Engineering Journal Impact Factor Jobs in Walnut

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do.

L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.

Job Title: Scientist, Electrical Engineer

Job Number: 34122

Job Location: Yorba Linda, California, On Site

Job Schedule: 4/10

Job Description:

L3Harris is looking for candidates for the Scientist in Hardware and RF Electrical Engineering in our Navigation Solutions (NS) business in Yorba Linda, CA (IEC). The candidate will be responsible for and provide senior hands-on expert level in hardware and RF Electrical engineering on multiple programs. The candidate must have deep Engineering and broad Engineering technical expertise, industry recognition in defense and commercial applications, and experience in military GPS and Position Navigation and Timing (PNT) technology or other RF hardware designs and hands-on. Our Navigation Solutions products provide advanced military GPS and Position, Navigation, Timing (PNT) capabilities in military embedded real-time systems that can be used in weapons, ground, airborne, maritime, and space environments.

Essential Functions:

• Must provide overall hands-on technical expertise in Hardware and RF Electrical Engineering for NS programs.
• Expert hands-on knowledge of Electrical Engineering low frequency and high frequency (RF) analog and CCA design.
• Requires comprehensive level knowledge of Electrical Engineering low frequency and high frequency (RF) Analog and Digital circuit design. Experience with RF systems, ideally GPS receivers
• Able to contribute to providing innovative Electrical Engineering solutions consistent with business development plans.
• Ability to develop circuit designs, requirements, design descriptions, verification plans/procedures, customer CDRLs to meet program schedules.
• Ability to support cross functional teams for cross functional conflict resolution, Root Cause Analysis, blank page architecture developments and design
• Ability to contribute to algorithm development, analysis, implementation, system architecture, verification, and Test with emphasis on military GPS electronics.
• Ability to contribute to execution of design, build, integration and test activities, problem resolution and verifying that the deliverable products meet all program and customer requirements.
• Ability to provide project management reports as required, support senior level and customer reviews as necessary.
• Ability to provide inputs and reviews of the engineering technical baseline as part of proposal efforts.
• Ability to interface with the program's leadership and other teams (SW, Systems, ME, and Test) on a frequent basis, conduct or participate in customer and/or program technical review presentations, and provide progress status updates on work products.
• Ability to participate or lead in the product development process including design reviews.
• 5 to 10% Travel required.
• Must have Secret Security Clearance or be able to obtain a US security clearance.

Qualifications:

• Bachelor's degree in electrical engineering and a minimum of 12 years of prior relevant experience.
• Graduate Degree and a minimum of 10 years of prior related experience.
• In lieu of a degree, minimum of 16 years of prior related experience.
• Minimum of 7 years' experience in ability to capture schematics design and PCBA Layout using modern EE CAD such as Altium or Mentor Graphics.
• 5 years' experience with project management and product design team leadership guided by individual annual goals and objectives with minimal oversight or direction; working in a team environment as an individual contributor.
• 8 years' strong experience with receiver, Antenna, or Radio design (i.e. RF).
• 4 years' experience with embedded Hardware design.
• 4 years' experience demonstrating strong verbal and written skills
• 7 Years experience with design tools such as MATLAB/Simulink, P-Spice, Agilent ADS (or AWR), Schematics Capturing/PCBA Layout tools such as Altium, Mentor Graphics, and Ansys HFSS

• Must have Secret Security Clearance or be able to obtain a US security clearance.

Preferred Additional Skills:

• Recognized as an Analog RF Electrical and Radio Receivers in industry.
• Experience and understanding in detailed RF receiver designs in military GPS, MGNSS, and other PNT technology.
• Strong familiarity with modern GPS Module design and topology.
• Advanced with High-speed Analog design methodologies.
• Experience with HAM radio is a plus.
• Advanced in MS Office, design tools such as Simulink/MATLAB, P-Spice, Altium (Schematics Capturing & PCBA Layout), Agilent ADS (or AWR), and Ansys HFSS.
• Proficient with DO-254 design.

In compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is Min $153,000.00 - $284,000.00 Max. The salary range for this role in Colorado state, Hawaii, Illinois, Maryland, Minnesota, New York state, Cleveland Ohio, and Vermont is $133,000.00 Min - $247,000.00 Max. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements.

#LI-KM1

L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.

Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.

By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.

L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.

Kosmos Group is an engineering consulting firm, specializing in electrical power generation, transmission, substation, and distribution. We support public and private utilities, consultants, and contractors across the U.S. and Canada, providing end-to-end engineering solutions, including conceptual design, feasibility study, detailed design, construction drawing package, field inspection, project closeout documentation, and more

At Kosmos Group, we foster an open, collaborative, and supportive culture. We believe our employees reach their full potential when they feel valued and empowered through innovation, teamwork, and growth. We deliver reliable solutions for the future and are a positive influence in our communities

Our Transmission Engineering team is looking for a Transmission Line Engineer to support our growing Transmission & Distribution practice in our Diamond Bar office. This is a hybrid position, working 3 days in the office and 2 days from home office. The successful candidate will be involved in all facets of transmission line routing and design. Specific areas of responsibility are provided below.

Job Description

• Routing and design a variety of transmission line projects with project scopes varying from new to rebuilt facilities utilizing Power Line Systems software
• Responsible for technical content and deliverables while working with multi-discipline teams under the guidance of the assigned Project Engineer or Manager
• Sag tension calculation for transmission tower loading
• Structure design and analysis and preparing loading trees
• Assist in the development of design criteria and specifications for transmission line design and procurement of materials
• Perform peer quality checks
• Should be familiar with Transmission industry codes and standards
• Assist Engineer of Record in preparing construction documents including plan and profile drawings, structure loading trees, and foundation and assembly drawings
• Assist Engineer of Record with complex projects and be the lead engineer for smaller projects
• Provide construction support for high voltage transmission line projects
• Participate and progress the company culture of knowledge sharing and continuous improvement
• Act as a liaison between Kosmos Group engineering and construction teams by conducting field site visits
• Apply engineering principals and technical experience address project issues and recommend solutions
• Additional duties as assigned

Required Qualifications

• Bachelor’s degree in engineering from an ABET-accredited college
• An Engineering-in-Training (EIT) certificate
• Minimum 2 years of transmission line design experience
• Experience in Power Line System-based programs (i.e., PLS Suite of software including PLS-CADD, PLS-POLE, etc.)
• Strong attention to detail, team collaboration, organization, and problem-solving skills
• Ability to work methodically and analytically in a quantitative problem-solving environment
• Excellent written and verbal communication skills
• Ability to travel domestically and internationally as needed for project support

Preferred Qualifications

• Prior engineering consulting experience

For California only: this position's base salary range approximation is $100,000.00 - $148,000.00 and it depends on numerous factors such as applicable experience, skills, knowledge, credentials, geographical location, etc.

We’re seeking passionate individuals who bring fresh perspectives and innovative ideas. This is an exciting time to join our team as we gear up to grow and tackle future challenges. We prioritize safety, foster collaboration, act with integrity, respect all perspectives, and embrace forward-thinking. Are you ready to be a part of the journey?

Kosmos Group is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do.

L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.

Job Title: Specialist, Electrical Engineer

Job Number: 34255

Job Location: Yorba Linda, California, On Site

Job Schedule: 4/10

Clearance: Must Have the Ability to Obtain and Maintain a Department of War Security Clearance

Job Description:

L3Harris is seeking a Electrical Engineer with knowledge of job area in Analog, Digital, or RF engineering. Participate in complex projects or processes with general oversight. Communicates within and outside of own function to gain cooperation on operational processes, practices, and procedures. Makes moderate to substantial improvements to systems and processes. Contributes to achievement of departmental goals and operating plans with direct impact on the departmental results.

Essential Functions:

• Responsible for designing, developing, modifying, testing, evaluating and integrating electronic equipment, electronic parts, components, or integrated circuitry for complex, high performance hardware systems.
• Determines design approaches and parameters.
• Analyzes electrical requirements to determine feasibility of design within time and cost constraints.
• Analyzes equipment to establish operating data, conducts experimental tests and evaluates results.
• Selects components and equipment based on analysis of specifications and reliability.
• Able to identify component operational characteristics that may impact system performance and or sustainability.

• Supports and/or leads various design activities for new/existing products, predominantly involving medium frequencies/edge rates. Design for manufacturing is considered through all phases of the development process.

• Applies moderately complex electrical engineering principles and techniques to support/lead design, development, documentation, verification, and manufacturing debug activities.
• Supports and/or leads design modifications for existing products frequently driven by component obsolescence situations. The design modification is usually of moderate complexity and may require major card level redesign to absorb the necessary hardware changes.
• Provides technical solutions to a wide range of difficult problems. Contributes to completion of milestones associated with specific projects that have significant effect on the success of a sub-process/small project task.
• Ability to understand and generate schematics with digital and analog electronic circuits.
• Ability to provide guidance for PCB layout.

• May also review vendor capability to support development. Includes the application of specialized skill sets including analog, digital, FPGA, DSP, CCA, power, antenna, and control systems knowledge as required.
• May develop, design, and assess the methodologies and performance of specialized algorithms for, Underwater Acoustics, sonar, communications, geophysical, and other sensor processing applications.
• Generation of Presentation materials and training
• Operation's Manual development and release
• Test Procedure development and release

• 5 to 10% Travel required.
• Must have Secret Security Clearance or be able to obtain a US security clearance.

Qualifications:

• Bachelor's Degree and minimum 4 years of prior relevant experience. Graduate Degree and a minimum of 2 years of prior related experience. In lieu of a degree, minimum of 8 years of prior related experience.
• Minimum 3 years of experience in Analog Circuit Design.
• Minimum 3 years of RF Electronics.
• Minimum 2 years of Schematics Capturing & PCBA Layout in either Altium or Cadence.
• Minimum 3 years Lab experience in trouble shooting electronics in Analog and RF domain.
• Minimum 2 years of experience working with Network Analyzer, Frequency Generator, Vector Analyzer, and digital/analog scope.

• Must have Secret Security Clearance or be able to obtain a US security clearance.

Preferred Additional Skills:

• Familiarity with GPS Electronics / Circuit Design.
• A/D and D/A Circuit Design, Interfacing and use experience
• Familiarity with industry standard EDA tools including schematic capture, PCB layout and FPGA development/simulation.
• Experience in development of military products, a plus.

In compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is Min $92,500.00 - $171,500.00 Max. The salary range for this role in Colorado state, Hawaii, Illinois, Maryland, Minnesota, New York state, Cleveland Ohio, and Vermont is $80,500.00 Min - $149,500.00 Max. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements.

#LI-KM1

L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.

Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.

By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.

L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.

Company Introduction

As T&T celebrates over 30 years as Canada’s favorite Asian grocery destination, the company is also expanding into the United States. In 2024, T&T opened its first U.S. flagship store in Bellevue, Washington, located at the Marketplace at Factoria. Spanning 76,000 square feet, it is the largest Asian specialty supermarket in Washington state.

To support its U.S. growth, T&T has established a regional office in the greater Los Angeles area to expand its vendor network and build partnerships with American food suppliers.

The Role

The Construction Project Manager plays a key role in overseeing new store construction and renovation projects in the U.S. Reporting to the Senior Director, Store Development or the Senior Construction Project Manager, this position leads a project team to ensure all projects are delivered efficiently, on budget, and in compliance with company standards, landlord requirements, and local regulations. The successful candidate will be a proactive leader who can manage multiple projects simultaneously, foster collaboration among internal and external stakeholders, and contribute to the company’s ongoing expansion goals.

The role will be stationed in Brea, CA, traveling is required.

Major Responsibilities

• Provide clear direction and daily scheduling to project team members to ensure effective performance.
• Deliver timely follow-up, feedback and performance evaluations to project team members.
• Establish and implement an efficient Construction Management System to monitor and manage all active projects.
• Develop and review comprehensive project plans and specifications, including scope, schedule, and resource requirements.
• Research and recommend materials, equipment, and tools that meet operational needs and standards.
• Supervise multiple project teams to ensure quality, compliance, and adherence to timelines and budgets, keeping stakeholders informed of progress.
• Collaborate closely with internal departments to support organizational needs and initiatives.
• Work with designers, engineers, general contractors, landlords, and local authorities to ensure successful project delivery.
• Execute and, when necessary, adapt strategies to ensure projects are completed on schedule and within budget.
• Travel frequently across the U.S. to oversee new store developments and renovation projects.
• Negotiate vendor contracts and agreements, prepare and monitor budgets, and ensure proper financial tracking throughout the project lifecycle.
• Manage vendor relationships and ensure all necessary building permits are obtained and properly closed upon project completion.
• Organize, collect, and provide all contracts, agreements, and invoices to Finance & Accounting and other internal departments as required.
• Develop long-term construction strategies to support the company’s rapid expansion in the U.S.
• Perform other duties as assigned by the direct supervisor.

You Should Have/Be:

• Bachelor’s degree or above in Construction Management, Engineering, or a related field.
• Minimum of 5 years’ experience in construction project management, preferably with retail brands or supermarket chains.
• Proven experience in design, architecture, construction, maintenance, and renovations.
• Ability to interpret blueprints and strong technical and mechanical understanding.
• Demonstrated supervisory, interpersonal, and leadership skills.
• Excellent organizational and time management abilities; able to perform effectively under pressure and tight deadlines.
• Strong written and verbal communications skills in English; knowledge in Mandarin or Cantonese is an asset.
• Proficiency in construction management software and Microsoft Office Suite.

Work Hours

• 5-day work week (Monday to Friday), 9:00am – 5:30pm

Benefits:

• 401(k) matching
• Dental insurance
• Employee discount
• Health insurance
• Life insurance
• Paid time off
• Vision insurance

LIMITATIONS & DISCLAIMER

This job description is intended to describe the general nature and level of work performed by individuals assigned to this position and is not an exhaustive list of all duties, responsibilities, or qualifications required. The Company reserves the right to modify, add, or remove duties and to assign other responsibilities as business needs change, in compliance with applicable federal, state, and local laws. The Company will provide reasonable accommodation in accordance with applicable law. Compensation and benefits are determined based on factors such as education, experience, skills, qualifications, internal equity, and business needs, and are administered in compliance with applicable pay transparency and wage disclosure laws. Nothing in this job description alters the at-will employment relationship, creates a contract of employment, or guarantees employment for any specific duration.

Position Summary: Plans, directs, and coordinates the work activities and resources necessary for manufacturing products in accordance with cost, quality, and quantity specification. Reviews processing schedules or production orders to make decisions concerning inventory requirements, staffing requirements, work procedures, or duty assignments, considering budgetary limitations and time constraints. Supervises the daily operation of a machine shop, repair/fabrication facility and electronic or mechanical assembly personnel in the repair and/or manufacturing of mechanical systems, fabrication of engineering models and assemblies, electronic or other hardware in accordance with engineering specifications, quality requirements, within cost/budget restraints and on schedule. Ensures continuous efficient production in desired quantity and quality. Assures that there are adequate materials, supplies, tools, and equipment. Monitors work in process to ensure efficient flow. Assist in determining manpower and skills needed so those schedules are maintained. Reviews operations and confers with technical or administrative staff to resolve production or processing problems. Coordinates or recommends procedures for facility or equipment maintenance or modification, including the replacement of machines.

Essential Duties and Responsibilities include, but are not limited to:

• Maintain departmental day-to-day production activities, monitor and prioritize workflow and schedules.
• Supervise production staff and give technical direction.
• Assist in hiring, training and reviewing performance of staff.
• Ensure product is in compliance with customer standards and ensure fulfillment goals.
• Ensure the safe use of equipment and schedule regular maintenance.
• Check production output according to specifications.
• Submit reports on performance and progress.
• Coordinates and monitors manufacturing projects from initiation through delivery.
• Identifies and allocates project resources.
• Ensures projects are completed on schedule and within budget.
• Resolves issues and contributes to the business unit/area development.
• Monitors and maintains department productivity and budgets.
• Ensure effective employee relations. Provide employee coaching and development. Makes employment decisions. Resolve employee issues through problem resolution.
• Balance quality, productivity, cost, safety and morale to achieve positive results in all areas. Work to continuously improve in all areas.
• Other duties as assigned

Qualifications:

• Experience and Education:
• 5-7 years of relevant experience
• Bachelor’s degree or equivalent
• Technical Skills:
• Excellent attention to detail
• Knowledge in a variety of mechanic skills including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting and repair of production machines
• Knowledge of location and proper use of maintenance/facilities, tooling, supplies and equipment
• Able to read and interpret schematics and blue prints
• Comfortable operating heavy equipment and power tools
• Forklift certification
• Mastery of basic math (addition, subtraction, multiplication, division, and fractions)
• Problem solving abilities
• Ability to use calipers, micrometers, etc.
• Strong teamwork and communication skills to get along with co-workers and be a team player
• Understand and obey safety requirements
• Commitment to keep work area clean and free of debris
• Physical Requirements:
• Must be able to lift and/or move up to 50lbs or more
• Frequently required to handle; reach with hands and arms; stoop, kneel, bend, crouch or crawl
• Specific vision abilities include close and distance vision, depth perception and ability to adjust focus
• Ability to use hands to finger, handle, or feel, as well as reach with hands and arms for extended periods of time to handle or feel objects, tools, or controls.

Supervisory Responsibilities:

• Supervision is usually limited to a small function or a subset of a function (unit, section, etc.).
• The functional activities are not complex and the impact of decisions on business operations are minimal.
• Supervision is usually partial or part-time, typically restricted to assigning work and directing efforts or restricted to assigning and checking work and providing technical guidance.
• Little or no responsibility for employment decisions.

Travel Required: Occasional

Note: This job description in no way states or implies that these are the only duties to be performed by the employee(s) of this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities.

To perform this job successfully, the employee(s) will possess the skills, aptitude, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety to themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an at will relationship.

Affirmative Action/Employment Opportunity (EEO) Statement: ALIGN PRECISION is an equal opportunity employer and values diversity at our company. We are committed to creating a workplace where all qualified individuals are welcome and can thrive, regardless of race, religion, color, national origin, gender, sexual orientation, gender identity, age, marital status, veteran status, disability status, or any other characteristics protected by law.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do.

L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.

Job Title: Senior Manager, FP&A and Operational Finance

Job Number: 34273

Job Location: Yorba Linda, CA

Schedule: 4/10: Employees work 10 hour days, 4 days a week

L3Harris' Advanced Effects (AE), provides precision electronic components, subsystems, and systems for the DOD and international allies. L3Harris' AE specializes in the design and manufacture of fuses, ignition safety devices, proximity sensors, GPS navigation systems, aerospace status indicators, and range and test solutions.

The L3Harris Interstate Electronics Corporation business was founded in 1956 and for over 65 years IEC has played a key role in the most successful defense system of modern history. With sites in Yorba Linda, CA, Cape Canaveral, FL, and Crystal City, VA, IEC is a recognized industry leader in defense and security solutions, providing critical technology advancements in the areas of GPS/Position Navigation and Timing, and Range and Test Solutions. We offer competitive benefits, an alternative 4/10 work schedule, and the opportunity to work with a talented and diverse group of professionals.

Job Description:

The Senior Manager FP&A and Operational Finance will be responsible for all aspects of FP&A and Operational Finance and will lead a team of 3-4 program finance analysts. The Senior Finance Manager will be responsible for development and distribution of financial reports to stakeholders. The Senior Finance Manager must understand the requirements of both their internal and external customers and provide useful, timely data to assist in the reporting and decision-making process. The Senior Manager will lead preparation of monthly forecasts outlooks for Orders, Sales, EBIT, Cash and Working Capital. This role requires quick and detailed thinking as well as a willingness to teach and grow.

We are seeking a proactive, self-starter with the ability to work effectively in a team environment. Must possess excellent communication and interpersonal skills to be able to collaborate with key functional stakeholders. Ideal candidate must be detail oriented with good organizational skills and capable of multi-tasking and the ability to work with minimal day-to-day supervision. Successful candidates will demonstrate an aptitude for efficiency, problem-solving, and resourcefulness, with a commitment to quality while developing their leadership skills as a key business partner. This role will partner with the IEC Finance Lead to ensure forecasting accuracy and solid finance/accounting rigor are applied across the IEC portfolio of programs.

Essential Functions:

• Prepare financial summary for and ensure financials for Monthly Business Review, Monthly Financial Review (MFR), Management Rate Review (MRR) Annual Operating Plan (AOP), Joint Strategic Plan (JSP), and any other financial reviews are accurate and complete.
• Support month end and week soft closing activities including validating actuals, revenue recognition, cost and fee ceilings, and profit bookings.
• Analyze Estimate at Completion (EAC) and for impact to financials.
• Analyze Strategic Growth Plan (SGP) program forecasts and ensure business area outlook aligns with the long-term growth strategy.
• Analyze Contract Terms and Conditions for impact to revenue recognition and ability to execute within financial processes.
• Monitor overhead budgets and analyze labor utilization.
• Prepare monthly forecasts outlooks for Orders, Sales, EBIT, Cash, Working Capital and Discretionary Spending.
• Participate in customer meetings as required.
• Lead special projects as required.
• Responsible for consolidating and analyzing program forecasts to develop the short-term forecast (STF).
• Prepare meaningful variance analysis of actual versus forecast financial performance and trend analysis.
• Load and maintain programmatic forecast utilizing FCSTGov or similar tools.
• Lead the development, maintenance, and analysis of labor, material, department expense, and burden rates.
• Perform rate modeling and rate variance analysis.
• Assist government compliance with incurred cost submission.
• Manage Pools in CostPoint
• Flexibility to work in a fast-paced dynamic organization
• Frequently responsible for managing large, complex project initiatives of strategic importance to the organization, involving large cross-functional teams
• Supports significant improvements of processes, systems, solutions, or products to enhance performance of job area. May develop new concepts or standards
• Interfaces with Program Managers, Accounting, Functional Leads, and customers as the primary source of all financial information for the portfolio they support
• Interfaces with internal and external auditors in support of revenue recognition, accounting, EVMS, rate and other operational audits.
• Experience with contracts such as CPAF, CPIF, CPFF, T&M, FFP, etc.
• Serve as a hands-on manager who actively participates in day-to-day work, stepping in to execute tasks alongside the team
• Effective interpersonal and communication skills and ability to work independently with minimal supervision.
• Responsible for knowing/following L3Harris policies and procedures.
• Ability to obtain a US Secret Security clearance.

Qualifications:

• Bachelor's degree in accounting or finance and 12 years of related experience. Graduate Degree and a minimum of 10 years of related experience. In lieu of a degree, minimum of 16 years of prior related experience.
• 10+ years of experience in Finance
• 6+ years of experience DoD programs (all services and agencies) and International programs (DCS and FMS) and Federal Acquisition Regulations (FAR)
• 4+ years' experience with FP&A financial analysis, forecasting and reporting including variance explanations

Preferred Additional Skills:

• Demonstrated strong working knowledge of and Microsoft Office applications specifically Excel and PowerPoint.
• Advanced proficiency with MS Office (Word, Excel, PowerPoint, and Outlook), especially with Excel.
• Demonstrated Process improvement mindset
• Exposure to Hyperion/HFM desired
• Experience with Integrated Baseline Reviews and EVMS Surveillance Reviews
• Experience with Propricer
• Objective thinker, problem solver with ability to execute challenging tasks to completion
• Ability to influence cooperation and develop relationships with various people in different functional areas
• Knowledge of Federal Acquisition Regulations (FAR), Cost Accounting Standards (CAS), and Generally Accepted Accounting Principles (GAAP).
• Knowledge of cost/schedule development, budgeting, financial analysis and reporting, financial modeling, corporate forecasting, and/or business acquisitions.
• Experience with Deltek Cobra, Empower, Deltek CostPoint (ERP) Hyperion/Smartview, Oracle, and FCSTGov.

In compliance with pay transparency requirements, the salary range for this role is $126,000.00 MIN - $234,000.00 MAX. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements.

L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.

Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.

By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.

L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.

NEW RECRUITMENT AND RETENTION INCENTIVES! Air and Marine Operations (AMO), a component of U.S.

Customs and Border Protection (CBP) offers those with Merchant Mariner Credentials the exceptional opportunity of a career in law enforcement working with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission protecting America.

If you're looking for an exciting and rewarding job that also provides great pay, benefits, and job stability, now is the time to make your move: become a Marine Interdiction Agent .

AMO is actively seeking applicants to fill full-time security-based positions with the nation's largest law enforcement organization charged with maintaining the security of our national borders while facilitating lawful international travel and trade.

DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW! Salary and Benefits Begin your career as a Marine Interdiction Agent (MIA) and make up to $73,939–$96,116 per year based on your qualifications for the GS-11 grade level and possible extra compensation based on your duty location.

Recruitment Incentive: New hires that are eligible may receive a one-time Recruitment Incentive payout of $10,000 after completing Federal Law Enforcement Training Academy (FLETC) (1 year service agreement will need to be completed) (Recruitment Incentive is only available to new Federal employees as described in 5 CFR 575.102.

Eligibility will be determined by Human Resources.) Example annual compensation for the first three years at our CAMB and subordinates new-hire locations (RUS LEAP 25% Retention Incentive).

GS-11 1st year annual pay
- $102,424 GS-12 2nd or 3rd year annual pay
- $132,931 GS-13 3rd year of annual pay
- $158,075 Example annual compensation for the first three years at our Key West, Key Largo, and Marathon, FL new-hire locations (Locality Salary Table LEAP 25% Retention Incentive) GS-11 1st year annual pay
- $108,431 GS-12 2nd or 3rd year annual pay
- $141,575 GS-13 3rd year of annual pay
- $168,352 Example annual compensation for the first three years at our Long Beach, CA new-hire locations (Locality Salary Table LEAP 25% Retention Incentive) GS-11 1st year annual pay
- $107,749 GS-12 2nd or 3rd year annual pay
- $154,974 GS-13 3rd year of annual pay
- $184,285 This career ladder position has a grade level progression of GS-11, GS-12 and GS-13.

You may be eligible for a promotion to the next higher grade level automatically (without re-applying) once you complete 52-weeks at each grade level (with supervisor approval) and any additional training, licensing, and certification requirements.

Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.

Recruitment Incentive (RI): Upon Entrance on Duty (EOD), you may be eligible to receive a Recruitment Incentive LEAP: Law Enforcement Availability Pay (25% Everyone) RI: Retention Incentive (25% for Caribbean Air and Marine Branch (CAMB) Locations, Key Largo, FL, Key West, FL, Marathon, FL and Long Beach, CA)
*Retention Incentive is contingent on eligibility.

Eligibility will be determined by Human Resources Duty Locations A duty location will be offered after successful completion of the pre-employment process.

The duty location listed in the final offer letter may include any geographic location within the Southwest Region, Southeast Region or Caribbean Air and Marine Branch.

Note: Your opportunity for final selection is increased based on your flexibility to Enter on Duty at priority duty location.

Current possible duty locations include: Southeast Region: Fort Lauderdale, Miami and Marathon, FL and CAMB: Fajardo, Mayaguez, Ponce, and San Juan PR; and Saint Thomas, VI Northern Region: Bellingham, WA Limited Duty Locations as of – 1 2/1/2025 Applying to this JOA does not guarantee any of the locations listed below will still be available once you've completed the pre-employment process.

Locations are offered based on the current needs of the service at that time.

Northern Region: Port Huron, MI Southeast Region: Houma, LA Southwest Region: San Diego, CA Duties and Responsibilities As a Marine Interdiction Agent, you will perform marine-based law enforcement operations for the detection, prevention, interdiction, and apprehension of terrorists, terrorist weapons, and other contraband and persons from illegally entering or attacking the United States.

Typical duties may include: Monitoring behavior patterns and activities of suspect persons, vehicles, or vessels believed to be engaged in illegal activities.

Interpreting radar data to calculate appropriate intercept while tracking vessels and people to a successful interdiction.

Searching persons, vessels, baggage, and cargo for contraband or weapons incidental to detention or arrest.

Collecting, refining, and analyzing strategic and tactical intelligence.

Qualifications This GS-11 grade level position has a selective factor: As a minimum qualification requirement all candidates must have a qualifying Merchant Mariner Credential.

See the U.S.

Coast Guard Issued Merchant Mariner Credentials (MMC) section that is listed below for qualifying capacities.

You qualify for the GS-11 grade level if you possess one (1) year of specialized experience equivalent to at least the next lower grade level, performing duties such as: Independently applying advanced skill in controlling/commanding law enforcement scenes to include conducting searches, making arrests, processing arrests and seizure of evidence and property.

Conducting investigative inquiries using various techniques, examining files and records, physical and documentary evidence to identify logical conclusions.

Utilizing cameras and other electronic high-tech surveillance equipment to gather evidence, collect, evaluate, and then preserve that physical and documentary evidence.

Highly skilled in writing comprehensive arrest, criminal and incident reports.

Assisting government or state attorneys in preparation for court cases or grand juries, testifies as a law enforcement officer in court proceedings, and administrative forums.

Considerable experience applying arrest authorities and constitutional law in various alleged criminal situations, or knowledge and experience of CBP laws, regulations, policies, legal precedent.

OR GS-11 Education Substitution for experience: A Ph.D.

or equivalent doctoral degree, three (3) full years of progressively higher-level graduate education leading to such a degree, or LL.M.

OR Combining Experience and Education: A combination of successfully completed post-bachelors' education (above) and experience.

This will be calculated using your resume and unofficial transcripts submitted with your application.

AND U.S.

Coast Guard Issued Merchant Mariner Credentials (MMC): You must submit a valid, legible copy of your Merchant Mariner Credential at time of application.

Your copies must include the expiration and capacity pages of your MMC.

Qualifying Capacities are Operator of Uninspected Passenger Vessel (OUPV), Mate of 200 gross tons or greater (Inland, Great Lakes, Near Coastal or Oceans), Chief Mate, Second Mate, and Third Mate Unlimited Oceans or Master of 25 GRT or greater (Inland, Great Lakes, Near Coastal or Oceans) OR An Accepted MMLD Application: You must submit proof an accepted MMLD application, for a MMC with a qualifying capacity, and a credential status that is in a positive standing.

It cannot be pending additional information for MMLD application process.

You must have your Official MMC Credential in hand at the time of scheduling and at assessment appointment.

NOTE: Your resume must explicitly indicate how you meet this requirement, otherwise you will be found ineligible.

Please see the "Required Documents" section below for additional resume requirements.

Other Requirements Citizenship : You must be a U.S.

Citizen to apply for this position.

Residency : You must have had primary U.S.

residency (includes protectorates as declared under international law) for at least three of the last five years.

Age Requirement: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions.

Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03.

The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C.

8336(c) or Title 5 U.S.C.

8412(d).

AGE WAIVER: Creditable law enforcement officer service
- Covered by Title 5 U.S.C.

8336(c) or Title 5 U.S.C.

8412(d), or creditable service covered by Title 5 U.S.C.

8401(36) (as a Customs and Border Protection Officer) on or after July 6, 2008, may be applied toward the maximum age requirement.

This age restriction may not apply if you are currently serving in a federal civilian (not military) law enforcement position covered by Title 5 U.S.C.

8336(c) or Title 5 U.S.C.

8412(d).

Veterans' Preference Eligibility
- To ensure compliance with statutes pertaining to the appointment of preference eligible veterans as determined by the Merit Systems Protection Board in its decision Isabella v.

Dept of State, the maximum age for original appointment articulated above shall not apply to the hiring of individuals entitled to veterans' preference eligibility under 5 U.S.C.

3312.

You must submit proof of Veteran's Preference (DD-214 Member 4 Copy) at the time of application.

Training : This position has a training requirement.

You may be required to successfully complete the training requirement as a condition of employment.

Failure to successfully complete the required course(s) of training in accordance with CBP standards and policies will result in placement into either a former or different position, demotion, or separation as determined by management and appropriate procedures.

Travel Required: You may be expected to travel for this position based on operational needs.

How to Apply Click the Apply button on this site.

You will be linked to the CBP Talent Network registration page.

For Position of Interest select Air and Marine Operations (Marine Interdiction Agent (MIA)), then complete the pre-screening questions.

You'll then receive a link(s) to the MIA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application.

Be certain to review ALL details of the job opening announcement and follow all instructions in the application process.

As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with AMO and CBP.

Do you want to become a surrogate? We are now offering a sign on bonus to all qualified and matched surrogates that sign contracts. The first step is to fill out our surrogate application. A fertility specialist will contact you to continue the process. For intended parents interested in surrogacy to start or grow their families please contact us today. The surrogacy process is complex, but we will be with you every step of the way. Call today to get started.

Women who may have the ability to produce eggs but are unable to use their uterus or do not have a uterus, may consider a surrogate. A donated egg may also be used with the surrogate in the event a woman cannot produce her own eggs or her uterus is not intact or insufficient to carry a pregnancy. In either case, the husband's sperm, if viable, may be used.

Using an egg donor unrelated to the surrogate carrier eliminates any biological tie. The egg of the surrogate is never used as part of the assisted reproduction process, so that a surrogate is never in the position of delivering her own biological child.

The basic requirements of a woman to serve as a surrogate are:

• Emotionally stable
• Responsible
• In good physical health
• Non-smoker
• Has had at least one successful pregnancy
• Is capable of carrying a child to full term

A woman is not required to fall within a particular age range to serve as a surrogate, but most intended parents prefer a surrogate under the age of 40. For more information on surrogacy please see the documents on the left side of this page.

In Texas, there is a judicial process for validating the Gestational Contract (the contract between the intended parents and the surrogate). Included within the various requirements for having a Gestational Contract validated by a Texas court is that the intended parents must be married and the surrogate must have previously carried a child to term. Additionally, there are residency requirements that apply to either the surrogate or the intended parents, but not both.

Compensation for a surrogate services generally starts in the range of $35,000 - $40,000, for base compensation with over all fees up to 70k, in many cases. The amount of compensation is dependent upon a variety of factors, including, but not limited to, whether the surrogate carries twins, what procedures a surrogate is required to undergo and whether the delivery is vaginally or by cesarean section.

Physicians| Dermatologists | City of Hope (CA)

Join one of the top cancer centers in the nation! Our rapidly expanding, nationally recognized cancer institute we seek to hire a Dermatologist to join our practice at City of Hope in Duarte and Irvine CA. We are seeking research and mission- minded physicians as every discovery we make and every new treatment we create, gives people the chance to live longer, better, and more fully.

The Department of Surgery, Division of Dermatology, is seeking two (2) dynamic, highly-qualified, board certified or eligible Dermatologist to meet the needs of our growing program in Southern California.   Our Division provides excellence in general dermatology, cutaneous oncology, cutaneous lymphoma, and onco-dermatology care. City of Hope is a top comprehensive cancer center in the United States with a national presence, particularly notable for conducting more than 800 bone marrow transplants annually. The Dermatologist can look forward to providing patient-centered care in collaboration with a world class, nationally recognized   multidisciplinary team of specialists. This is a full-time position reporting to the Division Chief of Dermatology.

• Clinical sites: one opening on main campus in Duarte, CA and one opening in Irvine, CA (site of our new hospital!)
• Wonderful colleagues and a collaborative team environment
• Opportunities for program growth include candidates with interests in graft versus host disease, cutaneous lymphoma, advanced skin cancers, adverse reactions to cancer treatment, and primary care dermatology for cancer survivors. In addition, there are research opportunities (basic science, translational, health outcomes) for candidates with a particular interest.
• Provide patient-centered care in collaboration an established multidisciplinary team of physicians and nurses at a state-of-the-art outpatient clinic facility.

Position Benefits :

• Excellent benefits package, including a generous retirement contribution plan 
• Relocation assistance may be available 
• Salary Range: $350K - $500K.  The range listed is exclusively for base compensation for full-time employment and does not include incentive compensation or benefits. Actual compensation will be adjusted for experience, training, hospital/community need and other factors.
• Benefits information:  City of Hope Medical Group Benefits

Qualifications:

• Experience working in an academic medical center or specialty cancer center that delivers both clinical and translational research serving the adult oncologic patient
• Be well versed in the state of cancer care and the latest research and innovations
• Academic record consistent with appointment of Assistant Clinical Professor (at the minimum)
• The ideal candidate must participate in clinical research and demonstrate a commitment to research as shown by submission of publications and presentations on international and national stages
• Applicants must have a M.D., M.D./Ph.D., or equivalent degree, and be Board certified/eligible by the American Board of Dermatology
• The selected candidate for the position must be eligible to obtain or already hold an active California medical license