✓ Engineering ✕ Clear
Engineering Jobs in Proctor Arkansas
12 positions found
Industrial Engineer
✦ New
Salary not disclosed
JOB SUMMARY
Industrial Engineer I will support the Industrial Engineering Department in planning, designing, implementing and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site.
Main focus: conducts studies to determine the most efficient sequence of operations and workflow and recommends methods for maximum utilization of production equipment and personnel.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Monitor and continuously improve daily quality/efficiency performance for assigned areas.
· Design and procure production tooling, processing equipment and workstations.
· Coordinate layout and workstation move activities.
· Prepares time estimates for proposed projects and evaluates time factors.
· Minimize change over time by ensuring programs use common set-ups where possible.
· Verify that machine maintenance is being performed on schedule.
· Reduce machine-generated scrap by monitoring machine management data and taking corrective action to improve or correct the operations.
· Reduce manual assembly scrap by monitoring quality data and taking corrective action to improve or correct the operations.
· Analyzes work force utilization, facility layout, and operational data such as production costs, process flow charts, and production schedules, to determine efficient utilization of workers and equipment.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Key Requirements:
o Understanding and application of broad range of industrial engineering tools (ie. Work measurement, process mapping, facilities and workstation design, etc.)
o Understanding of Jabil's global strategies and direction
o Understanding of site's facilities, capabilities and how they tie back to the Jabil strategies and direction
o Strong analytical ability
o Able to implement continuous improvements and cost reduction programs
o Good communication skills
· Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.
Industrial Engineer I will support the Industrial Engineering Department in planning, designing, implementing and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site.
Main focus: conducts studies to determine the most efficient sequence of operations and workflow and recommends methods for maximum utilization of production equipment and personnel.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Monitor and continuously improve daily quality/efficiency performance for assigned areas.
· Design and procure production tooling, processing equipment and workstations.
· Coordinate layout and workstation move activities.
· Prepares time estimates for proposed projects and evaluates time factors.
· Minimize change over time by ensuring programs use common set-ups where possible.
· Verify that machine maintenance is being performed on schedule.
· Reduce machine-generated scrap by monitoring machine management data and taking corrective action to improve or correct the operations.
· Reduce manual assembly scrap by monitoring quality data and taking corrective action to improve or correct the operations.
· Analyzes work force utilization, facility layout, and operational data such as production costs, process flow charts, and production schedules, to determine efficient utilization of workers and equipment.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Key Requirements:
o Understanding and application of broad range of industrial engineering tools (ie. Work measurement, process mapping, facilities and workstation design, etc.)
o Understanding of Jabil's global strategies and direction
o Understanding of site's facilities, capabilities and how they tie back to the Jabil strategies and direction
o Strong analytical ability
o Able to implement continuous improvements and cost reduction programs
o Good communication skills
· Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.
permanent
Test Engineer
🏢 JABIL CIRCUIT, INC
Salary not disclosed
SUMMARY
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· May provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university preferred; or related experience and/or training; or equivalent combination of education and experience.
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· May provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university preferred; or related experience and/or training; or equivalent combination of education and experience.
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.
permanent
Industrial Engineer - Focus on continuous improvement and efficiency (MEMPHIS)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
JOB SUMMARY
Industrial Engineer I will support the Industrial Engineering Department in planning, designing, implementing and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site.
Main focus: conducts studies to determine the most efficient sequence of operations and workflow and recommends methods for maximum utilization of production equipment and personnel.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Monitor and continuously improve daily quality/efficiency performance for assigned areas.
· Design and procure production tooling, processing equipment and workstations.
· Coordinate layout and workstation move activities.
· Prepares time estimates for proposed projects and evaluates time factors.
· Minimize change over time by ensuring programs use common set-ups where possible.
· Verify that machine maintenance is being performed on schedule.
· Reduce machine-generated scrap by monitoring machine management data and taking corrective action to improve or correct the operations.
· Reduce manual assembly scrap by monitoring quality data and taking corrective action to improve or correct the operations.
· Analyzes work force utilization, facility layout, and operational data such as production costs, process flow charts, and production schedules, to determine efficient utilization of workers and equipment.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Key Requirements:
o Understanding and application of broad range of industrial engineering tools (ie. Work measurement, process mapping, facilities and workstation design, etc.)
o Understanding of Jabil’s global strategies and direction
o Understanding of site’s facilities, capabilities and how they tie back to the Jabil strategies and direction
o Strong analytical ability
o Able to implement continuous improvements and cost reduction programs
o Good communication skills
· Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.
Industrial Engineer I will support the Industrial Engineering Department in planning, designing, implementing and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site.
Main focus: conducts studies to determine the most efficient sequence of operations and workflow and recommends methods for maximum utilization of production equipment and personnel.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Monitor and continuously improve daily quality/efficiency performance for assigned areas.
· Design and procure production tooling, processing equipment and workstations.
· Coordinate layout and workstation move activities.
· Prepares time estimates for proposed projects and evaluates time factors.
· Minimize change over time by ensuring programs use common set-ups where possible.
· Verify that machine maintenance is being performed on schedule.
· Reduce machine-generated scrap by monitoring machine management data and taking corrective action to improve or correct the operations.
· Reduce manual assembly scrap by monitoring quality data and taking corrective action to improve or correct the operations.
· Analyzes work force utilization, facility layout, and operational data such as production costs, process flow charts, and production schedules, to determine efficient utilization of workers and equipment.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Key Requirements:
o Understanding and application of broad range of industrial engineering tools (ie. Work measurement, process mapping, facilities and workstation design, etc.)
o Understanding of Jabil’s global strategies and direction
o Understanding of site’s facilities, capabilities and how they tie back to the Jabil strategies and direction
o Strong analytical ability
o Able to implement continuous improvements and cost reduction programs
o Good communication skills
· Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.
temporary
Supplier Quality Engineer (MEMPHIS)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
How Will You Make An Impact?
To be a technical focal point to monitor and work supplier quality issues directly with the manufacturer and communicate status on non-conforming parts/suppliers across all programs. Evaluate supplier performance, determine appropriate Inspection processes and provides guidance to Receiving Inspection function at the site level.
Location:
This role will be based on-site at our Memphis, TN facility.
What Will You Do?
- Serve as the focal person for commodity related quality and functional issues that stem from components being purchased for manufacturing.
- Ensure that all production critical supplier issues are resolved in a timely manner, and corrective actions are implemented correctly.
- Serve as the point of contact for Inspection Plans and Inspection Methods, and provide guidance to Receiving Inspection Auditors.
- Ensuring ongoing site supplier evaluation is performed; This would be achieved by using site information collected from Receiving Inspection, MRB, Customer Returns, SCAR database and by liaison efforts with customer work cells.
- Performance will be reported internally, to the supplier, and to the customer where applicable.
- Perform supplier audit interfacing with Corporate SQE if applicable.
- To provide documentation to perform Inspection of components per Inspection Plans in SAP.
- Monitor and drive PPM issues with the supply base in addition to helping them achieve “Dock to Stock” certified with Jabil (in accordance to the vendor performance system).
- Drive supplier selection strategies that will yield a supply base that can be used across all customer programs providing leverage cost savings.
- Proactively communicate information or issues that may impact the product costs of manufacturability to all affected departments.
- Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
- Comply and follow all procedures within the company security policy.
How Will You Get Here?
Education:
- Bachelor’s degree in Industrial Engineering or related field preferred.
Experience:
- 0-2+ years of experience in Quality or Manufacturing Engineering.
- Or an equivalent combination of education, experience, and/or training.
What Can Jabil Offer You?
Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:
- Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
- 401K Match
- Employee Stock Purchase Plan
- Paid Time Off
- Tuition Reimbursement
- Life, AD&D, and Disability Insurance
- Commuter Benefits
- Employee Assistance Program
- Pet Insurance
- Adoption Assistance
- Annual Merit Increases
- Community Volunteer Opportunities
To be a technical focal point to monitor and work supplier quality issues directly with the manufacturer and communicate status on non-conforming parts/suppliers across all programs. Evaluate supplier performance, determine appropriate Inspection processes and provides guidance to Receiving Inspection function at the site level.
Location:
This role will be based on-site at our Memphis, TN facility.
What Will You Do?
- Serve as the focal person for commodity related quality and functional issues that stem from components being purchased for manufacturing.
- Ensure that all production critical supplier issues are resolved in a timely manner, and corrective actions are implemented correctly.
- Serve as the point of contact for Inspection Plans and Inspection Methods, and provide guidance to Receiving Inspection Auditors.
- Ensuring ongoing site supplier evaluation is performed; This would be achieved by using site information collected from Receiving Inspection, MRB, Customer Returns, SCAR database and by liaison efforts with customer work cells.
- Performance will be reported internally, to the supplier, and to the customer where applicable.
- Perform supplier audit interfacing with Corporate SQE if applicable.
- To provide documentation to perform Inspection of components per Inspection Plans in SAP.
- Monitor and drive PPM issues with the supply base in addition to helping them achieve “Dock to Stock” certified with Jabil (in accordance to the vendor performance system).
- Drive supplier selection strategies that will yield a supply base that can be used across all customer programs providing leverage cost savings.
- Proactively communicate information or issues that may impact the product costs of manufacturability to all affected departments.
- Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
- Comply and follow all procedures within the company security policy.
How Will You Get Here?
Education:
- Bachelor’s degree in Industrial Engineering or related field preferred.
Experience:
- 0-2+ years of experience in Quality or Manufacturing Engineering.
- Or an equivalent combination of education, experience, and/or training.
What Can Jabil Offer You?
Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:
- Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
- 401K Match
- Employee Stock Purchase Plan
- Paid Time Off
- Tuition Reimbursement
- Life, AD&D, and Disability Insurance
- Commuter Benefits
- Employee Assistance Program
- Pet Insurance
- Adoption Assistance
- Annual Merit Increases
- Community Volunteer Opportunities
temporary
Test Engineer (MEMPHIS)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
SUMMARY
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· May provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university preferred; or related experience and/or training; or equivalent combination of education and experience.
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· May provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university preferred; or related experience and/or training; or equivalent combination of education and experience.
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.
temporary
Test Engineer - Specializes in advanced electronics testing solutions (MEMPHIS)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
SUMMARY
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· May provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university preferred; or related experience and/or training; or equivalent combination of education and experience.
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· May provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university preferred; or related experience and/or training; or equivalent combination of education and experience.
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.
temporary
Supplier Quality Engineer - Hands-on technical leadership at the site level (MEMPHIS)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
How Will You Make An Impact?
To be a technical focal point to monitor and work supplier quality issues directly with the manufacturer and communicate status on non-conforming parts/suppliers across all programs. Evaluate supplier performance, determine appropriate Inspection processes and provides guidance to Receiving Inspection function at the site level.
Location:
This role will be based on-site at our Memphis, TN facility.
What Will You Do?
- Serve as the focal person for commodity related quality and functional issues that stem from components being purchased for manufacturing.
- Ensure that all production critical supplier issues are resolved in a timely manner, and corrective actions are implemented correctly.
- Serve as the point of contact for Inspection Plans and Inspection Methods, and provide guidance to Receiving Inspection Auditors.
- Ensuring ongoing site supplier evaluation is performed; This would be achieved by using site information collected from Receiving Inspection, MRB, Customer Returns, SCAR database and by liaison efforts with customer work cells.
- Performance will be reported internally, to the supplier, and to the customer where applicable.
- Perform supplier audit interfacing with Corporate SQE if applicable.
- To provide documentation to perform Inspection of components per Inspection Plans in SAP.
- Monitor and drive PPM issues with the supply base in addition to helping them achieve “Dock to Stock” certified with Jabil (in accordance to the vendor performance system).
- Drive supplier selection strategies that will yield a supply base that can be used across all customer programs providing leverage cost savings.
- Proactively communicate information or issues that may impact the product costs of manufacturability to all affected departments.
- Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
- Comply and follow all procedures within the company security policy.
How Will You Get Here?
Education:
- Bachelor’s degree in Industrial Engineering or related field preferred.
Experience:
- 0-2+ years of experience in Quality or Manufacturing Engineering.
- Or an equivalent combination of education, experience, and/or training.
What Can Jabil Offer You?
Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:
- Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
- 401K Match
- Employee Stock Purchase Plan
- Paid Time Off
- Tuition Reimbursement
- Life, AD&D, and Disability Insurance
- Commuter Benefits
- Employee Assistance Program
- Pet Insurance
- Adoption Assistance
- Annual Merit Increases
- Community Volunteer Opportunities
To be a technical focal point to monitor and work supplier quality issues directly with the manufacturer and communicate status on non-conforming parts/suppliers across all programs. Evaluate supplier performance, determine appropriate Inspection processes and provides guidance to Receiving Inspection function at the site level.
Location:
This role will be based on-site at our Memphis, TN facility.
What Will You Do?
- Serve as the focal person for commodity related quality and functional issues that stem from components being purchased for manufacturing.
- Ensure that all production critical supplier issues are resolved in a timely manner, and corrective actions are implemented correctly.
- Serve as the point of contact for Inspection Plans and Inspection Methods, and provide guidance to Receiving Inspection Auditors.
- Ensuring ongoing site supplier evaluation is performed; This would be achieved by using site information collected from Receiving Inspection, MRB, Customer Returns, SCAR database and by liaison efforts with customer work cells.
- Performance will be reported internally, to the supplier, and to the customer where applicable.
- Perform supplier audit interfacing with Corporate SQE if applicable.
- To provide documentation to perform Inspection of components per Inspection Plans in SAP.
- Monitor and drive PPM issues with the supply base in addition to helping them achieve “Dock to Stock” certified with Jabil (in accordance to the vendor performance system).
- Drive supplier selection strategies that will yield a supply base that can be used across all customer programs providing leverage cost savings.
- Proactively communicate information or issues that may impact the product costs of manufacturability to all affected departments.
- Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
- Comply and follow all procedures within the company security policy.
How Will You Get Here?
Education:
- Bachelor’s degree in Industrial Engineering or related field preferred.
Experience:
- 0-2+ years of experience in Quality or Manufacturing Engineering.
- Or an equivalent combination of education, experience, and/or training.
What Can Jabil Offer You?
Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:
- Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
- 401K Match
- Employee Stock Purchase Plan
- Paid Time Off
- Tuition Reimbursement
- Life, AD&D, and Disability Insurance
- Commuter Benefits
- Employee Assistance Program
- Pet Insurance
- Adoption Assistance
- Annual Merit Increases
- Community Volunteer Opportunities
temporary
Supplier Quality Engineer
🏢 JABIL CIRCUIT, INC
Salary not disclosed
How Will You Make An Impact?
To be a technical focal point to monitor and work supplier quality issues directly with the manufacturer and communicate status on non-conforming parts/suppliers across all programs. Evaluate supplier performance, determine appropriate Inspection processes and provides guidance to Receiving Inspection function at the site level.
Location:
This role will be based on-site at our Memphis, TN facility.
What Will You Do?
- Serve as the focal person for commodity related quality and functional issues that stem from components being purchased for manufacturing.
- Ensure that all production critical supplier issues are resolved in a timely manner, and corrective actions are implemented correctly.
- Serve as the point of contact for Inspection Plans and Inspection Methods, and provide guidance to Receiving Inspection Auditors.
- Ensuring ongoing site supplier evaluation is performed; This would be achieved by using site information collected from Receiving Inspection, MRB, Customer Returns, SCAR database and by liaison efforts with customer work cells.
- Performance will be reported internally, to the supplier, and to the customer where applicable.
- Perform supplier audit interfacing with Corporate SQE if applicable.
- To provide documentation to perform Inspection of components per Inspection Plans in SAP.
- Monitor and drive PPM issues with the supply base in addition to helping them achieve “Dock to Stock” certified with Jabil (in accordance to the vendor performance system).
- Drive supplier selection strategies that will yield a supply base that can be used across all customer programs providing leverage cost savings.
- Proactively communicate information or issues that may impact the product costs of manufacturability to all affected departments.
- Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
- Comply and follow all procedures within the company security policy.
How Will You Get Here?
Education:
- Bachelor’s degree in Industrial Engineering or related field preferred.
Experience:
- 0-2+ years of experience in Quality or Manufacturing Engineering.
- Or an equivalent combination of education, experience, and/or training.
What Can Jabil Offer You?
Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:
- Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
- 401K Match
- Employee Stock Purchase Plan
- Paid Time Off
- Tuition Reimbursement
- Life, AD&D, and Disability Insurance
- Commuter Benefits
- Employee Assistance Program
- Pet Insurance
- Adoption Assistance
- Annual Merit Increases
- Community Volunteer Opportunities
To be a technical focal point to monitor and work supplier quality issues directly with the manufacturer and communicate status on non-conforming parts/suppliers across all programs. Evaluate supplier performance, determine appropriate Inspection processes and provides guidance to Receiving Inspection function at the site level.
Location:
This role will be based on-site at our Memphis, TN facility.
What Will You Do?
- Serve as the focal person for commodity related quality and functional issues that stem from components being purchased for manufacturing.
- Ensure that all production critical supplier issues are resolved in a timely manner, and corrective actions are implemented correctly.
- Serve as the point of contact for Inspection Plans and Inspection Methods, and provide guidance to Receiving Inspection Auditors.
- Ensuring ongoing site supplier evaluation is performed; This would be achieved by using site information collected from Receiving Inspection, MRB, Customer Returns, SCAR database and by liaison efforts with customer work cells.
- Performance will be reported internally, to the supplier, and to the customer where applicable.
- Perform supplier audit interfacing with Corporate SQE if applicable.
- To provide documentation to perform Inspection of components per Inspection Plans in SAP.
- Monitor and drive PPM issues with the supply base in addition to helping them achieve “Dock to Stock” certified with Jabil (in accordance to the vendor performance system).
- Drive supplier selection strategies that will yield a supply base that can be used across all customer programs providing leverage cost savings.
- Proactively communicate information or issues that may impact the product costs of manufacturability to all affected departments.
- Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
- Comply and follow all procedures within the company security policy.
How Will You Get Here?
Education:
- Bachelor’s degree in Industrial Engineering or related field preferred.
Experience:
- 0-2+ years of experience in Quality or Manufacturing Engineering.
- Or an equivalent combination of education, experience, and/or training.
What Can Jabil Offer You?
Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:
- Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
- 401K Match
- Employee Stock Purchase Plan
- Paid Time Off
- Tuition Reimbursement
- Life, AD&D, and Disability Insurance
- Commuter Benefits
- Employee Assistance Program
- Pet Insurance
- Adoption Assistance
- Annual Merit Increases
- Community Volunteer Opportunities
permanent
Maintenance Engineering
🏢 JABIL CIRCUIT, INC
$55,900 - 89,400
JOB SUMMARY
Industrial Engineer I will support the Industrial Engineering Department in planning, designing, implementing and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site.
Main focus: conducts studies to determine the most efficient sequence of operations and workflow and recommends methods for maximum utilization of production equipment and personnel.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Monitor and continuously improve daily quality/efficiency performance for assigned areas.
· Design and procure production tooling, processing equipment and workstations.
· Coordinate layout and workstation move activities.
· Prepares time estimates for proposed projects and evaluates time factors.
· Minimize change over time by ensuring programs use common set-ups where possible.
· Verify that machine maintenance is being performed on schedule.
· Reduce machine-generated scrap by monitoring machine management data and taking corrective action to improve or correct the operations.
· Reduce manual assembly scrap by monitoring quality data and taking corrective action to improve or correct the operations.
· Analyzes work force utilization, facility layout, and operational data such as production costs, process flow charts, and production schedules, to determine efficient utilization of workers and equipment.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Key Requirements:
o Understanding and application of broad range of industrial engineering tools (ie. Work measurement, process mapping, facilities and workstation design, etc.)
o Understanding of Jabil’s global strategies and direction
o Understanding of site’s facilities, capabilities and how they tie back to the Jabil strategies and direction
o Strong analytical ability
o Able to implement continuous improvements and cost reduction programs
o Good communication skills
· Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.
Industrial Engineer I will support the Industrial Engineering Department in planning, designing, implementing and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site.
Main focus: conducts studies to determine the most efficient sequence of operations and workflow and recommends methods for maximum utilization of production equipment and personnel.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Monitor and continuously improve daily quality/efficiency performance for assigned areas.
· Design and procure production tooling, processing equipment and workstations.
· Coordinate layout and workstation move activities.
· Prepares time estimates for proposed projects and evaluates time factors.
· Minimize change over time by ensuring programs use common set-ups where possible.
· Verify that machine maintenance is being performed on schedule.
· Reduce machine-generated scrap by monitoring machine management data and taking corrective action to improve or correct the operations.
· Reduce manual assembly scrap by monitoring quality data and taking corrective action to improve or correct the operations.
· Analyzes work force utilization, facility layout, and operational data such as production costs, process flow charts, and production schedules, to determine efficient utilization of workers and equipment.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Key Requirements:
o Understanding and application of broad range of industrial engineering tools (ie. Work measurement, process mapping, facilities and workstation design, etc.)
o Understanding of Jabil’s global strategies and direction
o Understanding of site’s facilities, capabilities and how they tie back to the Jabil strategies and direction
o Strong analytical ability
o Able to implement continuous improvements and cost reduction programs
o Good communication skills
· Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.
temporary
Maintenance & Engineering Manage
🏢 JABIL CIRCUIT, INC
$55,900 - 89,400
JOB SUMMARY
Industrial Engineer I will support the Industrial Engineering Department in planning, designing, implementing and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site.
Main focus: conducts studies to determine the most efficient sequence of operations and workflow and recommends methods for maximum utilization of production equipment and personnel.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Monitor and continuously improve daily quality/efficiency performance for assigned areas.
· Design and procure production tooling, processing equipment and workstations.
· Coordinate layout and workstation move activities.
· Prepares time estimates for proposed projects and evaluates time factors.
· Minimize change over time by ensuring programs use common set-ups where possible.
· Verify that machine maintenance is being performed on schedule.
· Reduce machine-generated scrap by monitoring machine management data and taking corrective action to improve or correct the operations.
· Reduce manual assembly scrap by monitoring quality data and taking corrective action to improve or correct the operations.
· Analyzes work force utilization, facility layout, and operational data such as production costs, process flow charts, and production schedules, to determine efficient utilization of workers and equipment.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Key Requirements:
o Understanding and application of broad range of industrial engineering tools (ie. Work measurement, process mapping, facilities and workstation design, etc.)
o Understanding of Jabil’s global strategies and direction
o Understanding of site’s facilities, capabilities and how they tie back to the Jabil strategies and direction
o Strong analytical ability
o Able to implement continuous improvements and cost reduction programs
o Good communication skills
· Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.
Industrial Engineer I will support the Industrial Engineering Department in planning, designing, implementing and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site.
Main focus: conducts studies to determine the most efficient sequence of operations and workflow and recommends methods for maximum utilization of production equipment and personnel.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Monitor and continuously improve daily quality/efficiency performance for assigned areas.
· Design and procure production tooling, processing equipment and workstations.
· Coordinate layout and workstation move activities.
· Prepares time estimates for proposed projects and evaluates time factors.
· Minimize change over time by ensuring programs use common set-ups where possible.
· Verify that machine maintenance is being performed on schedule.
· Reduce machine-generated scrap by monitoring machine management data and taking corrective action to improve or correct the operations.
· Reduce manual assembly scrap by monitoring quality data and taking corrective action to improve or correct the operations.
· Analyzes work force utilization, facility layout, and operational data such as production costs, process flow charts, and production schedules, to determine efficient utilization of workers and equipment.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Key Requirements:
o Understanding and application of broad range of industrial engineering tools (ie. Work measurement, process mapping, facilities and workstation design, etc.)
o Understanding of Jabil’s global strategies and direction
o Understanding of site’s facilities, capabilities and how they tie back to the Jabil strategies and direction
o Strong analytical ability
o Able to implement continuous improvements and cost reduction programs
o Good communication skills
· Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.
temporary
Quality Engineering and Assurance
🏢 JABIL CIRCUIT, INC
$55,900 - 89,400
SUMMARY
To assist the Quality Assurance function as technical support in issues affecting manufacturing. To support and drive corrective action efforts.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
· Ensure capability studies are performed on critical processes.
· Perform first article inspection and review visual aids.
· Perform defect analysis reporting.
· Perform MRB on sustained products.
· Participate in CAC meetings – support continuous improvement.
· Perform line and product audits.
· Assist Quality Engineering in APQP.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelor's degree preferred; or equivalent combination of education and experience.
To assist the Quality Assurance function as technical support in issues affecting manufacturing. To support and drive corrective action efforts.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
· Ensure capability studies are performed on critical processes.
· Perform first article inspection and review visual aids.
· Perform defect analysis reporting.
· Perform MRB on sustained products.
· Participate in CAC meetings – support continuous improvement.
· Perform line and product audits.
· Assist Quality Engineering in APQP.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelor's degree preferred; or equivalent combination of education and experience.
temporary
Quality Engineering & Assurance
🏢 JABIL CIRCUIT, INC
$55,900 - 89,400
SUMMARY
To assist the Quality Assurance function as technical support in issues affecting manufacturing. To support and drive corrective action efforts.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
· Ensure capability studies are performed on critical processes.
· Perform first article inspection and review visual aids.
· Perform defect analysis reporting.
· Perform MRB on sustained products.
· Participate in CAC meetings – support continuous improvement.
· Perform line and product audits.
· Assist Quality Engineering in APQP.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelor's degree preferred; or equivalent combination of education and experience.
To assist the Quality Assurance function as technical support in issues affecting manufacturing. To support and drive corrective action efforts.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
· Ensure capability studies are performed on critical processes.
· Perform first article inspection and review visual aids.
· Perform defect analysis reporting.
· Perform MRB on sustained products.
· Participate in CAC meetings – support continuous improvement.
· Perform line and product audits.
· Assist Quality Engineering in APQP.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelor's degree preferred; or equivalent combination of education and experience.
temporary
jobs by
