Jobs in Catawba, NC
91 positions found — Page 7
ESSENTIAL FUNCTIONS: • Perform freight handling using appropriate motorized and manual equipment, including but not limited to: forklift, pallet jack and hand truck.
• Verify documentation matches freight description (e.g.
type, weight, hazardous materials), using current electronic or manual system.
• Secure freight inside trailers using appropriate tools and supplies (e.g.
pallets, straps, rope).
• Recoup/repair damaged freight when necessary.
• Verify and complete required documentation and reports.
• Assist customers with freight and freight documentation as needed.
• Perform hostling duties if required.
• Comply with all applicable laws/regulations, as well as company policies/procedures.
• Perform other duties as required.
Disclaimer: This job description is general in nature and is not designed to contain or to be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to the job.
QUALIFICATIONS • High school diploma or equivalent, preferred.
• Must be at least 18 years of age.
• Prior experience in warehousing, freight handling and/or fork lift operations preferred.
• If hostler/yard mule duties required, experience preferred.
• Ability to count and perform basic math, with or without a calculator.
• Basic written and verbal communication skills.
• Ability to lift/carry hand freight of varying weights several times a week, to lift dock plates weighing approximately 100 pounds, and to open trailer doors requiring approximately 75 pounds of lift force, up to several times per day or more.
• Ability to bend, twist, squat, pushing/pulling freight throughout shift.
• Ability to work independently and/or as a team member.
• Previous dock/warehouse experience preferred.
WORKING CONDITIONS: • Dock environment; exposure to varied weather conditions, exhaust, fumes, dust, noise.
• Hours may vary due to operational need.
• Frequent contact with service center personnel; fast-paced, deadline oriented.
Preferred Qualifications: Shift Time: 0500
- 0900, 1700
- 2100 Pay Transparency: Pay: Additional Details: Starting Rate of Pay: $21.16 / hour FedEx Freight is an Equal Opportunity Employer, including disabled and veterans.
Know Your Rights Pay Transparency If you have a disability and you need assistance in order to apply for a position with FedEx Freight, please call 8 or e-mail at .
FedEx Freight will not discharge or in any other manner discriminate against any employee or applicant for employment because such employee or applicant has inquired about, discussed, or disclosed the compensation of the employee or applicant or another employee or applicant.
However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information.
The Brown Trucking driver experience is built around consistency, support, and respect. With flexible home time, strong dispatcher relationships, and competitive weekly pay, we give our drivers the tools to succeed—both on and off the road. Your transportation career deserves to call Brown home.
Now Hiring Regional Drivers in Charlotte, NC
Text APPLY to (8 to get your quick app started!
Average weekly pay: $1,100–$1,300
Home weekly
Mostly drop & hook freight
$1,000 driver referral bonus (paid within 90 days)
Monthly & quarterly driver incentives
Paid vacation, holidays, and orientation
Industry-leading, low-cost benefits after 60 days
401(k) with company match
Visit our hometown terminal:
11906 General Dr., Charlotte, NC
Driver Requirements
Valid Class A CDL
12 months of verifiable experience within the last 36 months
Excellent safety record
Clean MVR
No DWI/DUI in a commercial or private vehicle within the last 7 years
Apply today or text APPLY to (8 to start your regional driving career with Brown Trucking in Charlotte.
Medical Center is seeking a full-time BE/BC Gastroenterologist well-established high volume practice.
This is an exceptional opportunity to join a well-established, physician-led private practice with a proven record of success.
Only GI group in the County Call rotation: 1:7 (approx.
Medical Center is seeking a full-time BE/BC Otolaryngologist to join busy, general otolaryngology practice located in North Carolina offering the full range of pediatric and adult surgical and medical ENT care.
This is an exceptional opportunity to join a well-established, physician-led private practice with a proven record of success.
Beautiful facilities! Outpatient only with 4 1/2 day work week!This is an employed position with an independently owned 250 bed hospital!Receive a highly competitive salary with excellent benefits with relocation and sign on bonus and much more.This city offers numerous cultural opportunities as well as sports activities, on land and water with several progressive school systems! And be minutes from the largest city in North Carolina!
Your Healing Mission Matters As a Gastroenterology APP at Frye Regional Medical Center in Hickory, NC you will be inspired by the community you serve as a valued member of the Lifepoint Health team, a nationally recognized healthcare organization committed to caring with a local heart.
You'll have access to the staff, resources, and technologies needed to make a meaningful impact on patient care while contributing to a positive, collaborative work environment.
Compensated Surrogacy Opportunity - Make a Life Changing Impact and Earn $60,000+
Newborn Advantage Surrogacy is seeking qualified women to become gestational surrogates and help intended parents grow their families. As a gestational surrogate, you will carry a pregnancy created through IVF for intended parents, with no genetic connection to you.
Surrogates receive competitive compensation starting at $60,000+, with additional payments included throughout the surrogacy journey that are designed to support and benefit you. We would love to connect and share more details about this meaningful opportunity.
Eligibility Requirements
- Between 21 and 40 years of age
- Maintain a healthy lifestyle and meet clinic BMI guidelines (30 or below)
- Non-smoker
- Have had at least one healthy, full-term, uncomplicated pregnancy and delivery
- Free of sexually transmitted diseases
- Willing to complete medical, psychological, and background screenings
- Reside in the United States and attend required medical appointments
- Be raising your child(ren) in a stable home environment
About Us
Newborn Advantage Surrogacy is a boutique, mother–daughter led agency with over 20 years of experience supporting both intended parents and surrogates through every step of the surrogacy journey. We offer a truly hands-on, white-glove experience, providing personalized care, direct communication, and dedicated support throughout each surrogate's journey. You are never just a number—your experience, comfort, and well-being always come first.
Compensated Surrogacy Opportunity - Make a Life Changing Impact and Earn $60,000+
Newborn Advantage Surrogacy is seeking qualified women to become gestational surrogates and help intended parents grow their families. As a gestational surrogate, you will carry a pregnancy created through IVF for intended parents, with no genetic connection to you.
Surrogates receive competitive compensation starting at $60,000+, with additional payments included throughout the surrogacy journey that are designed to support and benefit you. We would love to connect and share more details about this meaningful opportunity.
Eligibility Requirements
- Between 21 and 40 years of age
- Maintain a healthy lifestyle and meet clinic BMI guidelines (30 or below)
- Non-smoker
- Have had at least one healthy, full-term, uncomplicated pregnancy and delivery
- Free of sexually transmitted diseases
- Willing to complete medical, psychological, and background screenings
- Reside in the United States and attend required medical appointments
- Be raising your child(ren) in a stable home environment
About Us
Newborn Advantage Surrogacy is a boutique, mother–daughter led agency with over 20 years of experience supporting both intended parents and surrogates through every step of the surrogacy journey. We offer a truly hands-on, white-glove experience, providing personalized care, direct communication, and dedicated support throughout each surrogate's journey. You are never just a number—your experience, comfort, and well-being always come first.
ESSENTIAL FUNCTIONS: Operate tractor-trailer combination, including doubles (and triples, where applicable) and/or straight trucks Perform daily pre-trip and safety inspections on equipment Hook/unhook trailers and converter dollies to/from a tractor and/or trailer Perform freight handling using appropriate motorized and manual equipment, including but not limited to: forklift, pallet jack and hand truck Secure freight inside trailers using appropriate tools and supplies, including but not limited to: pallets, straps and rope Recoup/repair damaged freight when necessary Verify and complete required documentation and reports Comply with hazardous material regulations and procedures Collect cash or checks for freight charges, as required, and maintain required documentation Follow dispatch instructions and communicate with dispatch as required, including but not limited to: delays, arrivals and equipment problems Communicate with customers to determine pick-up or delivery needs and solicit additional business Demonstrate internal and external customer service Ask for additional business from customers, and provide leads to sales for potential new opportunities May be required to perform chaining of vehicle tires May be required to perform job duties of a road driver or a dock employee where operationally necessary Comply with all applicable laws/regulations, as well as company policies/procedures Perform other duties as required Disclaimer: This job description is general in nature and is not designed to contain or to be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to the job.
QUALIFICATIONS Must possess a class A Commercial Driver’s License (CDL) with double/triple, hazardous materials and tank endorsements.
* Automatic transmission CDL restriction allowed.
Must possess one (1) year experience within most recent three (3) years or successful completion of FedEx Freight Driver Development Course Must possess acceptable Motor Vehicle Record (MVR) based on hiring standards Must meet all Department of Transportation (DOT) regulatory requirements under section 391 of the Federal Motor Carrier (FMC) regulations Long combination vehicles (LCV) (i.e.
Triple Trailers, Rocky Mountain Doubles, and Turnpike Doubles) are operated in the states of AZ, CO, FL, ID, IN, KS, MT, ND, NV, OH, OK, OR, SD and UT.
LCV Drivers in these states must meet the Long Combination Vehicles (LCV) Qualification and Certification Minimum Standards Ability to count and perform basic math, with or without a calculator Basic written and verbal communication skills (documentation, communication with peers, supervisors, etc.) Ability to lift/carry hand freight weighing up to 100 pounds several times a week.
Ability to sit for extended periods of time, bend, twist, squat, climb in and out of truck Ability to follow instructions and complete required training Ability to work independently and/or as a team member WORKING CONDITIONS: Drive throughout shift on all types of roads and in all types of weather Exposure to noise and vibration Exposure to dust and diesel fumes Exposure to hazardous materials shipped and packaged under DOT regulations Hours may vary due to operational need
*The Hazardous Materials endorsement must be obtained within 120 days of offer acceptance.
An employee will not be allowed to drive a commercial motor vehicle without this endorsement.
Preferred Qualifications: Pay Transparency: Pay: Additional Details: Starting Rate of Pay: $31.26 / hour FedEx Freight is an Equal Opportunity Employer, including disabled and veterans.
Know Your Rights Pay Transparency If you have a disability and you need assistance in order to apply for a position with FedEx Freight, please call 8 or e-mail at .
FedEx Freight will not discharge or in any other manner discriminate against any employee or applicant for employment because such employee or applicant has inquired about, discussed, or disclosed the compensation of the employee or applicant or another employee or applicant.
However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries regarding the following opportunity, please contact our Talent Specialist, Hari at (224) 507-1278 or Marshelin at (224) 507-1280 Title: Mechanical Installation Technician III
- 9 Openings Duration: 12 Months Location: Newton, NC Travel Requirements: Project locations will range from Newton NC and Hickory, NC.
Schedule: Monday
- Friday, 8 AM
- 5 PM Hours of work/work schedule/flex-time: 40 hrs (overtime expected).
Due to the project timing; overtime and periodic off-hours coverage may be necessary to successfully complete workload and interact with other team personnel.
Note: Local candidates only Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Scope of Position: This position is in the Engineering Project and is focused on capacity additions and the associated line installations and debug from a mechanical perspective.
Lead and/or participate on manufacturing engineering projects and support teams for the purposes of capacity installations, equipment debug, and preparing line/associated parts for Operations Receivership.
As a supporting team member, provide mechanical discipline to proactively identify technical problems through root cause understanding coupled with robust industrialized solutions relative to line debug and installs.
Leverage knowledge of mechanical engineering, machining and designing processes to improve performance of equipment/manufacturing process.
Support the development and execution of project plans to deliver timely error-free mechanical support for multi-line equipment installations Experienced with working along-side vendors and suppliers to resolve technical issues to protect scope, timing, and cost metrics.
Ability to work across various functional groups on a daily basis to accomplish goals Day to Day Responsibilities: Maintain safe work practices, inform others of hazardous conditions or personal practices as expressed on project team.
Manage installation and debugging activities to meet milestone and timeline objectives for successful capacity adds.
Design and implement mechanical solutions and process changes to improve capability of manufacturing equipment.
Solve mechanical and process issues through data analysis, experience, and collaboration with subject matter experts Manage spare part identification and storeroom entry as recommended by suppliers or peer engineers; noting available spares within (2)-plant footprint.
Develop and update engineering and operations documentation.
Support training for operations workforce regarding equipment or operations changes Perform advanced troubleshooting, diagnosis, and repair of mechanical systems, equipment, and machinery (e.g., pumps, motors, conveyors, hydraulics, pneumatics, etc.).
Align, test, and calibrate mechanical systems after installation.
Diagnose complex mechanical failures and recommend effective solutions.
Interpret blueprints, schematics, and technical manuals to support troubleshooting and repair activities.
Identify opportunities to improve equipment reliability, efficiency, and safety.
Collaborate with other departments to implement process improvements.
Required Skills: Ability to learn new technology and processes quickly Strong technical fundamentals with mechanical engineering skills Ability to multitask and prioritize work on an independent basis in a fast-paced project install manufacturing environment.
Proficient with PC software including Microsoft Office Suite Strong communication skills Expertise in mechanical systems such as hydraulics, pneumatics, bearings, gear systems, and conveyor systems.
Ability to read and interpret technical drawings, blueprints, and schematics.
Proficiency in using hand tools, power tools, and diagnostic equipment.
Strong problem-solving, analytical, and critical-thinking skills.
Knowledge of safety regulations and practices in an industrial setting.
Basic computer skills for maintaining records and using CMMS (Computerized Maintenance Management Systems).
Qualifications Required Education: o Associates degree Required Years and Area of Experience: 3 years' experience in new equipment installations in manufacturing environment.
Start-up experiences a plus Experience in fast-paced changing environment with multiple priorities Certifications: Relevant mechanical or industrial certifications (e.g., Millwright, HVAC, or Welding) are a plus.
OSHA or other safety certifications may be required.
Desired Skills: Hands on experience in commercial manufacturing equipment Project leadership/management experience (including milestone management and financial ownership) Experience in vendor/supplier management on-site/off-site Experience with CAD Detail oriented and able to perform with limited supervision.
Soft Skills: Ability to work and effectively collaborate within a team Ability to allocate/supervise resources to accomplish aggressive project milestones and timeline within specification and costs.
Able to shift tasks quickly Able to prioritize and multitask Communicate effectively both verbal and written Interview: 1 Teams interview, potential follow up onsite visit.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
CAD, Microsoft Office Suite, CMMS, Technical Fundamentals
