Manage fixed asset accounting including acquisition, classification, depreciation, and disposal

• Partner with Engineering on capital project accounting (budgets, AUC tracking, requests, capitalization)

• Prepare journal entries, reconciliations, roll forwards, and variance analysis

• Conduct balance sheet reconciliations and validate subsystem accuracy

• Support tax filings (sales/use tax)

• Participate in process improvement initiatives to enhance accuracy & efficiency

• Validate accuracy of work product and uphold quality standards

Who You Are

You demonstrate a balance of technical depth, operational awareness, and the ability to collaborate across diverse teams. You also bring:

• Bachelor's degree in accounting or related field

• 3-6+ years of relevant experience

• Strong ERP experience (SAP preferred)

• Intermediate-Advanced Excel skills (VLOOKUPs, pivot tables)

• Solid GAAP knowledge and internal controls understanding

• Strong organizational skills and exceptional followup

• Proactive problemsolver with continuous improvement orientation

• Ability to multitask and prioritize effectively

• High degree of discretion, professionalism, and critical thinking

Disclaimer:

The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of employees assigned to this position. Avantor is proud to be an equal opportunity employer.

Why Avantor?

Dare to go further in your career. Join our global team of 14,000+ associates whose passion for discovery and determination to overcome challenges relentlessly advances life-changing science.

The work we do changes people's lives for the better. It brings new patient treatments and therapies to market, giving a cancer survivor the chance to walk his daughter down the aisle. It enables medical devices that help a little boy hear his mom's voice for the first time. Outcomes such as these create unlimited opportunities for you to contribute your talents, learn new skills and grow your career at Avantor.

We are committed to helping you on this journey through our diverse, equitable and inclusive culture which includes learning experiences to support your career growth and success. At Avantor, dare to go further and see how the impact of your contributions set science in motion to create a better world. Apply today!

Pay Transparency:

The expected pre-tax pay for this position is

Actual pay may differ depending on relevant factors such as prior experience and geographic location.

EEO Statement:

We are an Equal Employment/Affirmative Action employer and VEVRAA Federal Contractor. We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected Veteran status, or any other characteristic protected by federal, state/province, or local law.

If you need a reasonable accommodation for any part of the employment process, please contact us by email at let us know the nature of your request and your contact information. Requests for accommodation will be considered on a case-by-case basis. Please note that only inquiries concerning a request for reasonable accommodation will be responded to from this email address.

For more information about equal employment opportunity protections, please view the Know Your Rights poster.

3rd Party Non-Solicitation Policy:

By submitting candidates without having been formally assigned on and contracted for a specific job requisition by Avantor, or by failing to comply with the Avantor recruitment process, you forfeit any fee on the submitted candidates, regardless of your usual terms and conditions. Avantor works with a preferred supplier list and will take the initiative to engage with recruitment agencies based on its needs and will not be accepting any form of solicitation.

Avantor offers a comprehensive benefits package including medical, dental, and vision coverage, wellness programs, health savings and flexible spending accounts, a 401(k) plan with company match, and an employee stock purchase program. Employees also receive 11 paid holidays, accrue 18 PTO days annually, are eligible for volunteer time off and 6 weeks of 100% paid parental leave (except in states that offer paid family leave). These benefits may not apply to employees covered by a collective bargaining agreement or those subject to other eligibility rules.

• 
  
• Facilitate workshops, demos, onboarding sessions, and cross?domain engagements to drive Marketplace adoption.
  
• Serve as the primary technical presenter of the Marketplace for domain teams and stakeholders.
  
• Engage with domain owners to understand their data products, help refine their articulation, and showcase how they integrate into the Marketplace ecosystem.
  
• Configure and maintain demo environments for Marketplace capabilities, data products, and new features.
  
• Support light development, proof?of?concept configurations, and sample integrations to demonstrate platform capabilities.
  
• Translate technical Marketplace concepts into clear, business?friendly language for non?technical audiences.
  
• Collect structured feedback from domain teams, synthesize insights, and partner with product and engineering to influence the roadmap.
  
• Develop and refine training materials, demos, playbooks, and onboarding assets to support continuous adoption.
  
• Act as an advocate for domains, ensuring their data product needs and challenges are well represented in Marketplace planning.
  
• Support ongoing adoption initiatives, including community sessions, office hours, and cross?domain knowledge sharing.
  

• 
  
• 4-7+ years of experience in data engineering, platform engineering, solution engineering, technical consulting, or similar roles.
  
• Strong understanding of data products, data modeling concepts, data APIs, enterprise integrations and metadata?driven architectures.
  
• Ability to configure and demonstrate platform features, build light proofs?of?concept, and support technical onboarding.
  
• Excellent communication and presentation skills, with experience translating technical concepts for business partners.
  
• Experience facilitating workshops, leading demos, or driving customer/product adoption initiatives.
  
• Ability to engage domain teams, understand their data product needs, and help articulate value within a larger ecosystem.
  
• Strong collaboration and stakeholder management skills across engineering, product, and business teams.
  
• Comfortable working in fast?moving environments and driving clarity through ambiguity.
  

• 
  
• Experience with data product and governance frameworks, data marketplaces, data mesh concepts, or platform adoption roles.
  
• Hands?on experience with cloud data platforms (Azure, AWS, or GCP), data pipelines, or integration tooling.
  
• Familiarity with REST/GraphQL APIs, event-driven patterns, and data ingestion workflows.
  
• Background in solution architecture, customer engineering, or sales engineering.
  
• Experience developing demo environments, sample apps, or repeatable platform enablement assets.
  
• Strong storytelling ability when explaining data product value, domain capabilities, and Marketplace patterns.
  

School Bus & Fleet Mechanic (Class A/B/C) Belair Services – Orange, NJ Salary: Up to $100,000 per year (based on experience) Sign-On Bonus: $1,000 Belair Services is currently hiring experienced School Bus and Fleet Mechanics in Orange, New Jersey .

We are seeking a Class A, B, or C Mechanic with strong experience in light and medium-duty fleet vehicles , diesel and gasoline systems, and preventive maintenance.

This role is ideal for technicians with fleet maintenance, school bus repair, diagnostic troubleshooting, and electrical system experience .

ASE certification is recommended.

MUST HAVE 3 years of experience as a Light or Medium Duty Fleet Mechanic Compensation & Benefits Earn up to $100,000 per year (dependent on experience and expertise) $1,000 sign-on bonus Medical benefits available 401(k) retirement plan participation $500 employee referral bonus Paid vacation Paid sick leave Paid time off (PTO) Growth and advancement opportunities Clean and safe work environment Company-paid certification training and classes Supportive and energetic team atmosphere Job Summary The Fleet Mechanic / School Bus Mechanic is responsible for preventive maintenance, diagnostics, and repairs on light and medium-duty fleet vehicles and school buses .

The technician will troubleshoot mechanical and drivability issues, perform inspections, and assist other technicians when necessary.

This role requires strong mechanical skills, knowledge of diesel and gasoline engines , and familiarity with DOT inspection procedures for school buses (preferred).

Key Responsibilities Vehicle Diagnostics & Repairs Diagnose mechanical malfunctions and perform vehicle repairs on fleet vehicles and school buses.

Inspect, test, adjust, and repair systems including: Steering systems Electrical systems Cooling systems Lubrication systems Brake systems Drivetrains Suspensions Power steering units Clutches Transmissions Engine components Temperature and fuel regulation systems Perform engine adjustments, testing, and rebuilds when required.

Preventive Maintenance Perform preventive maintenance inspections (PMIs) on fleet vehicles.

Ensure vehicles meet federal, state, and local safety regulations .

Assist with DOT inspection procedures for school buses.

Repair Oversight & Documentation Obtain proper approval for major repairs before releasing vehicles.

Record time spent, parts used, and services performed.

Identify additional maintenance needs and escalate repairs when necessary.

Fleet Support Perform road calls and roadside repairs when required.

Assist and guide other technicians on complex repairs.

Maintain a clean, organized, and safe work area .

Team & Work Ethic Work independently with minimal supervision.

Demonstrate strong troubleshooting and decision-making skills.

Continuously develop mechanical knowledge and technical skills.

Minimum Requirements 3 years of experience as a Light or Medium Duty Fleet Mechanic Experience working on fleet trucks, buses, or commercial vehicles Must qualify as a Class A, B, or C Mechanic Strong diagnostic, electrical, and A/C repair skills Technical knowledge of diesel engines and gasoline systems Ability to perform preventive maintenance and complex repairs Must possess basic hand tools required for the job Valid state driver’s license ( CDL preferred ) Ability to perform road service and emergency repairs Ability to work flexible schedules when required Must be 21 years of age or older Preferred Qualifications ASE Certification School bus maintenance experience Familiarity with DOT inspection standards Advanced diagnostics and electrical troubleshooting Experience with internal engine and transmission repairs Work Environment Clean and safe maintenance facility Collaborative team environment Ongoing training and certification support Opportunities for long-term career growth ​

Position: Senior Semantic Engineer / Ontology Engineer

Location: East Hanover, NJ (Hybrid - 3x/week onsite)

Duration: 6 Months (extendable)

DESCRIPTION:

We are hiring a Senior Semantic Engineer / Ontology Engineer to lead the design of healthcare-grade ontologies and semantic layers that power trusted analytics, interoperable data products, and AI-ready knowledge systems. You will apply metrics-first semantic modeling and ontology engineering practices aligned to the principles such as clear semantics, reusable meaning, governance-by-design, and measurable business outcomes. You’ll work across RDF and property graph paradigms and Snowflake semantic layer.

Key Responsibilities:

• Design and evolve healthcare ontologies and semantic models to standardize meaning across domains (clinical, patient, provider, claims, access, quality, outcomes).

• Design data products that are AI-ready and leverage ontologies and semantic models

Build metrics-first semantic layers:

• Define canonical metric definitions, dimensions, hierarchies, and calculation rules.

• Ensure metrics are explainable, auditable, and consistently implemented across products and teams.

• Model knowledge in both RDF (RDFS/OWL) for formal semantics and interoperability.

• Property graphs for traversal-heavy use cases and relationship analytics.

Develop and maintain semantic artifacts:

• Concept schemes, entity models, vocabularies, mappings, and documentation.

• Alignment patterns between ontologies, data products, and downstream analytics/AI use cases.

Implement semantic integration patterns:

• Entity identity resolution, entity linking, terminology harmonization, and enrichment workflows.

Partner with platform teams to operationalize semantics in Snowflake:

• Enable semantic access patterns that support analytics and AI applications.

• Contribute to solutions that leverage Snowflake Cortex for semantic enrichment and assisted discovery (within established governance constraints).

Collaborate with governance and architecture stakeholders to embed:

• Versioning, stewardship workflows, quality checks, and change management for semantic assets.

• Guide best practices and mentor engineers/analysts on ontology engineering, graph modeling, and metrics-first design.

Required Qualifications

• 8+ years in semantic engineering, ontology engineering, knowledge graph development, or closely related roles.

• Demonstrated experience in healthcare data domains (payer/provider, clinical, claims, RWE, quality, outcomes, etc.).

• Strong hands-on ontology engineering experience: RDF, RDFS, OWL, SPARQL and/or graph query experience

• Ontology modularization, alignment, and lifecycle management

• Experience with property graph modeling (e.g., Neo4j-style patterns) and translating between RDF and property graph representations when needed.

• Proven delivery of a metrics-first approach:

• Canonical KPIs/metrics definitions, dimensional modeling alignment, semantic consistency across BI and data products.

• Experience working with modern cloud data platforms, especially Snowflake, and exposure to Snowflake Cortex for AI-enabled workflows.

• Strong stakeholder communication skills: able to translate clinical/business intent into precise semantic definitions and usable artifacts.

Preferred Qualifications

• Familiarity with healthcare interoperability and terminology standards (e.g., HL7/FHIR, SNOMED CT, LOINC, ICD-10) and how to map/align them to enterprise semantics.

• Experience with semantic tooling and practices, validation rules, ontology testing, and CI/CD for semantic assets.

• Experience deploying semantic context layers

About Chiral Photonics

Chiral Photonics is a fast-growing photonics manufacturing company enabling next-generation optical connectivity. We specialize in high-precision fiber-optic components and assemblies that support advanced data center, AI, and communications infrastructure. As we scale production, we are building strong operational foundations rooted in standard work, quality, and continuous improvement.

Role Overview

The Production Floor Manager owns the day-to-day execution of manufacturing operations on the production floor. This role is responsible for meeting daily and weekly production goals, ensuring adherence to SOPs and work instructions, maintaining a clean and organized floor, and supporting production teams through hands-on leadership, equipment troubleshooting, and close collaboration with Production Director, Operations, Engineering and R&D teams.

This is a highly visible role critical to scaling output while maintaining Chiral’s high standards for precision, quality, and safety.

Key Responsibilities

Production Execution & Performance

• Lead daily production floor operations, ensuring work is executed according to plan and priorities.
• Own achievement of daily and weekly output targets (e.g., standard orders, batch completion, on-time delivery).
• Track and manage key production metrics such as:
• Units completed per day/week
• WIP levels by process step
• Throughput and cycle time
• Rework and defect trends
• Participate in and lead daily production huddles and weekly planning reviews.
• Ensure every technician has a work order and all parts are ready in advance of their scheduled shift. 
• Work closely with Operations Planning Coordinator to review forecasted plans and targets. 

Team Management

• Directly manage and support a production team of approximately 10-15 technicians (scaling over time).
• Provide clear daily direction, prioritize work, and rebalance resources as needed to meet goals.
• Coach technicians on standard work, quality expectations, and safe operating practices.
• Support onboarding and training of new production staff in partnership with Operations
• Review timecards for accuracy and completeness 

Standard Work, Quality & Compliance

• Ensure strict adherence to SOPs, work instructions, and quality controls across all production activities.
• Enforce discipline around WIP management, including labeling, tracking, storage locations, and FIFO practices.
• Identify deviations from standard work and drive corrective actions.
• Maintain a clean, organized, and audit-ready production floor (5S mindset).

Equipment & Troubleshooting Support

• Act as first-line support for equipment issues and production interruptions.
• Troubleshoot common equipment and process issues alongside technicians.
• Escalate complex issues appropriately and coordinate with Process Engineering and Operations.
• Help minimize downtime and ensure fast recovery to standard operations.

Process Improvement & Cross-Functional Collaboration

• Partner closely with Process Engineering to identify bottlenecks, yield issues, and improvement opportunities.
• Contribute ideas and data to drive process optimization, efficiency gains, and defect reduction.
• Support pilot changes, new process introductions, and scaling initiatives on the production floor.
• Provide structured feedback from operators to operations to be triaged for action with process / engineering / R&D.

Safety & Housekeeping

• Promote and enforce a safe working environment at all times.
• Ensure compliance with safety procedures, PPE requirements, and cleanliness standards.
• Address safety or housekeeping issues immediately and proactively.

Qualifications

• 10+ years of experience supervising or leading manufacturing operations (precision manufacturing, photonics, optics, electronics, or similar preferred).
• Strong understanding of production workflows, SOP-driven environments, and WIP control.
• Hands-on leadership style with the ability to work directly on the floor.
• Experience supporting equipment troubleshooting and process adherence.
• Strong communication skills and comfort working cross-functionally with engineering and operations.

Preferred Experience

• Experience in fiber-optic, photonics, semiconductor, medical device, or other high-precision manufacturing environments.
• Familiarity with lean manufacturing, 5S, or continuous improvement methodologies.
• Experience scaling production from low-volume to higher-volume operations.

• Leading the Naval network warfare missions in developing tactics and procedures to realize tactical, strategic and business advantages afloat and ashore
• Driving interoperability with joint, allied and coalition partners
• Building professional excellence through education, training and certification and milestone qualifications
• Optimizing organizational effectiveness through cutting-edge technologies, knowledge management techniques and a culture of innovation
• Helping to develop and deploy information systems, command and control and space systems
• Serving as a key part of the Information Dominance Corps in its mission to gain a deep understanding of the inner workings of adversaries
• Overseeing the work of Information Systems Technicians - Enlisted Sailors (no degree required) who serve as specialists in information technology

• Serving as part of Battle Group staffs on ships at sea
• Working in C4I/Space/Surveillance on shore tours
• Serving on major Navy and joint staffs
• Serving in command of key communication and surveillance facilities around the globe

• Pursuing opportunities at institutions such as Naval Postgraduate School (NPS) or Navy War College (NWC)
• Completing Joint Professional Military Education (JPME) at one of the various service colleges

About Chiral Photonics

Chiral Photonics is a fast-growing photonics manufacturing company enabling next-generation optical connectivity. We specialize in high-precision fiber-optic components and assemblies that support advanced data center, AI, and communications infrastructure. As we scale production, we are building strong operational foundations rooted in standard work, quality, and continuous improvement.

Role Overview

The Operations Project Manager sits at the intersection of production planning and project/program management and plays a critical role in translating customer demand, business strategy, and operational capabilities into executable plans.

This role is responsible for:

• Production Forecasting and Capacity Planning (~40%) — Developing and maintaining production forecasts and capacity plans to ensure the organization has the right people, stations, and sequencing in place to meet customer demand.
• Portfolio Project Management (~40%) — Driving execution and alignment across a portfolio of operational, manufacturing, engineering, and business initiatives, ensuring priorities are clearly sequenced, resources are allocated appropriately, and projects progress according to plan.
• Additional Assignments (~20%) — Supporting the Operations and Production Directors with operational initiatives as needed. This may include, but is not limited to, reviewing and updating standard operating procedures (SOPs) across the product lifecycle, supporting process improvement efforts, and assisting with operational coordination.



This is a highly cross-functional role that partners closely with Production, Process Engineering, R&D, Sales, and Leadership. The ideal candidate is structured, analytical, and detail-oriented, and is comfortable bringing clarity, organization, and strong follow-through to complex operational challenges.

Key Responsibilities

1. Production Forecasting & Planning (~40%)

• Own and maintain production forecasts across standard, custom, and R&D orders.
• Translate demand into capacity and resource plans, including labor, stations/equipment, and shift planning.
• Maintain resource models by station, value stream, and operator.
• Partner with Production, Process and Engineering to assign work, identify bottlenecks, and mitigate risks.
• Track forecast vs. actual performance and improve planning accuracy.
• Support planning in a high-mix, high-volume manufacturing environment with both production and R&D workstreams.
• Support scale decisions, including staffing, cross-training, additional stations, and automation opportunities.

2. Project & Portfolio Management (~40%)

• Manage a portfolio of cross-functional initiatives across manufacturing scale, process improvement, engineering enablement, and operational systems.
• Develop and maintain project plans, timelines, and dependencies.
• Drive execution by tracking actions, ensuring follow-through, and escalating risks.
• Help leadership sequence priorities and align resources across operational initiatives.
• Prepare status updates, dashboards, and decision materials.

3. Additional Assignments (~20%)

Support Operations and Production leadership with initiatives that improve execution, standardization, and cross-functional coordination, including:

• Maintaining and improving SOPs and work instructions across the product lifecycle.
• Supporting process improvement initiatives to improve throughput and reduce cycle time.
• Assisting with operational reporting, dashboards, and data analysis.
• Contributing to special projects and operational initiatives as needed.

Required Qualifications

• 7+ years of experience in manufacturing operations planning and program/project management, or manufacturing operations (startup or scale‑up experience strongly preferred)
• Strong analytical skills with hands‑on experience in:
• Forecasting and capacity planning
• Resource modeling and scenario analysis
• Proven ability to manage multiple concurrent projects with competing priorities
• Excellent organizational skills and attention to detail
• Strong written and verbal communication skills
• Comfortable working in a fast‑paced, evolving environment
• Ability to manage stakeholders at various levels.

Preferred Experience

• Experience in manufacturing, hardware, photonics, semiconductors, or advanced technology environments
• Familiarity with:
• High‑volume / high mix production
• R&D and custom order workflows
• Lean, continuous improvement, or operational excellence frameworks
• Advanced proficiency in Excel / Google Sheets; experience with planning or PM tools is a plus
  

The Integration Architect defines, designs, and governs enterprise integration architecture standards across AWS, Azure, Microsoft Fabric, and on-prem systems. This consultant creates scalable integration blueprints, reusable patterns, and secure connectivity frameworks that ensure interoperability, reliability, and domain-aligned data exchange. The role partners closely with domain teams, platform engineering, API management teams, and enterprise architecture to accelerate delivery while maintaining architectural integrity.

• 
  
• Define and maintain enterprise standards for API design, event schemas, messaging patterns, and integration of contracts.
  
• Establish integration governance across AWS, Azure, MS Fabric, and on-prem systems.
  
• Define patterns for ADS (Authorized Data Sources) alignment, data contracts, schema evolution, and anchor key management.
  
• Enforce adherence to enterprise security principles, including OAuth2/OIDC, JWT, TLS, Zero Trust patterns.
  

• 
  
• Build and maintain unified enterprise integration architecture blueprints spanning cloud, Fabric, and on prem connectivity.
  
• Create domain specific and cross domain integration flow maps, canonical API patterns, and event driven reference architectures.
  
• Align AWS, Azure, MS Fabric, and on-prem patterns under Unified Architecture.
  

• 
  
• Develop reusable integration patterns for:
  
  
  • 
    
  • AWS: API Gateway, Event Bridge, SNS/SQS, Lambda, Step Functions, Glue, EMR, Redshift, Lake Formation, Kinesis, AWS Batch, AWS ECR, AWS ECS Fargate.
    
  • Azure: APIM, Functions, Service Bus, Azure Data Factory (all IR types), Azure Synapse Pipelines, Azure Stream Analytics, Azure Batch, Azure Data Explorer ingestion.
    
  • MS Fabric: Data Factory pipelines, Lakehouse ingestion interfaces, Fabric Data Pipelines, Notebook-based ETL, Warehouse ingestion.
    
  • On prem: MFT, MQ, legacy services.
    
  
  
  
• Provide templates for API contracts, event schemas, integration error handling, observability hooks, and resiliency patterns.
  

• 
  
• Define integration patterns incorporating ADS rules, domain ownership, and anchor key management for interoperability.
  
• Ensure all integration patterns embed security, observability, lineage awareness, and operational resiliency.
  
• Collaborate with data governance to ensure consistent entity resolution and cross?domain identifier mapping.
  

• 
  
• Guide domain teams in implementing target state integration architectures.
  
• Lead or participate in architecture reviews for API designs, event models, platform integrations, and connectivity.
  
• Recommend modernization opportunities to retire from legacy integration mechanisms and adopt event-driven/API?first models.
  

• 
  
• 8-12+ years in integration architecture, API engineering, event-driven design, or hybrid integration.
  
• Strong hands-on expertise across:
  
  • 
    
  • AWS: API Gateway, Event Bridge, SNS/SQS, Lambda, Step Functions, Glue, EMR, Redshift, Lake Formation, Kinesis, AWS Batch, AWS ECR, AWS ECS Fargate.
    
  • Azure: APIM, Functions, Service Bus, Azure Data Factory (all IR types), Azure Synapse Pipelines, Azure Stream Analytics, Azure Batch, Azure Data Explorer ingestion.
    
  • MS Fabric: Data Factory pipelines, Lakehouse ingestion interfaces, Fabric Data Pipelines, Notebook-based ETL, Warehouse ingestion.
    
  • RDBMS: SQL, Oracle, DB2, RDS, etc.
    
  • On prem: MQ, MFT, REST/SOAP services.
    
  
  
  
• Understanding of ADS, anchor key management, data/domain contracts, lineage aware integration.
  
• Experience designing event driven, API first, batch, and hybrid integration architectures.
  

• Pursuing opportunities at institutions such as Naval Postgraduate School (NPS) or Navy War College (NWC)
• Completing Joint Professional Military Education (JPME) at one of the various service colleges