Jobs in Kent, WA
257 positions found — Page 10
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington.
As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks. This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements. You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank. Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications. Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies.
Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.
Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers.
Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.
Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications.
Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations.
Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments.
Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications.
Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications.
Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments.
Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors.
Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required.
Use precision measuring instruments to verify that quality standards are achieved.
Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures.
Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration.
Basic Qualifications (Required Skills/Experience):
1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military.
1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions.
1+ years of experience using high impact vibratory tools; such as bucking/riveting.
Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals.
Ability to lift up to 35lbs.
Ability to work in Confined Spaces (work within or pass through). Entry diameter 9.5”X17.7”.
Proficiency in reading, writing, and speaking English.
Preferred Qualifications:
1+ years of experience performing aircraft structural work or equivalate.
Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
This position offers relocation based on candidate eligibility.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift:
This position is for a variety of shifts.
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Apr. 10, 2026
Language Requirements
English Preferred
Relocation
This position offers relocation based on candidate eligibility.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Electronic Technician - Precision Machine Tool Maintenance to join our Equipment Services team in various locations across Washington State.
As an Electronic Technician specializing in Precision Machine Tool Maintenance, your role will involve the installation, maintenance, and troubleshooting of electronic and electrical systems in precision machine tools, where attention to detail and adherence to safety protocols are paramount. You will be responsible for diagnosing and resolving issues in complex systems, ensuring that all equipment operates efficiently and meets stringent specifications. Your commitment to quality will be reflected in your ability to collaborate with various teams, maintain accurate records, and comply with all regulatory requirements.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
- Install, maintain, troubleshoot, repair, and rework electronic and associated electrical systems of precision machine tools and other manufacturing equipment, ensuring compliance with original equipment manufacturer specifications.
- Troubleshoot communication protocols to facilitate the transmission and receipt of information between various machine tool and production systems.
- Utilize open computing architecture to diagnose issues in integrated machine tool and production systems, determining appropriate repair actions.
- Write and edit programs to support maintenance activities, including alignments and ballbars, using knowledge of high-level programming languages.
- Develop test programs and loops to troubleshoot equipment movement for repeatability and accuracy.
- Comply with all Federal, State, and Company regulations while performing duties.
- Collaborate with other crafts to assist in troubleshooting outside the central control system as needed.
- Diagnose malfunctions in systems and components, determining corrective actions to restore optimal operating efficiency.
- Communicate relevant information to succeeding shifts using management-approved methods.
- Work with lower-classification employees on maintenance, installation, repair, retrofit, modification, calibration, adjustment, and testing of precision machine tools and subsystems.
- Maintain equipment records, logs, and updates, preparing reports and schedules as required.
- Plan jobs by coordinating equipment, tools, drawings, and procedures to facilitate job completion.
- Ensure system configurations comply with FAA and accreditation requirements.
- Possess working knowledge of software programming languages (e.g., Boolean, ladder, C+, C++) and numbering systems (binary, octal, hexadecimal).
- Understand electronic theory, computer and networking architecture, microprocessors, and discrete components.
- Use various computing systems and test equipment (e.g., oscilloscopes, meters, laser interferometers, ballbars) to test and adjust electronic components and systems.
- Collaborate with Management, Engineering, Equipment Manufacturers, and Vendors to analyze and recommend improvements for facility and equipment design.
- Maintain and utilize schematics, blueprints, wiring diagrams, technical documents, and applicable specifications and codes.
- Develop and use electronic, electrical, and electromechanical test equipment and measuring devices as required.
- Perform tasks associated with other job classifications when necessary to complete assignments.
- Obtain and maintain applicable licenses, certificates, and certifications.
- Troubleshoot and maintain electronic control devices, spindle systems, sensors, servo systems, PID loops, transducers, feedback technologies, magnetic devices, and electrostatic discharge systems.
- Repair digital electronics, serial/parallel bus transmission systems, high-frequency circuitry, analog devices, and printed circuit boards.
Physical Demands and Potential Hazards:
- Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.
- Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
- Work in environments that may involve contact with metals, solvents, and coolants.
- Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
- Adapt to varying noise levels and atmospheric conditions.
- Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.62 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).
Basic Qualifications:
- 3+ years of electronic/electrical experience in any of the following fields: machine tool maintenance, industrial electronic and/or electrical maintenance field, or military electronic/electrical system maintenance.
- 1+ years' experience troubleshooting programmable logic controllers (PLC) OR Functionally Equivalent Control Systems, such as related fields including military, shipboard, aircraft support, weapons systems, or industrial automation platforms.
- Ability to work at heights up to 125 feet above ground level and pass Fall Protection Training.
Preferred Qualifications:
- Experience working in manufacturing or industrial setting maintaining and troubleshooting equipment.
- Experience reading and interpreting drawings, specifications, material processes, schematic and diagrams.
- Experience working around 3 phase, industrial voltages 480v, 277v, 208v.
- Ability to work around electromagnetic fields as a result of various types of production equipment.
Conflict of Interest:
Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
- This position offers relocation based on candidate eligibility.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
- This position is for a variety of shifts. Working in other shifts and/or overtime varies based on business needs.
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $47.00/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Mar. 30, 2026
Language Requirements
English Preferred
Relocation
This position offers relocation based on candidate eligibility.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Integral Fuel Cells to join our Quality team in Everett and Renton, Washington.
As an Inspector for Integral Fuel Cells, you will be crucial in maintaining the integrity and safety of our aircraft operations. This position requires working in confined spaces within the wing fuel cells, where employees must crawl through an opening of 9.5” x 17.7" to access the fuel cell. Your expertise will be vital in inspecting the cleaning, sealing, and coating processes, as well as conducting thorough leak checks to identify and resolve any issues. Collaborating closely with Engineering, Quality, and Manufacturing teams, you will implement improvements in build processes and drive initiatives for defect reduction. Certification for visual acuity and color perception may also be required. Your ability to use precision measuring instruments and interpret technical documentation will ensure that all components meet stringent specifications, allowing you to make a significant impact on our operations.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells.
Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required.
Inspect final assemblies, subassemblies, and installations of parts and systems for workmanship, fit, alignment, and conformance with applicable drawings and specifications.
Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives.
Initiate and document any nonconforming materials or assemblies according to specifications and procedures.
Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance.
Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements.
Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies.
Perform in-process inspections, including checks for torque, sealant applications, and electrical bonding.
Document any discrepancies and report them to the appropriate personnel for resolution.
Verify that parts and assemblies have been properly cleaned and that sealants, primers, and finishes are applied per specifications.
Witness and document functional tests of aircraft components and systems to detect leaks.
Perform shakedown inspections on completed assemblies prior to customer acceptance, documenting any discrepancies.
Maintain personal and tool certifications, ensuring compliance with operational standards.
Assist and train other employees on inspection methods and procedures, providing guidance as needed.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.62 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications:
2+ years of experience as a Quality Inspector or in a related inspection role within a similar industry, such as, but not limited to, Aerospace and Manufacturing.
Ability to work in confined spaces (work within or pass through). Entry diameter 9.5”X17.7”.
Ability to complete Fall Protection Training.
Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.
Ability to use a respirator or have been respirator certified.
Proficiency in reading, writing, and speaking English.
Preferred Qualifications:
Experience working with precision measuring tools.
Experience sealing
Conflict of Interest:
Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
This position is for a variety of shifts.
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $27.32/hour, with potential to earn up to $57.88/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Aug. 31, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Electrical Systems- Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.
We are seeking a skilled Aircraft Electrical Systems Installer to join our dynamic team. In this role, you will be responsible for assembling and installing aircraft electrical systems, equipment, and accessories to meet stringent quality requirements. Your expertise will ensure that all electrical components are accurately located and installed, contributing to the overall safety and performance of our aircraft.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities
Assemble and install aircraft electrical systems, equipment, and accessories in the airplane and/or specific sections, adhering to quality requirements.
Locate points, parts, holes, wire bundles, assemblies, etc., using previously established, marked, or generally known station lines or index points, deriving measurements and related information from electrical specifications and authorized sources.
Conduct continuity checks to ensure proper functionality of electrical systems.
Utilize prints, changes, schematic drawings, documents, position boards, assembly pages, photographs, makeup charts, work orders, and production illustrations to complete assigned tasks.
Execute any necessary pickups, authorized changes, and rework independently or on comparable work, often without the use of wire forming boards, jigs, fixtures, or tooling. Typically assigned work that has been previously sequenced.
Select appropriate parts, materials, tools, assemblies, and shields to effectively accomplish work assignments.
Report job handicaps, such as errors in sequencing, parts, materials, wire sizes and types, and assembly procedures, in accordance with shop procedures outlined by the supervisor.
Perform hand forming of electrical wiring and soldering as required to complete work assignments.
Carry out mechanical work when it is similar in complexity and incidental but necessary for the efficient completion of work assignments.
Execute necessary riveting tasks as part of the assembly process.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications
1+ years of experience in electrical assembly installation.
1+ years of experience with safety process and/or procedures in a manufacturing or operations environment (LOTO).
1+ years of experience handling chemicals and/or hazardous materials.
Ability to recognize colors.
Ability to work in confined spaces.
Ability to support frequent standing, walking, lifting, and working at heights with or without equipment assistance.
Proficiency in reading, writing, and speaking English.
Preferred Qualifications:
1+ years of experience as an Electrician or Apprentice.
Completion of an electrical trade school program or have military related electrical experience.
Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
This position is for a variety of shifts
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Jul. 09, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes (BCA) is seeking Senior Assembly Advisement Workplace Coaches (Level 4) to join 737 Skill Enhancement Center team located in Renton, Washington.
Position Responsibilities:
Uses manufacturing and assembly experience in one or more of these areas: mechanical, fluids/pneumatics, electrical integration, quality inspection, machine operations for coaching, performance improvement and problem solving in support of the Boeing Production System
Analyze and interpret performance and quality data to identify and mitigate the impact of changes on the production system. (e.g. CMES, CORRS, PAS, EPES, TMC, Velocity, Webart)
Conduct assessments of processes and practices, analyzes and interprets data for improvement opportunities
Provide feedback on assessment results and find opportunities for improvement and potential areas of risk
Analyze processes and support Boeing Production System problem solving, develop and document innovative solutions in support of area Q.C.D.S.M. goals
Assist M&Q managers and team leads with Structured On the Job Training (SOJT) plans
Support training and coaching solutions to improve employee performance
Provide Subject Matter Experts for specific M&Q Skills/Disciplines
Provide instruction, positive modeling, and opportunities for observation in order to help team members and employees. Encourage questions to ensure understanding. Gives timely, appropriate feedback on performance when coaching. Reinforces efforts and progress
Clarify expected behavior, knowledge, and level of proficiency by seeking, giving information, and checking for understanding
Establish good interpersonal relationships by helping team members and making internal employees feel valued, appreciated, and included in discussions
Work at the appropriate level in the organization to implement strategies and plans
Self-sufficiency, working under minimal direction
Basic Qualifications (Required Skills/Experience):
5+ years of experience with Structures Assembly, Mechanical Assembly, Electrical Assembly, and/or Final Assembly
10+ years of experience working in a manufacturing environment
Ability to work 2nd shift
Preferred Qualifications (Desired Skills/Experience):
10+ years of experience with aircraft assembly processes, performing hands-on installation and/or assembly is desired (or an equivalent combination of education and experience as outlined above)
Demonstrated knowledge and expertise in aircraft assembly and inspection processes is critical
Experience and proficiency reading and interpreting blueprints, drawings, specifications, and templates
Proficiency with MS Office applications
Excellent analytical, communication, and problem-solving skills
Possess manufacturing experience in one or more of the following areas:
Mechanical
Fluids/Pneumatics
Electrical Integration
Structures
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Shift:
This position is for 2nd shift.
Total Rewards:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range: $112,000 to $135,000
Applications for this position will be accepted until Mar. 20, 2026
Export Control Requirements:
This is not an Export Control position.
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 2nd shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Aircraft Structures Mechanic to join our Join and Installation team in Everett and Renton, Washington.
As an Aircraft Structures Mechanic, you will utilize your manufacturing knowledge to set up tools and equipment for drilling and fastening complex structures, including composite materials. You will operate various hand and machine tools, including automated equipment, to perform tasks according to specifications while ensuring safety and quality standards. Your responsibilities will include recognizing and reporting any equipment malfunctions, performing maintenance, and coordinating the movement of materials and tools. You will also cut, assemble, and install components, verify your work against specifications, and handle hazardous materials safely.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
Review daily reports and consult with team leaders to determine job assignments and obtain necessary documentation.
Locate work areas using specified drawings and paperwork.
Verify kitted parts against installation plans and bill of materials, ensuring they are suitable and defect-free.
Retrieve non-kitted parts from designated areas, ensuring compliance with specifications.
Use electronic devices to access work instructions and engineering data (personal cell phones not permitted).
Select and utilize appropriate hand and power tools for assembly tasks, including precision alignment equipment.
Move kits, carts, and equipment within the work cell as needed.
Load/unload jigs and operate mechanical lifts for assembly work.
Locate tools and parts on aircraft using specified methods and set up assembly tools per instructions.
Handle hazardous materials safely and dispose of them properly.
Inspect completed work for defects and cleanliness before submission for inspection.
Perform minor rework and maintain tool control in accordance with procedures.
Maintain personal and tool certifications and seek assistance from supervisors when necessary.
Set up tools and equipment for drilling and fastener installation in complex structures.
Operate various hand and machine tools, monitoring equipment functionality and performing routine maintenance.
Coordinate the movement and preparation of materials and tools for tasks.
Cut, file, drill, and assemble parts, ensuring proper fitting and quality standards.
Conduct reaming, riveting, and sealing operations, applying corrosion inhibitors as needed.
Utilize calibrated tools to verify work against specifications and ensure quality.
Manage equipment and materials within the work cell to ensure efficient workflow.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration.
Basic Qualifications:
1+ years of experience working with mechanical or structures related statements of work; such as construction, aerospace, automotive, maritime or similar industry; this can include education and military.
1+ year experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, and specifications.
1+ years of experience using high impact vibratory tools; such as bucking/riveting.
Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.
Ability to lift up to 35 pounds.
This positions requires you to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all times.
Proficiency in reading, writing, and speaking English.
Preferred Qualifications:
1+ years of experience performing aircraft structural work or equivalate.
Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
This position offers relocation based on candidate eligibility.
Drug Free Workplace
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
This position is for a variety of shifts
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $25.32/hour, with potential to earn up to $54.76/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Apr. 10, 2026
Language Requirements
English Preferred
Relocation
This position offers relocation based on candidate eligibility.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for a Tool & Die Maker to join our Materials Management & Tooling team in Auburn and Renton, Washington.
In this hands-on position, you will be responsible for a variety of tasks, from interpreting blueprints and work orders to developing effective plans for tool fabrication and repair. Your skills will be essential in troubleshooting production challenges, operating advanced machinery, and ensuring that all tools meet stringent quality standards. Collaborating with cross-functional teams, you will also engage with customers and suppliers to address any functional issues, all while adhering to safety protocols and continuous improvement practices. If you are passionate about precision engineering and ready to make a significant impact in a fast-paced environment, we invite you to explore this exciting opportunity.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
Perform all functions related to tool fabrication, rework, and repair as required.
Obtain work orders from the team leader or supervisor, determining assignments based on schedule dates and tool availability.
Read work orders and blueprints to identify required tasks, tools, and equipment.
Develop plans for the fabrication, maintenance, and repair of tools.
Initiate and coordinate engineering change requests with internal support groups when necessary.
Determine the sequence of tool fabrication work, troubleshoot issues, and develop solutions to production challenges.
Access and utilize appropriate tool drawings, models, and specifications using available computing systems.
Select and verify necessary equipment from the shop storage area, ensuring current tool certification.
Perform repairs or replacements on tools as per Standing Tool Order (STO) Production Requests, and request rework orders if necessary.
Layout holes, lines, and other tool features, and install or modify hydraulic, pneumatic, and vacuum tubes as required.
Operate various machinery, including power saws, drill presses, and CNC machines, to shape materials and prepare details.
Move materials and equipment using Powered Industrial Trucks (PIT) and overhead cranes as needed.
Maintain accurate records of orders and coordinate tooling information with other shifts and departments.
Handle hazardous materials in compliance with Boeing procedures, using appropriate personal protective equipment.
Engage in continuous improvement practices to enhance quality, safety, and efficiency in tool and die work.
Use precision measuring instruments, such as micrometers and gauges, to ensure accuracy in fabrication and repairs.
Interface with customers and suppliers to incorporate changes or resolve functional and installation issues.
Submit completed jobs to Quality Assurance and assist inspectors in performing necessary checks or measurements.
Utilize mathematics, including algebra and trigonometry, to calculate dimensions and analyze Model Based Definition (MBD) for fabrication details.
Conduct tool tryouts and make necessary adjustments to ensure production meets quality requirements and specifications.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).
Basic Qualifications:
5+ years of experience in repairing, maintaining, construction, and/or the inspection of tools, dies, jigs, powerfeed, etc.
5+ years of experience in machine shop processes, geometric dimensioning & tolerances, and machining capabilities of different types of materials.
2+ years of experience using complete set of toolmaker shop equipment (milling, lathe, precision, grinding, polishing, and fitting).
Preferred Qualifications:
5+ years of experience as a Tool & Die Maker.
2+ years of experience with hydraulics and pneumatics.
Completed an approved Mold Maker or Tool and Die Maker state apprentice ship program and/or certified by the U.S.
Ability to perform machining operations with a specified degree of accuracy and within a timely manner, maintain close and exacting tolerances and finish requirements ensuring highest quality workmanship on all tools, gages, and fixtures with minimal scrap.
Capable of creating a repeatable setup and working to tolerances of +/-.0002" in controlled environment.
Possesses 4 and 5 axis CNC skills for mill or lathe, and extensive knowledge of detail cutting tool geometry for different cutting tool types and materials.
Ability to reverse engineer and manufacture mold components within time limitations
Ability to read and write G and M code with CAM programming experience.
Conflict of Interest:
Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
This position offers relocation based on candidate eligibility.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
This position is for a variety of shifts
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $40.00/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Jul. 31, 2026
Language Requirements
English Preferred
Relocation
This position offers relocation based on candidate eligibility.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes (BCA) is looking for Senior Quality Workplace Coaches to join the Composite Manufacturing Center based out of Renton, Washington.
Our team is currently hiring for a broad range of experienced levels, including Experienced and Senior Quality Workplace Coaches.
The QWPC team is looking for enthusiastic Quality Workplace Coaches who are passionate about motivating and inspiring others. In this role, you will support quality inspectors and manage Structured On-The-Job activities. Ideal candidates will be Subject Matter Experts (SMEs) in inspection methods and quality processes, with hands-on experience and proficiency in Non-Conformance Record (NCR) writing. Strong collaboration, coaching, and leadership skills are essential, along with a genuine ability to connect with others. Our motto is, “We Make People Awesome.” We offer a collaborative culture with flexible scheduling, minimal overtime, and lower physical demands.
Position Responsibilities:
Able to coach Quality inspectors on best practices in inspection techniques and performance improvement, utilizing expertise in quality manufacturing and assembly across various areas such as Structures, Seal, Flightline processes, Functional Test, Wings, Interiors, Electrical, WIRS, NCR Tag Writing, Hydraulics, Engines, Paint, Systems, Final Assembly, Plumbing and PDD (including but not limited to REDARS, PSDS, ONEPPPM, D Documents Navigation), to enhance coaching, performance improvement, and problem solving in support of the Boeing Production System
Analyzes and interprets performance and quality data (e.g. CMES, PAS, EPES, TMC) to identify improvement opportunities
Analyzes processes and supports problem solving, develops, communicates and documents innovative solutions in support of area quality goals
Assists Quality managers and team leads with Structured On-the-Job Training (SOJT) plans and provides program/job specific advanced skills coaching
Offers Subject Matter Expertise for specific Quality skills through Workplace Coaching
Provides coaching, positive modeling, and observation opportunities to help team members excel
Encourages questions to ensure understanding and gives timely feedback on performance
Reinforces efforts and progress while clarifying expected behaviors, knowledge, and proficiency levels
Fosters good interpersonal relationships through helping team members feel valued, appreciated and included in discussions
Basic Qualifications (Required Skills/Experience):
5+ years of experience in manufacturing operations, quality, or other related field
5+ years of experience in quality inspection and/or auditing
5+ years of experience working or inspecting non-conformance work orders
2+ years of experience mentoring, coaching, guiding, and leading teams
Preferred Qualifications (Desired Skills/Experience):
10 + years of related work experience or an equivalent combination of education and experience
Quality inspection experience in three or more of these areas: Quality inspection in Structures, Seal, Flightline processes, Functional Test, Wings, Interiors, Electrical, WIRS, NCR Tag Writing, Hydraulics, Engines, Paint, Systems, Final Assembly, Plumbing and PDD (including but not limited to REDARS, PSDS, ONEPPPM, D Documents Navigation), to enhance coaching, performance improvement, and problem solving in support of the Boeing Production System
Proficiency with MS Office applications
Excellent analytical, communication and problem-solving skills
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Shift:
This position is for 1st and/or 2nd shift.
Total Rewards:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary Pay Range:
Experienced (Level 3): $103,000 - $125,000
Senior (Level 4): $126,000 - $154,000
Applications for this position will be accepted until Mar. 20, 2026
Export Control Requirements:
This is not an Export Control position.
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for a Painter Spray B to join our Paint team in the Puget Sound in Washington.
As a Painter Spray B, you will be a key player in our commitment to delivering high-quality finishes on aircraft components. Candidates must have the ability to see color accurately, as your expertise in applying various coatings, including primers and protective finishes, will ensure that every part meets stringent quality standards. You will prepare surfaces meticulously, utilizing your skills to remove corrosion and perform chemical reactivation as needed. Your attention to detail will be critical as you operate curing ovens and monitor time-sensitive materials, ensuring that all processes adhere to established specifications. Additionally, you will collaborate with team members to maintain an efficient workflow, contributing to a safe and compliant work environment.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
Spray and/or brush prime, finish prime, and protective coatings to aircraft detailed parts and assemblies in accordance with blueprints and specifications.
Prepare surfaces to ensure proper adhesion, including the removal of corrosion and paint stripping, as well as performing chemical reactivation of painted surfaces.
Perform rework and touch-up painting using spray and brush techniques per BAC specifications.
Prepare various paint materials, such as primers, enamels, and lacquers, according to BAC specifications.
Clean and service spray guns, paint tanks, brushes, hoses, and related equipment after use.
Mask and unmask areas as required to facilitate painting operations, following drawings and specifications.
Set up all equipment and supplies necessary to perform work assignments.
Operate curing ovens and related equipment, ensuring they function properly for the current painting process and documenting as required.
Monitor and maintain time-sensitive materials and processes, ensuring compliance with operational standards.
Review work instructions to support the division of work for incoming orders and ensure compliance with quality requirements.
Part mark and wrap finished parts and assemblies as required per BAC specifications.
Obtain and maintain necessary certifications and qualifications for the role.
Screen work instructions to ensure clarity and adherence to specifications.
Coordinate with team members to ensure efficient workflow and adherence to schedules.
Document equipment functionality and any adjustments made during the painting process.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications:
Experience prepping, cleaning, and painting various surfaces in industrial, commercial, or academic settings.
Experience using and maintaining various types of paint equipment and applicators, such as HVLP, pneumatic, electrostatic, and others.
Experience using basic math (e.g. addition, subtraction, multiplication, division, & ratios).
Experience handling and disposing hazardous materials per government regulations.
Ability to walk constantly throughout the workday; stand 6-8 hours per day; bend and twist frequently up to six hours per day; squat and kneel.
Ability to use and operate low impact vibratory tools (sander/buffer).
Ability to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all times.
Preferred Qualifications:
Experience performing aircraft or autobody painting and finishing operations.
Experience utilizing and following detailed work instructions.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
This position is for a variety of shifts.
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $23.32/hour, with potential to earn up to $47.54/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Mar. 31, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airlines is excited to offer opportunities for a Sealer Aircraft Integral Fuel Tank Components to join our Joint and Installation team in Everett and Renton, Washington.
As a Sealer for Aircraft Integral Fuel Tank Components, you will play a vital role in ensuring the highest standards of quality and safety in the sealing and assembly processes. Your responsibilities will include working from blueprints and specifications to clean surfaces, apply sealants, and prepare fuel vents for leak tests. You will also perform necessary rework and apply corrosion preventative seals to maintain the integrity of fuel tank components. Attention to detail is essential as you assist with pressure testing operations and coordinate effectively with supervisors and team members to ensure seamless communication across shifts.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
- Work from blueprints, documents, standards, and other required specifications to complete assigned tasks.
- Obtain daily work assignments from the team leader or supervisor and read Installation Plans and applicable drawings to determine work areas.
- Select appropriate cleaning solvents and clean interior and exterior surfaces prior to sealing.
- Load sealing guns and clean sealing equipment, ensuring proper functionality.
- Hand mix sealant as required and perform rework or pickups on assigned assemblies.
- Assist with pressure testing operations as assigned.
- Use specified agents and procedures for tasks such as removing protective coatings, applying corrosion inhibitors, and reactivating paint surfaces.
- Ensure proper grounding of the aircraft prior to cleaning operations and set up ventilation equipment to supply fresh air in work areas.
- Keep supervisors informed of progress and coordinate information with employees on other shifts.
- Mask areas as required to facilitate corrosion removal or painting operations.
- Prepare fuel vents for leak tests and restore them to normal after testing.
- Apply corrosion preventative seal as required and measure, layout, and apply aerodynamic seals to skin gaps on leading and trailing edge panels.
- Submit completed jobs or in-process checks to inspectors for acceptance or rejection.
- Apply decals, metalcals, placards, and charts to specific locations on parts and assemblies as required.
Physical Demands and Potential Hazards:
- Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
- Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
- Work in environments that may involve contact with metals, solvents, and coolants.
- Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
- Adapt to varying noise levels and atmospheric conditions.
- Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications:
1+ years of experience with paints, coatings, finishes, and/or sealants.
Experience in handling chemicals and/or hazardous materials.
Experience in prepping, cleaning, and painting various surfaces in industrial, commercial, or academic settings.
Experience working from heights & using fall protection equipment with weight limitations.
Experience with safety process and/or procedures in a manufacturing or operations environment.
Experience working with tools and following work instructions.
Preferred Qualifications:
1+ year of experience performing aerospace sealing.
Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.
Completed 1+ year of aerospace sealing in high school or community and technology college academic program.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
- Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
- This position is for a variety of shifts
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $25.00/hour, with potential to earn up to $51.82/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Aug. 28, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
