Engineering Journal Impact Factor Jobs in Powell Ohio

Machine Vision / Controls Engineer

Do you enjoy:

• Working on new automation challenges every few months
• Performing vision feasibility testing and proving out inspection methods
• Researching and implementing new automation technologies
• Managing your work with a high level of autonomy
• A blend of desk work (~70%), shop work (~20%), and field work (~10%)
• Working in a small engineering-driven company where your work has visible impact

Job Description:

We are looking for a Machine Vision / Controls Engineer to join our fast-paced automation engineering firm. This role focuses on developing machine vision inspection systems while also supporting controls development and feasibility testing for custom automation equipment.

You will perform vision feasibility studies, camera/lens/lighting selection, and vision programming, primarily using Keyence Machine Vision systems. In addition, you will support PLC programming, system integration, and automation debugging on our custom machines.

This position works closely with mechanical, electrical, and controls engineers to integrate machine vision, robotics, motion control, and PLC systems into complete automation solutions.

Engineered Vision is dedicated to improving how factory automation projects are implemented through transparency, quality, and speed.

Duties:

• Perform machine vision feasibility testing in our lab to validate inspection concepts and system performance
• Size and select cameras, lenses, and lighting for vision inspection applications
• Develop and program machine vision systems (primarily Keyence)
• Integrate vision systems with robots, PLCs, and motion control systems
• Program and support PLC controls systems (primarily Allen Bradley ladder logic)
• Assist with controls debugging and automation system integration
• Support machine builds, testing, and troubleshooting in the shop
• Assist with system commissioning and startup at customer facilities
• Create and maintain vision documentation, feasibility reports, and technical documentation
• Collaborate with mechanical and electrical engineers to optimize inspection and automation performance
• Deploy systems at customer facilities and perform service work
• Travel up to 15% (mostly within 250 miles of Columbus, Ohio)

Required Qualifications:

• US Citizenship Required (we work on Government Projects – Green Card will not be acceptable)
• Must live in the Columbus, Ohio area
• Bachelor of Science in Electrical Engineering, Computer Engineering, Mechanical Engineering, Mechatronics, or related field
• Experience performing machine vision feasibility testing and inspection development
• 2+ years experience working in industrial automation including: selecting vision cameras/lenses/lights, feasibility testing, and vision programing
• Ability to troubleshoot and optimize automation systems in real-world manufacturing environments
• Strong documentation and communication skills

Preferred Qualifications:

• 5+ years experience working in industrial automation selecting vision cameras, lenses, and lighting
• 2+ years experience with machine vision programming of Keyence Machine Vision Cameras
• 2+ years experience working with a custom machine builder as a controls engineer
• Experience integrating vision with robots and PLC systems
• Experience with industrial lighting design and lens selection
• Customer run-off and field troubleshooting experience
• Ability to troubleshoot and optimize automation systems in real-world manufacturing environments

About Us:

Engineered Vision is a small custom machine builder focused on newer technologies including robots, machine vision, and motion control. We opened our doors to deliver affordable automation fast, with typical project sizes ranging from $100k–$2MM.

Engineered Vision is one of the fastest growing custom machine design and engineering firms in Columbus, Ohio. We integrate our machines across industry boundaries and pair the latest technologies with real industry needs to deliver strong ROI.

We consider our shop an engineer’s playground with robots, machine vision systems, CNC machining, and 3D printing.

We look forward to working with you.

Job Type: Full-time

Benefits:

• 401(k)
• Dental insurance
• Health insurance
• Health savings account
• Life insurance
• Paid time off
• Referral program
• Vision insurance

Schedule: Full-Time

Work Location: In person

Project Design Engineer

Locations: Phoenix, AZ | Columbus, OH | Cincinnati, OH

A nationally recognized architectural and engineering consultancy is looking to add a technically sharp and forward-thinking Project Design Engineer – Structural to their team. With offices in key markets and a reputation for innovation and quality, this firm is known for tackling projects that span commercial, civic, and institutional sectors. You're being invited to join a dynamic team where your skills in structural design will be valued, and you'll have plenty of chances to learn and grow alongside talented colleagues in a supportive atmosphere.

What You’ll Do:

• Contribute to the design and documentation of building structures using steel, concrete, timber, and hybrid systems.
• You'll play a key role in ensuring structural elements meet regulatory standards and are thoroughly analyzed for both new construction and renovation initiatives.
• Work closely with project managers on design intent, deliverables, and timelines.
• Collaborate with architects, MEP engineers, and other stakeholders to align structural solutions with project goals.
• Participate in quality checks, internal reviews, and technical coordination across project milestones.
• Help assess design challenges and offer technical input to guide project direction efficiently.

Qualifications:

• A background in civil or structural engineering with a bachelor's degree is required, and having a postgraduate degree would be a significant advantage.
• A strong background in structural engineering and building design is expected, with familiarity with a variety of materials and systems.
• EIT with active progress toward PE/SE licensure, or currently licensed as a PE/SE.
• Familiarity with relevant building codes and experience using structural modeling tools.
• Team-first mindset with a track record of positive collaboration and quality execution.

Why Join This Firm?

• Work on impactful projects that are shaping skylines and communities nationwide.
• Mentorship from experienced professionals and a budgeted path for continuing education.
• Strong internal culture that promotes autonomy, creativity, and career progression.

Benefits include:

• Comprehensive health, dental, and vision plans
• 401(k) with match
• Paid time off and company holidays
• Annual bonus potential
• Student loan repayment options
• Certification/licensure reimbursement
• Flexible schedules and work/life balance support

If you’re ready to grow your technical capabilities while making a lasting impact through structural design, this role offers a compelling path forward.

About Blue Signal:

Blue Signal is an award-winning, executive search firm specializing in various specialties. Our recruiters have a proven track record of placing top-tier talent across industry verticals, with deep expertise in numerous professional services. Learn more at /46Gs4yS

JOB DESCRIPTION

Our client is looking for an Engineering Designer to join the team! This is an onsite position in Columbus, OH. Will be fully in the office to design a variety of work orders focused on Power and Electrical Distribution projects. The role utilizes client-specific software and offers full training! This company offers room for growth with exposure to different projects and teams! This is a long term, stable opportunity.

REQUIRED SKILLS AND EXPERIENCE

• Associates or bachelor’s in engineering-related field, example degrees: Engineering Technology, Applied Sciences, Mathematics, Geography, Construction Management, etc OR 1+ years of experience within CAD design or utilities
• Ability to sit onsite
• Great customer service skills
• Adaptability to changing client priorities

NICE TO HAVE SKILLS AND EXPERIENCE

Utilities, Electrical, or Power Distribution experience CAD design experience

AGE Solutions is seeking an Audio-Visual Command Meeting (AVCM) Engineer. In this role, you will travel within their assigned zone to support Senior Executive Services (SES) and Military Officer conference and meeting spaces. This role provides installation, troubleshooting, and sustainment support for enterprise audio-visual systems and will augment support to other zones as required. The ideal candidate is a hands-on AV professional with strong technical expertise, the ability to lead AV efforts on-site, and experience working in classified environments.

This position is based out of Columbus, OH with regional CONUS travel requirements.

Key Responsibilities:

• 
  
• Travel within assigned zone and provide augmentation support to other zones as needed
  
• Support SES and Military Officer conference and meeting spaces
  
• Install, pull, terminate, label, and test all AV-related cables, connectors, and interfaces
  
• Install projection screens, plasma/LED displays, speakers, and related AV hardware
  
• Perform installation of AV systems at client sites, including full room deployments
  
• Read and interpret blueprints, drawings, and technical documentation
  
• Wire and build AV racks to standard and customer specifications
  
• Serve as the Lead Audio Visual Engineer on projects and customer engagements
  
• Manage AV projects across various models and makes of equipment
  
• Conduct testing, analysis, troubleshooting, and corrective actions on systems, networks, hardware, and software
  
• Demonstrate thorough understanding of AV wiring standards and connector types across AV cable types
  
• Support internet-based video solutions including switchers, codecs, interfaces, and room design solutions
  
• Access classified areas to support Enterprise JWICS installation and troubleshooting of system hardware (user account not required).
  

Required Qualifications:

• 
  
• Five (5) years of relevant experience with AV engineering
  
• Must have an active DoD Top Secret clearance at a minimum
  
• Must have one (1) of the following certifications:
  
  • 
    
  • AMX Technician (Networked AV) Certification
    
  • Crestron CTI Technician Track Certification
    
  • AVIXA CTS Certification
    
  
  
  
• Ability to support mission-critical AV/VTC systems under pressure
  
• Demonstrated experience working with:
  
  • 
    
  • Crestron
    
  • Cisco
    
  • Biamp / AMX
    
  • Extron
    
  
  
  
• Willingness to travel throughout the zone as required
  
• Strong troubleshooting skills to quickly diagnose and restore AV/VTC services
  
• Ability to follow escalation procedures and provide status updates and corrective action plans to leadership/PMO
  
• Experience using a ticketing system (e.g., ServiceNow) to document troubleshooting, actions taken, and resolution details
  
• Ability to provide routine ticket updates until closure and document root cause and resolution steps
  
• Ability to provide daily operational status reporting for non-operational rooms, including estimated restoration timelines
  
• Location: This position is onsite at our customer's location in Columbus, OH and requires up to 50% travel (CONUS).
  

Compensation: $70,000+

At AGE Solutions, we reward performance, invest in growth, and share success. Our benefits support the whole person, professionally, financially, and personally.

• 
  
• 26 Days Paid Leave: Includes vacation, sick, personal time, and holidays. You choose how to use it.
  
• Performance Bonuses: Performance bonuses are awarded based on individual contributions and company-wide results, aligning recognition with impact.
  
• 401(k) with Match: We match 3% of your contributions with immediate vesting.
  
• Financial Protection: Company-paid life insurance up to $300K and options for additional coverage for you and your dependents.
  
• Health Benefits: Multiple medical plans, dental, vision, FSA and HSA options to fit your needs.
  
• Parental Leave: 15 days of fully paid leave for new parents, because family matters.
  
• Military Differential Pay: We bridge the gap for employees on active duty, so they don't take a financial hit while serving.
  
• Professional Growth: Paid training and certifications, tuition reimbursement, and the tools and tech to get the job done right.
  
• Shared Success: In the event of a company sale, our CEO has committed to returning 80% of net proceeds to employees. This ensures our team shares in the long term value they help create.
  

At AGE, you'll do work that matters, supported by a company that delivers for its people.

About Us

Clayco is a full-service, turnkey real estate development, master planning, architecture, engineering, and construction firm that safely delivers clients across North America the highest quality solutions on time, on budget, and above and beyond expectations. With $5.8 billion in revenue for 2023, Clayco specializes in the "art and science of building," providing fast track, efficient solutions for industrial, commercial, institutional, and residential-related building projects.

The Role We Want You For

In this role, you will manage the organization and direction of project construction activities and oversee total site management including supervision of client contractors, field engineering, contract administration, cost and schedule, field procurement, and finance and accounting. Your leadership will ensure project operations are compliant, safe, timely, within scope and budget, and clients are satisfied.

This key project leader for Clayco’s Field Operations team will oversee construction of 100MM - 500MM or more and will be assigned to the as the Construction Manager/Superintendent on Mission Critical projects.

The Specifics of the Role

• Responsible for the organization and direction of all on-site construction related activities and the primary contact for all project field activities.
• Ensure construction operations are in compliance with design, specifications, and that construction operations are completed on schedule, within budget and to quality standards.
• Responsible for site management including management of construction subcontractors, professional staff to include field engineering, contract administration, cost and schedule, field procurement, finance and accounting services, and workforce services. Responsible for managing and maintaining detailed daily reports.
• Ensures the development and execution of project automation plan, environmental compliance plan, safety plan, site survey plan, non-manual staffing plan, subcontracting plan, labor strategy, construction execution plan, and job-site work rules.
• Responsible for implementation of Clayco’s safety program, security, housekeeping, and fire protection on the construction site and ensures strict adherence Federal and State safety codes.
• Ensures the field organization is composed of qualified and knowledgeable personnel and ensures effective personnel utilization.
• Establishes and implements construction schedules, methods, manning charts, material, and equipment requirements.
• Responsible for field project performance and analyzes performances for adherence to quality standards and schedules.
• Plans and establishes procedures to ensure all construction operations meet engineering designs and specifications.
• Ensures Clayco’s policies and procedures are fully implemented.
• Establishes project field procedures to be worked in conjunction with the Clayco’s standards, as necessitated by project conditions.
• Collaborates with the jobsite team to ensure labor harmony throughout the project.
• Partners with the project management team to maintain effective client relationship and is the primary contact for client's communication with the field activities.
• Maintains effective relationships with other functional departments.
• Develops, implements, and administers a job-site security plan and coordinates the activities with Clayco’s security department.
• Works with the project management team to participate in all job-site's contractual activities. Participates in contracts and subcontracts negotiations.
• Participates in the development and implementation of a training program to ensure subordinate personnel receives progressive training to enable them to assume additional responsibilities and is responsible for overall development of construction training and any testing as required.
• Works with Clayco’s safety team in the development of the project safety program and ensures strict adherence to Company, federal, state, and local safety regulations.
• Ensures the implementation of an effective community relations plan for the site.
• Ensures required permits and licenses are in place prior to the start of the affected work at site.
• Responsible and accountable for construction license reporting to include construction Logbook entries and required notifications for permit closure.
• Partners with the project management team for the implementation of cost savings methodologies in the Construction organization and the promotion of other continuous improvement processes.
• Ensures development and execution of strategies and plans for project automation, environmental compliance, safety, site surveying, non-manual staffing, contracting, labor strategy, construction execution, and job-site work rules.
• Plans and establishes procedures to ensure construction operations meet engineering designs and specifications.
• Coordinate with the Field Operations Manager for all assignment of Superintendent and Foreman positions.
• Support Superintendent(s) throughout the duration of the job.
• Review project schedules with Superintendents/Foreman.
• Document project field issues that impact budget, quality, or schedule, and provide to the project management team.
• Ensure subcontractor requests for field issues that impact budget, quality, or schedule are documented and are forwarded to the project management team.
• Follow guidelines of the Project Quality Assurance/Quality Control (QA/QC) program written for the job site.

Requirements

• Bachelor's or Master's Degree in Civil Engineering, Construction Management, related technical degree or relevant work experience in lieu of education.
• 20-25 years of relevant experience, with progressive responsibility and technical knowledge both scope and value of project.
• Technical knowledge and experience of relevant construction methods and systems including:
• Utility relocates and slope stability works.
• Full understanding of multiple mission critical platforms.
• Full understanding and working knowledge of high voltage, medium voltage, and low voltage systems. General understanding of BMS and EPMS Systems.
• Full understanding and coordination of Utility relocations, underground medium voltage systems, and BIM modeling coordination of ALL utilities both above and below ground.
• Full understanding and managing of all LOTO procedure's and FOD inspections for all systems.
• Ability to research and understand local codes and jurisdictional requirements for the project.
• Knowledge of project-specific environmental compliance requirements.
• Experience with successful interface management on Data Center/Mission Critical projects.
• OSHA 30 required.
• Ability to walk the job site, climb ladders, and multi floor scaffolding.
• Ability to lift objects at least 50lbs.

Some Things You Should Know

• This position will service our clients in Columbus area
• No other builder can offer the collaborative design-build approach that Clayco does.
• We work on creative, complex, award-winning, high-profile jobs.
• The pace is fast!
• This position is classified as a safety-sensitive role in accordance with applicable state and federal laws. Candidates selected for this position will be subject to a comprehensive background check, which includes mandatory drug testing.

Why Clayco?

• 2025 Best Places to Work – St. Louis Business Journal, Los Angeles Business Journal, and Phoenix Business Journal.
• 2025 ENR Midwest – Midwest Contractor (#1).
• 2025 ENR Top 100 Design-Build Firms – Design-Build Contractor (Top 5).
• 2025 ENR Top 100 Green Contractors – Green Contractor (Top 3).
• 2025 ENR Top 25 Data Center Builders – Data Center Contractor (Top 3).

Benefits

• Discretionary Annual Bonus: Subject to company and individual performance.
• Comprehensive Benefits Package Including: Medical, dental and vision plans, 401k, generous PTO and paid company holidays, employee assistance program, flexible spending accounts, life insurance, disability coverage, learning & development programs and more!

Compensation

• The salary range for this position considers a wide range of factors in making compensation decisions including but not limited to: Education, qualifications, skills, training, experience, certifications, internal equity, and location. Compensation decisions are dependent on the facts and circumstances of each case.

Dr. Nizar Saad’s lab is seeking a postdoctoral scientist to join a translational research program advancing RNA-based and genome-editing therapies for rare genetic diseases. The lab develops RNA-, and CRISPR-based approaches for laminopathies and muscular dystrophies, using viral and non-viral delivery platforms (i.e., AAV and extracellular vesicles (EVs)). The lab also leads EV-based biomarker discovery efforts in muscular dystrophies. This position will require experience in EV and/or AAV isolation, purification, and characterization, -omics workflows, mouse work, including dosing and tissue collection. Experience in EV and/or AAV engineering is desired. Experience in cardiovascular or skeletal muscle biology is preferred. Additional details:

• NIH-funded grant: Lab page: functions

  
  

  • Conducts research under the guidance of a faculty mentor.
  • Assists in the training and supervision of technical support staff in performing research essential to carrying out the research program.
  • Records and analyzes data generated by the research study. Assists in the development of hypotheses for further investigation from the results of the studies performed.
  • Assists with the preparation of scientific and technical papers for publication in peer-reviewed journals.
  • Presents findings at local and national research forums.
  • Collaborates with other ongoing research efforts either at NCH or at The Ohio State University.
  • Works toward research independence, preparing to submit proposals to and obtain funding from external granting agencies.

  
  

  Education

  
  

  • PhD in relevant scientific field.

  Qualifications

  
  

  • Effective interpersonal skills required in interactions with scientists, physicians, and laboratory colleagues.
  • Ability to work independently, and to proactively manage and lead projects.
  • Strong data analysis, interpretation, and scientific communication skills.
  • Skills in qualitative and quantitative research methods.
  • Prior experience in molecular biology and Extracellular vesicle research.
  • Track record of productivity (papers, presentations).

  
  

  Required Skills

  
  

  • PhD in molecular biology, genetics, bioengineering, or a related field.
  • Strong background in molecular and cellular biology techniques (e.g., cloning, transfection, qPCR, Western blotting, immunofluorescence).
  • Experience with mammalian cell culture (primary cells and/or immortalized cell lines).
  • Hands-on experience with extracellular vesicle (EV) isolation, purification, and characterization.
  • Experience with proteomics workflows (e.g., mass spectrometry–based proteomics).
  • Experience with transcriptomic approaches (bulk RNA-seq and/or small RNA-seq).
  • Basic bioinformatics skills for proteomic and transcriptomic data analysis.

  
  

  Preferred Skills

  
  

  • In vivo mouse work, including dosing and tissue collection.
  • Experience with EV engineering and cargo loading strategies.
  • Familiarity with muscular dystrophies or neuromuscular disease models.
  • Experience with viral and non-viral gene delivery platforms (e.g., EV, AAV).
  • Experience with biomarker discovery pipelines and translational research.

ABOUT US

MAC Construction is a multi-generational family business with over 50 years of excellence in commercial construction. Now led by the 3rd generation of McEnery family members, brothers Steve and Matt, we continue the legacy of our founders by building enduring projects and partnerships with clients.

Our diverse portfolio includes multi-unit retail, restaurants, offices, and industrial facilities across the region. With each project, MAC aims for exceptional results and a positive legacy impact for clients, engaged team members, and the neighboring community.

Our values, learned from our family's leadership, are embodied in the acronym C.R.E.S.T.: Customer Focus, Respect for People, Excellence in Execution, Safety, and Team Collaboration.

OUR VALUES

• Customer Focus: We consistently deliver exceptional service by educating, collaborating, and engaging with our clients. Our goal is to make a positive impact beyond the construction site, building lasting relationships based on trust, integrity, and timeliness.
• Respect for People: We treat everyone with kindness, compassion, and respect. We honor our heritage and operate with honesty and transparency, dedicated to investing in our team's growth and development.
• Excellence in Execution: We strive for excellence in every project we undertake by committing ourselves to completing every project on time. We pay attention to detail, uphold high standards, and continuously seek improvement to ensure the highest quality outcomes.
• Safety: We maintain safety in every aspect of our work, from conference rooms to construction sites. We take responsibility for our actions, overcome challenges with determination, and always prioritize safety.
• Team Collaboration: We value teamwork and believe that collaboration leads to better results. We foster an inclusive environment where every team member's contribution is respected and valued, working together to achieve our common goals.
  

WHAT IT'S LIKE

Our culture is one rich in development and feedback, we believe our company is strong because our people are strong. We strive to set expectations and clear goals from day one, so our team can feel empowered to take ownership over their projects and their careers. It's important to MAC Construction that our team feels supported and is always looking for what they can bring to a project, not what they take away from it.

ESSENTIAL FUNCTIONS OF A MAC SENIOR ESTIMATOR

Estimating Leadership

• Lead and manage the preparation of detailed cost estimates for projects from conceptual through final bid documents.
• Establish bid strategies and ensure complete, accurate scope coverage across all divisions.
• Review and validate all estimates prior to submission, ensuring that pricing aligns with project drawings, vendor proposals, and company standards.
• Provide oversight and mentorship to estimating staff on takeoffs, bid leveling, and proposal documentation.
• Identify and communicate value engineering opportunities to improve cost efficiency without sacrificing quality.
  

Bid and Proposal Management

• Manage the full bid process from RFP intake through submission, including document control, trade solicitation, bid coverage, and leveling.
• Develop project-specific scope sheets and bid forms, confirming all trades have complete and current information.
• Lead bid-day analysis and ensure that all proposals reflect a complete and accurate scope.
• Assemble and deliver professional, client-ready proposal packages that communicate clarity, confidence, and alignment with project requirements.
• Support pre-bid meetings and post-bid interviews as needed to represent MAC’s estimating team.
  

Preconstruction Collaboration

• Collaborate with design teams, project managers, and field leadership to identify constructability issues, schedule implications, and risk areas.
• Partner with operations on handoff deliverables, ensuring all bid assumptions, vendor selections, and clarifications are documented and accessible in Procore.
• Participate in project handoff meetings and support field teams in understanding estimate logic and scope breakdowns.
  

Vendor and Subcontractor Relations

• Build and maintain strong relationships with subcontractors and suppliers to ensure competitive pricing and reliable coverage.
• Lead pre-bid scope review calls and ensure alignment on inclusions, exclusions, and assumptions.
• Review and level all subcontractor bids, tracking historical data for future reference.
• Maintain MAC’s preferred vendor database and ensure consistent communication with trade partners.
  

Process Improvement & Data Management

• Support the development and refinement of MAC’s preconstruction procedures and SOPs.
• Maintain historical cost data and use it to inform conceptual and schematic budgets.
• Assist in establishing performance metrics for estimating accuracy, proposal timeliness, and bid hit rate.
• Leverage technology (Procore, ProEst, Bluebeam, Excel, Smartsheet) to streamline estimating workflows.

ESSENTIAL SKILLS, QUALIFICATIONS, AND REQUIREMENTS OF A MAC SENIOR ESTIMATOR

• Deep understanding of construction means, methods, and cost structures across commercial building types.
• Proficiency in Procore, ProEst (or equivalent estimating software), Bluebeam, and Microsoft Office Suite.
• Familiarity with data center, industrial, or MEP-intensive project estimating preferred.
• Ability to lead meetings with clients, architects, and subcontractors confidently and professionally.
• Bachelor’s degree in Construction Management, Engineering, or related field preferred.
• Minimum 8–12 years of progressive estimating experience with a commercial general contractor.
• Experience in both conceptual and hard-bid estimating is required.

COMPENSATION AND BENEFITS

The typical annual base salary range for this role is $95-129k. The base salary offer will depend on experience and other relevant factors. This role is eligible for project bonuses as well as an annual incentive plan. 

In addition to the above compensation, as a member of the MAC team, you are eligible for the following benefits:

• Individual Healthcare and Dental coverage (80/20 split for employee, 50/50 split for dependents)
• 401k Plan - up to 4% Matching 
• Paid Days off - starting at 3 weeks and 6 federal holidays
• HSA
• Parental Leave 
• Company Vehicle, including insurance coverage or allowance 
• Company-issued smartphone or phone allowance
• Company gas card
• Group Term Life Insurance
• Long-Term Disability Insurance
• Tuition reimbursement
• Continuing Education 

MAC Construction is an equal opportunity employer and motivated to consider applicants without regard to race, color, religion, sex, national origin, age, disability or genetics.

Immediate need for a talented Cybersecurity Sr. Specialist. This is a 12+ Months Contract opportunity with long-term potential and is located in Columbus, OH and Altavista, VA(Onsite). Please review the job description below and contact me ASAP if you are interested.

Job Diva ID: 26-07658

Pay Range: $40 - $44/hour. Employee benefits include, but are not limited to, health insurance (medical, dental, vision), 401(k) plan, and paid sick leave (depending on work location).

Key Responsibilities:

• Conduct cybersecurity risk assessments and vulnerability management across OT environments.
• Work closely with site engineering, operations leadership, corporate IT/OT teams, vendors, and system integrators.
• Identify and mitigate cyber threats impacting manufacturing equipment and control systems.
• Help design secure architecture across IT and OT overlapping environments.
• Manage security incidents and ensure controlled response during threats.
• Develop and maintain risk registers, security controls, and mitigation plans.
• Communicate risks effectively and influence stakeholders who may not initially recognize security threats.
• Initial focus will be two manufacturing sites (Columbus & Altavista).
• First 90 days priorities:
• OT asset inventory
• Threat modeling
• Risk registration
• Incident response planning
• The goal is to protect manufacturing OT assets from cyber threats while maintaining uninterrupted 24/7 plant operations.
• Conduct cybersecurity risk assessments for software, systems, and network infrastructure.
• Perform threat modeling using tools such as STRIDE.
• Conduct and support vulnerability assessments and penetration testing.
• Ensure compliance with relevant standards and regulations (e.g., ISO 27001, NIST SP 800-82, FDA, HIPAA, GDPR, PCI DSS, etc).
• Monitor and interpret changes in global cybersecurity regulations and standards, integrating them into Client Nutrition policies and procedures.
• Support internal and external audits, including remediation coordination at Client Nutrition sites.
• Collaborate with engineering and development teams to design secure system architectures.
• Guide teams in applying cybersecurity controls throughout the software development lifecycle (SDLC).
• Monitor cybersecurity threats and develop mitigation strategies.
• Respond to and investigate cybersecurity incidents, identifying root causes and recovery actions.
• Utilize and manage security technologies including:
• Firewalls
• Intrusion Detection/Prevention Systems (IDS/IPS)
• Endpoint protection
• Data Loss Prevention (DLP)
• SIEM systems
• Log aggregation tools
• Support the deployment and operational use of Governance, Risk, and Compliance (GRC) platforms.
• Work with cross-functional teams (e.g., Engineering, QA, IT) and vendors to document and implement cybersecurity controls to achieve program requirements while enabling business outcomes.
• Subject Matter Expertise on security projects to ensure the timely, on-budget, and effective implementation of cyber security improvements that are operationally supported with validation methods in place to measure effectiveness.

Key Requirements and Technology Experience:

• Experience with secure coding practices and encryption technologies.
• Minimum 5 years of experience (less experience may be considered if candidate demonstrates strong practical cybersecurity skills)
• Strong cybersecurity background including:
• Risk assessments
• Vulnerability management
• Strong stakeholder management and influencing skills
• Ability to respond quickly to incidents while remaining calm and controlled
• Bachelor’s degree (Engineering, Cybersecurity, or related field preferred)
• GICSP – Global Industrial Cyber Security Professional
• CISSP – Certified Information Systems Security Professional
• Familiarity with NIST cybersecurity framework
• Manufacturing cybersecurity environments
• Medical device or pharmaceutical industry (preferred but not mandatory)
• Calm and effective under pressure during security incidents
• Strong communication and persuasion skills
• Ability to influence stakeholders without direct authority
• Pragmatic approach to security solutions balancing cyber protection and operational continuity
• Bachelor’s degree in Computer Science, Engineering, Information Security, or related field.
• 5 years of experience in cybersecurity, preferably in regulated industries such as food, beverage, healthcare, or medical devices.
• Experience with cloud security, network protocols (SSL/TLS, VPNs, IPsec), and secure cloud-based applications.
• Familiarity with regulatory compliance (SOX, HIPAA, GDPR, FDA cybersecurity guidance)
• Proficiency in threat modeling, risk management, vulnerability management, and incident response.
• Experience securing both software and hardware systems in manufacturing environments.
• Strong understanding of cybersecurity frameworks (ISO 27001, NIST, SOC 2, HITRUST, NIST SP 800-82).
• CISSP, CISM, or equivalent certification preferred.

Our client is a leading Healthcare Industry and we are currently interviewing to fill this and other similar contract positions. If you are interested in this position, please apply online for immediate consideration.

Pyramid Consulting, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

By applying to our jobs you agree to receive calls, AI-generated calls, text messages, or emails from Pyramid Consulting, Inc. and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here.